Infrared Thermometer User Manual Issue Date:April 10, 2020 Version:1.
Contents Introduction ················································································································ 1 Precautions ················································································································ 1 Indications for Use······································································································· 2 Symbol Definitions ····································································································· 2
Introduction Thank you for choosing Choicemmed infrared Thermometer (CFT-308). This thermometer is a high-quality product incorporating the latest technology and tested in accordance with international measurement. Please read these instructions carefully before using this product. Precautions Attentions • • • • • • • • • • • • • • • • • • • Use of this thermometer is not intended as a substitute for consultation with your physician.
Intended Use Infrared Thermometer is a reusable thermometer intended for the intermittent determination of human body temperature in a no touch mode using the center of the forehead as the measurement site on people of all ages. It can be used by consumers in the household environment and by healthcare provider. Symbol Definitions Symbols Definitions Follow instructions for use Attention Manufacturer’s name and address Manufacturing Date Type BF applied part WEEE disposal Serial No.
The infrared thermometer is designed for all ages, adults, infant and elders. It not only supports for human, but is able to take room/object temperature. Two modes are easily switchable. BEST THERMOMETER FOR BABY 1 second fast measurement with instant reading, just take the temperature without wake your baby up. FEVER INDICATING SYSTEM Equipped with fever warning system, the thermometer for fever will indicate temperature status with corresponding face expression and beeps.
2. Press and release power button to cycle through three age ranges. You may select: 36+months, 0-3 months, 3-36 months, the device will display as below: Note: The default age range is “36+months”. Measure Forehead Temperature Prepare for measurement: Follow these guidelines to take an accurate and reliable measurement. 1. The individuals being measured should be indoors for 30 minutes before taking a measurement. 2.
Fig. 2 Notes: • The measurements can be recorded and transmitted via Bluetooth (Bluetooth transmission is optional). The Bluetooth symbol will be lighted once the Bluetooth starts up, otherwise it will keep flashed. • The battery symbol indicates the remaining battery capacity. When voltage of the battery is low, the display flashes the low battery warning symbol . The device can still work until the battery life has 0% left. Read temperature Age range Normal Fever High fever 0-3 Months ≥35.8-≤37.
Memory Search 1. 2. Short press power button + scan button, the device will be powered on and default to records. Short press scan button to alternate and check last ten measurements (M1-M10), shown as in Fig. 5. Fig. 5 Notes: • Latest ten measurements of human temperatures can be memorized. • Long press the scan button to revert to age range selecting mode. Power Off • Long press power button for about 4s to turn the thermometer off.
1. Store thermometer in a dry location free from dust and contamination and away from direct sunlight. 2. The ambient temperature at the storage location should remain fairly constant and within the range of 13°F to 158°F ( -25°C~70°C). Specifications Type: No touch forehead thermometer Model: CFT-308 Lifetime: 5 years Power: 2 x AAA batteries Measuring distance: ≤0.4in (≤1cm) Measurement Range: 89.6°F~109.4°F (32°C~43°C) Resolution temperature range: 0.1°F(0.1°C) Laboratory Accuracy: 0.4°F for 95°F~107.
b) c) d) e) expenses and packaging not included. All components subject to wear are not included in the warranty. The repair or replacement performed during the warranty period shall not extend the warranty. The warranty is void in the following cases: repairs performed by unauthorized personnel or with non-original spare parts, defects caused by negligence or incorrect use.
Guidance and Manufacturer’s declaration – electromagnetic immunity-For all EQUIPMENT and SYSTEMS Guidance and Manufacturer’s declaration - electromagnetic immunity The CFT-308 Infrared Thermometer is intended for use in the electromagnetic environment specified below. The customer or the user of the CFT-308 Infrared Thermometer should assure that it is used in such an environment.
should be less than the compliance level in each frequency range. b Interference may occur in the vicinity of equipment marked with following symbol: NOTES 1 At 80 MHz and 800 MHz, the higher frequency range applies. NOTES 2 These guidelines may not apply in all situations, Electromagnetic propagation is affected by absorption and reflection structures, objects and people.