Users Manual Part 1

Device Configuration

Hotspot – General Setting

BEC 4700A / 4700AZ User Manual

Hotspot

The Wi-Fi hotspot offers Internet access for mobile devices like smart phones, laptops, or smart pad

to connect wirelessly in public locations such as in coffee shops, train station, airport, hotel, and much

more. A captive portal with a login page will prompt on the mobile devices and require all Wi-Fi clients

to accept the term of use before accessing to the Internet.

General Setting

Hotspot: Activate to enable the Wi-Fi hotspot feature.

Interface: Select Wi-Fi interface(s), example: BEC110 (2.4GHz) to handles the hotspot traffic.

IP Address: The IP address for the Wi-Fi hotspot network.

IP Subnet Mask: Enter the subnet of the network.

Primary / Secondary DNS Server: Enter the IP addresses of the DNS servers. The DNS servers are

passed to the DHCP clients along with the IP address and the subnet mask.

 Authentication: Username and Password (credential) is required to join the hotspot network.

Go down to the Authentication section below and select a method.

 Agreement: No Username and Password is required. Automatically login to the hotspot

network after accepting and agreeing to the terms (“Terms”) of use.

Redirect URL after Successful Login: Enter the URL (http:// is not required). After Wi-Fi client is

successful login to the network, the page will get redirected to this URL.

OR leave it blank to stay in current page.

NOTE: This new URL will be added to the Walled Garden automatically.