Specifications

Specifications
Input: DC 5V/2A 9V/1.67A
Output: 5V/1A 9V/1.1A
Charging Distance: <8mm
Charging efficiency: > 75%
Quality certification: QI/FCC/CCC/CE/RoHS
Supporting Fast Charging: QC2.0/QC3.0
Compatibility: Compatibility with QI
Instructions
Before using the product, please read the instructions
carefully and keep them properly.
Product introduction
This wireless charger uses a new technology. The combination of science and
technology with nature brings you an extraordinary texture. Before using the
product, please read the instructions carefully and keep them properly.
10W wireless charger X 1
80x120(mm)
Packaging components
Charging area
Power Interface
Indicator light
Type-C USB cable X1 QC3.0 Adapter X1 Instructions X1
Instructions
wireless
charging
smart
chip
wide
compatibility
safety
protection
Safeguard
Guidelines for Use
Attention
The QI standard wireless receiver device is positioned in center of the wireless charger.
Supporting iPhone 8, iPhone 8
plus; Samsung Galaxy series
(S8+, S8, S7, S7dge,S6, S6dge,
S6ege+, Note5, Nexus 4/5/6,
etc.
Insert the Type-C USB plug into the power interface. After the plug is
connected to the power supply, the red and blue lights will turn on 0.5S at
the same time and then turn off, indicating that the product is in standby
state.
Place the wireless charger smoothly. Place the QI standard wireless
receiver facing the wireless charging center. The blue light starts to
breathe and flicker, that is, charging normally. Supports Samsung 10W,
Apple 7.5W, ordinary 5W wireless charging.
When an abnormal state occurs, the indicator lights are red and flashing.
Optimum charging position
Frequency bands
Product compatibility
Over charge
protection
Over voltage
protection
Over current
protection
Over power
protection
Short-circuit
protection
Over heat
protection
Frequency Band
111.38kHz to 148.08kHz
-20.19 dBμA/m @ 10m distanceH-Field
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. This transmitter must
not be co-located or operating in conjunction with any other antenna or transmitter.
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Specifications
Input: DC 5V/2A 9V/1.67A
Output: 5V/1A 9V/1.1A
Charging Distance: <8mm
Charging efficiency: > 75%
Quality certification: QI/FCC/CCC/CE/RoHS
Supporting Fast Charging: QC2.0/QC3.0
Compatibility: Compatibility with QI
Instructions
Before using the product, please read the instructions
carefully and keep them properly.
Product introduction
This wireless charger uses a new technology. The combination of science and
technology with nature brings you an extraordinary texture. Before using the
product, please read the instructions carefully and keep them properly.
10W wireless charger X 1
Packaging components
Charging area
Power Interface
Indicator light
Type-C USB cable X1 Instructions X1
Instructions
wireless
charging
smart
chip
wide
compatibility
safety
protection
Safeguard
Guidelines for Use
Attention
The QI standard wireless receiver device is positioned in center of the wireless charger.
Supporting iPhone 8, iPhone 8
plus; Samsung Galaxy series
(S8+, S8, S7, S7dge,S6, S6dge,
S6ege+, Note5, Nexus 4/5/6,
etc.
Insert the Type-C USB plug into the power interface. After the plug is
connected to the power supply, the red and blue lights will turn on 0.5S at
the same time and then turn off, indicating that the product is in standby
state.
Place the wireless charger smoothly. Place the QI standard wireless
receiver facing the wireless charging center. The blue light starts to
breathe and flicker, that is, charging normally. Supports Samsung 10W,
Apple 7.5W, ordinary 5W wireless charging.
When an abnormal state occurs, the indicator lights are red and flashing.
Optimum charging position
Frequency bands
Product compatibility
Over charge
protection
Over voltage
protection
Over current
protection
Over power
protection
Short-circuit
protection
Over heat
protection
Do not use or place this product in high temperature or humid environment.
Do not expose to sunlight.
Do not throw this product into fire or water, in order to avoid leakage,
short circuit or other faults.
Do not cover the product with paper or other objects.
Frequency Band
111.38kHz to 148.08kHz
-20.19 dBμA/m @ 10m distanceH-Field
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. This transmitter must
not be co-located or operating in conjunction with any other antenna or transmitter.
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference;
(2) This device must accept any interference received, including interference that may
cause undesired operation