User Manual ULTRABASS BT108 Ultra-Compact 15-Watt Bass Amplifier with VTC-Technology and Original 8" BUGERA Speaker
ULTRABASS BT108 User Manual Table of Contents Thank you........................................................................ 2 Important Safety Instructions....................................... 3 1. Introduction................................................................ 4 1.1 Before you get started....................................................... 4 1.1.1 Shipment........................................................................... 4 1.1.2 Initial operation..........................
ULTRABASS BT108 User Manual ImportantSafety Safety Important Instructions Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
ULTRABASS BT108 User Manual 1. Introduction VTC Virtual Tube Circuitry The VTC Virtual Tube Circuitry was specially developed to lend the bass sound the unique character of classic tube amps. Jam it up! With its CD player input, your BT108 is the ultimate practice amp, because it couldn’t be easier to play along to your favorite music. If you don’t want anybody listening to what you’re playing, or simply wish to avoid disturbing the neighbors, just use your headphones.
ULTRABASS BT108 User Manual 2. Wiring Tips Figures 2.1 and 2.2 show you how to connect your bass to the amplifier. If you want to use an effects unit (for example, the BEHRINGER X V-AMP PRO) to experiment with some out-of-the-ordinary sounds, you can connect your bass directly to the input of the unit. Then, connect a second cable from the effects output to the input on your bass amp. Fig. 2.
ULTRABASS BT108 User Manual (1) Connect your bass to the INST. INPUT jack, using a standard cable with a 1/4" TS connector. (2) Use the VOLUME control to adjust the volume of the instrument channel. To change the instrument-to-CD volume ratio, use your instrument’s volume control. (3) Use the CD INPUT to connect the output of your CD player, tape deck, CD or MD walkman. This way you can play along to music or bass guitar tutorial CDs. This connector is a 1/4" TRS jack.
ULTRABASS BT108 User Manual 5. Specifications Inputs Instrument input Connector 1/4" TS mono connector CD or audio input Connector 1/4" TRS stereo connector Outputs Headphones output Connector 1/4" TRS stereo connector System data Output stage power 15 Watts Loudspeaker Type 8" special custom-made loudspeaker Impedance 4Ω Power rating 20 Watts Power supply Mains voltage USA/Canada 120 V~, 60 Hz U.K.
We Hear You