MONITOR SPEAKERS Version 1.
MONITOR SPEAKERS MS16 IMPORTANT SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this device near water. This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosurevoltage that may be sufficient to constitute a risk of shock. 6) Clean only with a dry cloth. 7) Do not block any ventilation openings.
MONITOR SPEAKERS MS16 MONITOR SPEAKERS 2-Way Active Personal Monitor System MS16 s Compact stereo speaker system ideally suited for home studios, multimedia applications, keyboard and vocal monitoring etc. s Powerful 4" woofer and high-resolution tweeter powered by two 8-Watt amplifiers s Dedicated volume, bass and treble controls for more flexibility s Stereo RCA inputs for sound cards, keyboards etc. which can be used simultaneously with second stereo source (e.g.
MONITOR SPEAKERS MS16 1. INTRODUCTION Thank you very much for expressing your confidence in us by purchasing the BEHRINGER MONITOR SPEAKERS MS16. The MS16 are active loudspeakers that can be used in a variety of applications, e.g. for your computer setup, MIDI studio or to monitor your keyboards and playbacks. For utmost flexibility, the MS16 feature a broad range of connection options. Two stereo inputs enable you to connect two sound sources.
MONITOR SPEAKERS MS16 2. CONTROL ELEMENTS AND CONNECTIONS Left speaker Right speaker Fig. 2.1: Control elements and connections MICROPHONE INPUT (1/4" TRS). This connector allows you to connect your dynamic microphone. Turn the MIC LEVEL control to adjust the volume of your microphone. This control should be set fully counterclockwise when connecting a microphone. When all connections are made, slowly start raising gain. BASS control. Turn the bass control to adjust the bass level. TREBLE control.
MONITOR SPEAKERS MS16 Use INPUT 2 (RCA) to connect your soundcard, keyboard or expander. + You can play back various signals by using both stereo inputs simultaneously. SPEAKER TO LEFT connector. Connect both speakers by using the speaker cable included in this package. As soon as both speakers are properly connected, they will function as a stereo speaker system. SPEAKER FROM RIGHT connector. Insert the speaker cable from the SPEAKER TO LEFT connector. AC POWER input.
MONITOR SPEAKERS MS16 Fig. 3.2: Computer/keyboard setup The MS16 are magnetically shielded which allows you to place them near your computer monitor without causing interference or damage. Do not place your MS16 near power amps to avoid induced hum. To avoid feedback noise, do not get too close to the speakers with a microphone. In case of feedback, change the position of the microphone relative to the speakers or reduce the volume level. 4. SPECIFICATIONS Loudspeaker Tweeter Woofer Ø 38 mm (1.
MONITOR SPEAKERS MS16 5. WARRANTY § 1 WARRANTY CARD/ONLINE REGISTRATION To be protected by the extended warranty, the buyer must complete and return the enclosed warranty card within 14 days of the date of purchase to BEHRINGER Spezielle Studiotechnik GmbH, in accordance with the conditions stipulated in § 3. Failure to return the card in due time (date as per postmark) will void any extended warranty claims.