SDS

DRAFT VERSION
SAFETY DATA SHEET
1. Identification
BEHR Water-Based Fast-Drying Polyurethane MatteProduct identifier
Other means of identification
B8106
Product code
Architectural Coating
Recommended use
None known.
Recommended restrictions
Manufacturer/Importer/Supplier/Distributor information
Behr Process Corp.
Supplier
1801 E. St. Andrew Place
Santa Ana, CA 92705
714-545-7101
Telephone
[phone]
Emergency telephone
[phone]
335213
Access code
2. Hazard(s) identification
Not classified.
Physical hazards
Category 1Sensitization, skin
Health hazards
Not classified.
OSHA defined hazards
Label elements
Signal word
Warning
Hazard statement
May cause an allergic skin reaction.
Precautionary statement
Prevention
Avoid breathing mist/vapors. Contaminated work clothing must not be allowed out of the
workplace. Wear protective gloves.
Response
If on skin: Wash with plenty of water. If skin irritation or rash occurs: Get medical advice/attention.
Wash contaminated clothing before reuse.
Storage
Store away from incompatible materials.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazard(s) not otherwise
classified (HNOC)
None known.
Supplemental information
None.
3. Composition/information on ingredients
Mixtures
8002-74-2 1 - 3Paraffin waxes and
Hydrocarbon waxes
CAS number %Chemical name
1071-93-8 0.1 - 1Adipic acid dihydrazine
The manufacturer has claimed the exact percentage as trade secret under the OSHA Hazard
Communication Standard.
Composition comments
BEHR Water-Based Fast-Drying Polyurethane Matte SDS US
951035 Version #: 00 Revision date: Draft version. Issue date: Draft version.
1 / 6