COTX X3 Hotspot USER MANUAL
1. Introduction COTX-X3 Hotspot is next generated of low-power IoT smart converged indoor gateway independently developed by Beijing COTX Networks Technology Co. Ltd. (COTX). It is a indoor gateway which is compatible with Helium LongFi technology. And it is also support standard LoRaWAN protocol. It has rich connectors and display screen to show different working status easily. 2.
. Interface description BT/WIFI Atnenna Port
. LED and Screen Indicator Description Indicator type Indicator status Description OFF Non Power LED Blinking System Start LED Green Powern On LED Screen IP address BT Cloud and wifi Screen IP address BT Cloud and wifi press BT BUTTON 5 seconds will turn on Bluetooth Click the BT button and the screen will display the Ethernet IP and device status
. Use guide 1、Download the Helium App The application is available for both Android and iOS. You can manually search it or just scan the QR Code provided below: Android iOS: Figure 2: QR Codes 2、Power on the Cotx X3 hotspot Power on X3S device, plug in the cable access to the device , install the antenna.
Generally speaking, bluetooth will automatically turn on after power on and turn off after five minutes, press BT BUTTON 5 seconds will turn on Bluetooth. Click the BT button and the screen will display the Ethernet IP and device status.
5、Bluetooth scan find Cotx hotspot
6、onboarding sucess
Application scenarios Hotspot allows lorawan nodes to connect to the network. You can view hotspot device information and manage device configuration through the app.
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
