Users Manual Part 1

Device Configuration
Interface Setup – Wireless 5GHz
82
BEC 4700A / 4700AZ User Manual
a value between 1500 and 2347.
Fragmentation Threshold: The threshold (number of bytes) for the fragmentation boundary for
directed messages. It is the maximum data fragment size that can be sent. Enter a value between 256
and 2346, even number only.
DTIM Interval: This value, between 1 and 255, indicates the interval of the Delivery Traffic Indication
Message (DTIM).
Channel Bandwidth: Select 20 MHz, 40 MHz or 80MHz for the channel bandwidth. The wider the
Channel bandwidth the better the performance will be.
SSID Settings
SSID Index: 5GHz only support up to 1 SSID.
SSID: The SSID is the unique name of a wireless access point (AP) to be distinguished from another.
For security propose, change the default SSID to a unique ID name to the AP which is already built-in
to the router’s wireless interface. Make sure your wireless clients have exactly the SSID as the device,
in order to get connected to your network.
Broadcast SSID: Select Yes to make the SSID visible so a station can obtain the SSID through
passive scanning. Select No to hide the SSID in so a station cannot obtain the SSID through passive
scanning.
Client Isolation: (Known as AP Isolation) After enabling this feature, all Wi-Fi clients connect to the
same Access Point, in the same local wireless network, cannot interact with each another.
WPS Settings
WPS (Wi-Fi Protected Setup) feature is a standard protocol created by Wi-Fi Alliance. This feature
greatly simplifies the steps needed to create a Wi-Fi network for a residential or an office setting. WPS
supports 2 types of configuration methods which are commonly known among consumers: PIN Method
(Personal Information Number) & PBC Method (Push Button Configuration). BEC 4700A/AZ offers
PIN Method only.