Quick Start Guide BH470NC Premium High-Fidelity Headphones with Bluetooth Connectivity and Active Noise Cancelling V 1.
Important Safety Information Accessories List • • • • • • • • • • • • • • • • • • • • • • • Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.
Controls Charging/Bluetooth LED Control buttons ANC on/off switch Low Battery Warning When the battery voltage drops below 3.0 V, there will be a warning beep every 60 seconds. The headphones will automatically switch off when the battery voltage drops lower then 2.9 V. WARNING: Avoid the following: ANC indicator LED USB charging port 1⁄8" audio jack Microphone NFC logo Getting Started Charging • Before use, please read this quick start guide carefully and keep it in a safe place.
Bluetooth pairing You will hear voice prompt for pairing after power on. Please refer to function map table for other functions. NFC (Near Field Communication): You can also pair your headphones to a Bluetooth device by using the built-in NFC function. To pair with NFC, simply bring your Bluetooth device physically close (within 5 cm or 2 inches) to the NFC marking on the headphones.
Other important information Register online. Please register your new Music Tribe equipment right after you purchase it by visiting behringer.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable. Malfunction.