USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! ® Bedroom Forced Air Climate Comfort System with Remote Control & Bluetooth App This device is for residential home use only. It is not intended to be used in commercial, industrial, or human medical settings. PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR MAINTAIN THE PRODUCT.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! Letter from the Inventor: Thank you for purchasing the BedJet 3! I’m the inventor and founder of the company. When I went on ABC’s Shark Tank television show a few years ago, they told me nobody would ever want a BedJet. Now just a few years later I am so incredibly grateful our little start-up company in Rhode Island has blossomed into a great American success story.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! Personalized Sleep Solutions BedJet can be customized to your individual sleeping needs whether you sleep alone or with a partner. Before starting installation, review the options below to ensure you have ordered the very best setup for your needs. Important definitions: • • Single Zone installs have 1 BedJet on the bed.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! Pre-Installation Information About BedJet BedJet is a forced air climate comfort system designed with the latest technology just for your bedroom. BedJet is designed to be used as a permanent room air comfort device. The BedJet’s air outlet can also be streamed directly into your bed for even more personalized temperature control while sleeping.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! Pre-Installation Checklist Before installing your BedJet, please verify the following parts from your BedJet 3 package: BedJet 3 base unit Adjustable Height Mattress Mount Assembly Air Hose Color Screen Remote Control With 2 AA batteries Revision 1.0 www.bedjet.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! Status & Control Panel ON/OFF switch Low Power switch for Dual Zone setups with two BedJets in same bedroom. SEE SAFETY DETAILS BELOW. Expansion port used only for factory testing, not a functional USB port Low Power Switch: Follow the setup instructions on the remote control or App and the proper setting for the Low Power switch will be made for you automatically.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! Quick Install Guide 1) Locate parts for Mattress Mount Assembly.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! BedJet Using Your Own Sheets: SKIP THIS PAGE IF USING BEDJET CLOUD SHEET 3) If you are using your own sheets with the BedJet, determine the best location on your bed to install your Mattress Mount Assembly, which holds the Air Nozzle and Air Hose in place. Skip this step if using the BedJet Cloud Sheet. You can locate nearly anywhere except the head of the bed.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! BedJet Using a Cloud Sheet SKIP THIS PAGE IF USING YOUR OWN SHEETS 4) If installing your BedJet with the Cloud Sheet, determine the best location on your bed to install your Mattress Mount Assembly, which will hold the Air Nozzle and Air Hose in place. The Air Nozzle will insert into special sewn openings on the Cloud Sheet.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! 5) Slide the Mattress Mount base under your mattress in the location identified in Step 3 or Step 4. Slide the Mattress Mount base as deeply as possibly under the mattress until the Mattress Mount is flush against the mattress. The Mattress Mount will be used to secure the Air Hose and Air Nozzle assembly against the side of the bed.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! 7) Remove or add Height Extending Links to the Mattress Mount to adjust height so that bottom of the Air Nozzle rests comfortably on the top of the mattress. When finished, the Air Nozzle should project onto the mattress surface as shown. If additional Height Extending Links are needed for unusually thick mattresses, contact BedJet support at info@bedjet.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! 10) Insert supplied AA batteries into Remote Control. Battery installation is accessed by pushing and sliding the entire back cover off the remote per below: Remote control screen will light up. The remote control automatically wakes up when picked up. Follow and complete all initial setup instructions on remote control screen.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! 12) BedJet Cloud Sheet Install. Skip to Step 13 if using BedJet with your own sheets. Your engineered performance Cloud Sheet is as durable as your existing sheets for regular washing and will give you many years of service when properly cared for. See care label for washing instructions.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! With Cloud Sheet laid on bed, insert Air Nozzle into the opened elastic opening. Pull elastic opening as far down Air Hose as it will travel. The elastic opening must be pulled down far enough where the 2 sheet clamps on Hose Grip are inside the elastic opening.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! YOUR BEDJET IS NOW READY TO ENJOY!! HELP! NOT SURE IF BEDJET CAN FIT UNDER BED? Some bedframes with low hanging side rails may look like they cannot fit the BedJet underneath, but this is just the side rail and the under-mattress area may still have 6.25 inches height clearance. In these cases, the bed frame may be lifted up and the BedJet placed underneath.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! Cooling Mode - Tips for Better Enjoyment The BedJet cools via powered ventilation of fresh ambient air injected directly into the bed. This powered ventilation gently wicks away the body heat and body moisture that gets trapped in the bed by your mattress and bed covers.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! HELP! DON’T LIKE FEELING THE AIR BLOWING UNDER THE COVERS? Don’t blow BedJet air directly into your sleeping layer. Try adjusting Air Nozzle to inject air above your top sheet instead of below it and make sure you have another tightly knit layer of bedding above the Air Nozzle to guide the air through a sandwiched layer.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! Tips for Better Warming Enjoyment: • • • • Try using the Turbo Heat mode as a pre-heater five to ten minutes before you get into bed. Turbo heat can make your bedding feel like it just came out of the dryer in only 3 minutes. Get in with as few clothes on as you can and enjoy the cuddly warmth directly on your skin.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! Specifications The BedJet has been designed to operate as a safe extension of your bed. This product has been rigorously tested by an accredited 3rd party testing lab to be qualified as a safe electric appliance.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! Important Safety Instructions DANGER: TO REDUCE RISKS OF BURNS, ELECTRIC SHOCK, FIRE AND PERSONAL INJURY, THIS PRODUCT MUST BE USED IN ACCORDANCE WITH THE FOLLOWING INSTRUCTIONS.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! 8. Always plug this device directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip). 9. Do not operate this device with a damaged cord or plug or after the device malfunctions or has been dropped or damaged in any manner.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! b) Heaters draw more current than small appliances, overheating of the outlet may occur even if it has not occurred with the use of other appliances. c) During use check frequently to determine if your plug outlet or faceplate is HOT! d) If so, discontinue use of the heater and have a qualified electrician check and/or replace the faulty outlets. 21.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! THIS DEVICE IS A DOUBLE INSULATED PRODUCT: SERVICING OF DOUBLE-INSULATED PRODUCTS In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated product, nor is a means for grounding to be added to the product.
USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! Warranty BEDJET LLC gives to the original purchaser (“the purchaser”) of a new BedJet (“the product”) this limited express warranty which covers any defects in materials or workmanship in the product under normal use.