Version 1.2 August 2002 www.behringer.
EURORACK UB502/UB802/UB1002/UB1202 SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: All the safety and operation instructions should be read before the device is operated. Retain Instructions: The safety and operating instructions should be retained for future reference. CAUTION: WARNING: To reduce the risk of electric shock, do not remove the cover (or back). No user serviceable parts inside; refer servicing to qualified personnel.
EURORACK UB502/UB802/UB1002/UB1202 TABLE OF CONTENTS 1. INTRODUCTION ......................................................................................................... 4 1.1 General mixing console functions .................................................................................................................... 4 1.2 The users manual ............................................................................................................................................ 4 1.
EURORACK UB502/UB802/UB1002/UB1202 FOREWORD 1. INTRODUCTION Dear Customer, Im sure youre one of those people who have devoted themselves body and soul to your chosen area and no doubt this has transformed you into an expert in your field! Well, for over 30 years, my passion has been music and electronics. This not only led me to establish BEHRINGER, but also enabled me to convey and share my enthusiasm with my employees.
EURORACK UB502/UB802/UB1002/UB1202 For the moment, just try and trace the signal path from the microphone input to the FX send connector. Dont be put off by the huge range of possibilities; its easier than you think! If you look at the overview of the controls at the same time, youll be able to quickly familiarize yourself with your mixing console and youll soon be making the most of all its many possibilities. 2.1 Mono channels 2.1.
EURORACK UB502/UB802/UB1002/UB1202 2.1.3 FX sends, panorama and level adjustment Fig. 2.5: The equalizer of the stereo input channels A stereo EQ is highly preferable to two mono equalizers. when working on a stereo signal, as two separate EQs will usually produce an unwanted discrepancy between the left and right channels. Fig. 2.
EURORACK UB502/UB802/UB1002/UB1202 device will then have to be brought back into the console via a normal stereo channel. This does, however, give you the ability to use the channel EQ on the effects return signal if you wish. + When using a stereo channel as effects return path, the FX control of the relevant channel should generally be turned fully down to avoid undesirable feedback. Fig. 2.11: Tape input/output If only the left connector is used, the AUX RETURN automatically operates in mono.
EURORACK UB502/UB802/UB1002/UB1202 +48 V (UB802/UB1002/UB1202 only) The red +48 V LED lights up when phantom power is on. The PHANTOM switch activates the phantom power supply on the XLR connectors of all mono channels. + + Caution! Never use unbalanced XLR connectors (PIN 1 and 3 connected) on the MIC input connectors when using the phantom power supply. Please do not connect microphones to the mixer (or the stagebox/wallbox) as long as the phantom power supply is switched on.
EURORACK UB502/UB802/UB1002/UB1202 4. SPECIFICATIONS Mono inputs Microphone inputs (IMP Invisible Mic Preamp) Type XLR, electronically balanced, discrete input circuit Mic E.I.N. (20 Hz - 20 kHz) @ 0 Ω source resistance -134 dB / 135.7 dB A-weighted @ 50 Ω source resistance -131 dB / 133.3 dB A-weighted @ 150 Ω source resistance -129 dB / 130.5 dB A-weighted Frequency response <10 Hz - 150 kHz (-1 dB), <10 Hz - 200 kHz (-3 dB) Gain range Max.
EURORACK UB502/UB802/UB1002/UB1202 5. WARRANTY § 1 WARRANTY CARD/ONLINE REGISTRATION To be protected by the extended warranty, the buyer must complete and return the enclosed warranty card within 14 days of the date of purchase to BEHRINGER Spezielle Studiotechnik GmbH, in accordance with the conditions stipulated in § 3. Failure to return the card in due time (date as per postmark) will void any extended warranty claims.