Brochure

Universal Eects Pedal Floor Board
with 9 V DC Power Supply and
Patch Cables
Ultra-compact and lightweight pedal
board for transporting up to 6 eects
pedals, including patch cables
Generous 1.7 A power adapter
included for powering more than
12 devices*—includes
1 x 6 daisy-chain cabling
Ultra-rigid plastic design withstands
even heavy impact
High-quality components and
exceptionally rugged construction
ensure long life
Conceived and designed by
BEHRINGER Germany
* Depends on the power consumption of the eects pedals, etc.
When eects are an integral part of
your rig, their power adapters and patch
cables can often be the most vulnerable
part, and the most likely to sabotage your
set if they're not pampered. Rather than
tossing your pedals, power adapters and
all other cabling into a duel bag after a
gig, keep them safe—and ready to rock at
a moment’s notice—with the PB600.
It's all about connections
This awesome pedal board
makes hooking up six 2.5 x 4.5"
pedals as easy as hooking up just one
(of course, if you're using pedals that
aren’t 2.5 x 4.5", the snug foam padding
can be cut to accommodate pedals of
varying shapes). The PB600 includes ¼"
patch cables, so you can leave your pedals
connected to one another, ready to pass
signal even when you’re transporting
them. It also comes with 1x6 daisy chain
cabling so that when you plug in the
1.7 A power adapter, all your pedals
receive power. Meanwhile, all cabling
remains safe and free of strain. Failure is
almost guaranteed when you’re dealing
with a rat’s nest of loose cabling, but with
the PB600, your eects chain is always safe
and organized.
Connect your guitar, bass or
keyboard to the single ¼" input in the
upper right corner of the board. A pair
of ¼" FROM EFFECTS jacks in the upper
left corner allow you to connect stereo
eects, and two ¼" OUTPUT TO AMP jacks
send a left and right stereo signal to up
to two amps.
When it’s time to load out, just unplug
the power supply, disconnect your guitar
and amp, put the lid back on the PB600
and slide the locking latches back into
place. The heavy-impact plastic casing
will protect your pedals from the very
worst dings, scrapes and scratches the
road throws your way.
PEDAL BOARD
PB600
Stompbox Accessories