Installation Instructions

Installation instructions
Choose the appropriate installation location, and choose one of the following installation methods
according to the site environment.
Method 1 (Direct installation)
1.Select the appropriate mounting location and attach the positioning sticker to the installation
location.
2.Compare the positions of the four fixed holes (1, 2, 3, 4 fixing holes as shown in Figure 1),
opening a hole in the wall (recommended aperture 7mm, depth 35m) , Insert the plastic expansion
rubber plug into the hole to remove the positioning sticker.
3.Connect the reserved cable to the device.
4. Open the cover (recommended by suction cup or plastic cymbal), screw the four screws (M4*40) into
the expansion plug to secure the device to the wall.
5.Reinstall the cover back into the device.
Method 2 (86 box installation)
1.Install 86 boxes of repairs in 86 boxes.
2.Connect the reserved cable to the device.
3. Open the cover (recommended by suction cup or plastic cymbal), screw the screws (M4*45) into
the four screw holes (as shown in Figures 2, 5, 6, 7, 8) to ensure that the device is fixed to the 86 box.
4.Reinstall the cover back into the device.
Dimensions (Unit：mm)
Rotatable Angle：90°~65°,-35°~35°
25°
145 106
275
35° 35°
15
Manual
Cover
Power on
Figure 1
Figure 4
Figure 2
1 2
3
4
5
6
7
8
Installation method 1
Installation method 2
Fixed hole
Positioning sticker
86box
The height line of camera
安装贴纸：将该贴纸贴到要安装的位置，根据图标来做打孔，布线等操作。
279-00127-01
86 boxes of repair
Alarm button
Figure 3
60mm