2001URF Wireless Keyboard & Mouse Kit User’s Guide Version 1.
The information in this document is subject to change without notice and does not represent a commitment on the part of the vendor. No warranty of representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular purpose of this document. The manufacturer reserves the right to make changes to the content of this document and/or the products associated with it at any time without obligation to notify any person or organisation of such changes.
Table of Contents 1 Introduction.................................................................................................1 What's in this package ..............................................................................1 2 System Requirements ................................................................................3 3 Hardware Installation ................................................................................5 4 Software Installation .....................................
1 Introduction Congratulations on your purchase of the 2001URF wireless keyboard and mouse kit! This keyboard and mouse kit will finally free you of the constraints of your desktop by providing a wireless connection between the keyboard or mouse and your PC.
2 A driver disc A user's guide Batteries (4 pcs of AA alkaline batteries)
2 System Requirements MicrosoftWindows98, WindowsME, Windows2000 or WindowsXP operating system Microsoft Internet Explorer 5.0 or later version (for the Internet keys) The system supporting ACPI or APM II (for power management buttons) ATX mother board and ATX power supply (for power management buttons) Please refer to below table for the other system requirements for the 2001URF’s various features.
Shortcut Function 4 CD for details) CD for details)
3 Hardware Installation Step 1: Make sure your PC is switched off. Step 2: Connect the receiver to your PC by plugging in the receiver’s plug into the USB port of your PC. Front View of Receiver Plug Back View of Receiver Plug Step 3: Take the keyboard and make sure the batteries on the back are installed correctly. (Follow the polarity signs in the battery compartment.) ID Button 1.5V 2pcs Bottom View of Keyboard Step 4: Take the mouse and make sure the batteries on the back are installed correctly.
2. Battery life is approximately 3-4 months, depending on the intensity of usage.
3. Make sure the receiver is placed in a location where is relatively free of strong electromagnetic or transmission sources in order to ensure optimal reception of the keyboard and mouse signal. ID Setting This wireless keyboard kits have 256 sets ID in each unit. This extra IDrecognition function helps to protect against interference from other RF keyboards in the same environment. After completing the hardware installation you must set the ID of the receiver, mouse and keyboard.
Remarks: 1. You must follow the procedure above to set the ID of receiver, mouse and keyboard. Once the receiver ID button is pressed you have 35(30??) seconds to complete the entire process, or you will need to begin again. 2. Once the keyboard and receiver are plugged in, the yellow receiver light will flash. Once the ID is set, it will remain steadily lit.. 3. When changing the batteries of keyboard or mouse, there is no need to reset all the ID’s. Simply reset one of them. 4.
Figure 2 9
4 Software Installation After finishing the hardware installation as described above and starting up your PC, you should be able to immediately take advantage of the wireless function of the 2001URF wireless keyboard and mouse kit. If the keyboard and mouse are not working properly, then please check Chapter 6 Troubleshooting for tips on how to solve your problem. 4.
5 Using Keyboard and Mouse 5.1 Using the Keyboard Besides the usual keys, this keyboard also has extra-dedicated keys, which provide the following ACPI and Internet functionality: Please note: In order to use these keys under Windows 98, it is necessary to have the KeyMaestro keyboard driver installed. Please refer to Chapter 4 for more information. Sleep put your system to sleep (power-saving) mode. Any key will wake up your system and return to the previous working status.
5.2 Using the Mouse Driver After installing the mouse driver as described in Chapter 4 you will be able to start up the Mouse Control Panel by left double-clicking on the KeyMaestro Mouse icon in the Windows task bar. This should appear after restarting your machine. You can also invoke the Mouse Control Panel by choosing Start→Programs→MMaestro →KeyMaestro Mouse Driver.
upwards.
The Definition of Mouse Extra Function: Function Definition Quick Jump Let you to open 8 special functions quickly. For the detailed, please refer to the ”Quick Jump Function Introduction” in next section. Double Click Replace the "double click" movement to activate an application or function, it can save the valuable mouse-clicks. To magnify or de-magnify the data view of a document in an application that supports it.
Quick Jump Function Introduction Also, after installing the mouse driver and invoking the KeyMaestro mouse driver program you will have access to 9 special function icons by pressing the scroll wheel once. These 9 functions are: Mouse Control Panel Activate the Mouse Control Panel Menu. Control Panel Activate the “Control Panel” window. Set the cursor to the horizontal scroll bar to scroll the document Horizontal Scroll Bar horizontally.
clicking on the KeyMaestro Mouse icon in the Windows task bar and select Help.
6 Troubleshooting When the keyboard or the mouse doesn't work properly, please check the following: 1. Take out the receiver’s connector and check the receiver’s plug for possible broken pins. If the plugs appear normal then reinsert the plugs on your PC. 2. Check that if the batteries in the keyboard and mouse are installed correctly. Make sure the polarity of the batteries corresponds with the polarity signs in the battery compartment. 3.
unplug all items and refer to your dealer for further assistance. In these cases please refrain from using any of the items before consulting with your dealer! If above troubleshooting suggestions still do not solve your problem then please refer to your direct dealer for technical support.
FCC GUIDELINES This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications.
3100505080 Version 1.
