Quick Start Guide

ManualsBrandsBeautiful ManualsElectronicsCharge Rise

Setting up for the First Time Use

For the first time setup, there is a need to setup the calendar and clock time.

1 When the unit is plugged in AC power first time, it enters system setup mode.

2 The “YEAR” will blink on the display.

3 Press the <

</>> buttons to set the current YEAR.

4 Press SNOOZE/DIMMER button to confirm the setting.

5 Repeat 3 and 4 above to adjust MONTH, DATE, HOUR, MINUTE and AM/PM.

6 Press the 12/24 button at the back to select 12/24 hour display format.

Notes:

If you want to change the date and the clock, simply press and hold the SET

button at the back for 3 seconds, then operate according to step 2 ~6 for

setting.

After the unit is out of power completely (no AC plugged and backup battery has

been drained), once the power is resumed, the unit will be reset to default

settings as the first time usage and the “year digit” will keep blinking to alert you

to set the date and the clock time again.

Setting the Daylight Saving Time (DST)

1 When daylight saving time begins, slide the DST switch to “1” position, it will add

one hour to the display time.

2 When daylight saving time ends, slide the DST switch to “0” position, the

displaytime will fall back one hour.

Using and Setting the Alarm

1. Press and hold the ALARM SET button and then press HOUR/MIN

buttons to set the desired alarm time.

2. Slide the ALARM switch to ON position to complete the alarm setting

and turn the alarm on.

3. If you want to turn the alarm off, simply slide the ALARM switch to

OFF position.

4. You can simply press the ALARM SET button to display the alarm

time you have set.

Using Snooze and Shutting off the Alarm

1. If you prefer to get some more sleep after the alarm goes off, simply

press SNOOZE/DIMMER button while the alarm is sounding. The

alarm sound will stop and the icon z will display on the screen. The

alarm will sound again after 10 minutes. (The snooze function will

repeat for 12 times.)

2. If you want to shut the alarm off completely, simply slide the ALARM

switch to OFF position to turn off the alarm.

Note: Remember to slide the ALARM switch to ON position for the

next day to wake you up.

Displaying the Date

Short press either HOUR or MIN button to show you today’s date.

Setting Screen Brightness

Press SNOOZE/DIMMER button repeatedly to change the screen brightness.

Charging your Mobile Devices

USB Charging

You can charge most phones as well as other USB chargeable devices directly

from Charge Rise. Simply connect your device to either USB ports in the front

of Charge Rise to begin charging.

The 1.0A port is for regular charging (phone).

The 2.1A port is for fast charging or charging bigger device (tablet).

Wireless Charging Pad

The wireless charging pad is 180° rotatable to fit your nightstand

or desktop setting. You can simply lock the charging pad in three

positions (front, left or right).

The charging pad provides up to 10W maximum power. Not all

phones are capable of fast wireless charging with full 10W of

power.

Note: Place the unit on a flat surface for the stability of your mobile

device during wireless charging.

Battery Replacement

here is a backup battery for keeping the clock time and the

date. When the level of backup battery is low, the low battery

indicator will appear on the display. It is the time to

replace the battery.

To replace the battery, unscrew the cover, then remove the

battery door. After replacing the battery, put back the battery

door and the screw.

Restoring to Default Setting

Press and hold SNOOZE/DIMMER button and the ALARM SET

button simultaneously for 5~6 seconds to reset the user setting

including ALARM TIME and DIMMER BRIGHTNESS to default

setting. Release both buttons when you see the “cLr ” message.

Powering up the Unit

1 Insert the DC plug of the supplied power adaptor into the DC IN jack.

2 Remove the battery insulation tape from the battery door.

Wireless Charging

CAUTION

BEFORE putting your mobile phone onto the wireless charging pad for

charging,

REMOVE YOUR CARDS including any magnetic stripe or RFID cards

(such as credit cards, transportation cards or key cards, etc.) placed/

inserted AT THE BACK of your phone or your phone protective case.

REMOVE METAL / MAGNETIC OBJECTS on the top of the wireless

charging pad (such as coins, keys or paper clips, etc.). No foreign object

should be placed between the phone and the charging pad during

charging.

REMOVE YOUR PHONE PROTECTIVE CASE if it consists of any metal

or magnetic part.

1. Place your phone(with built-in Qi charging function) on the wireless

charging pad. For the best result, please remove the phone protective case

before charging.

2. You may need to adjust or align your phone position on the charging pad

until the charging indicator is ON.

DST

SNOOZE/DIMMER

SET

12/24

Quick Start Guide

Charge Rise

Quick Start Guide

Charge Rise

Quick Start Guide

Charge Rise

Getting to know Charge Rise

Appears when snooze is active.

DST function is activated

DST

Appears when backup battery is LOW/no battery is installed

Appears when Alarm is switched ON

Flat size: 390 × 130 mm

Folded size: 130x130 mm

Material: 250g C2S

Printing color: Black

Qi (pronounced “chee”) is the WPC standard for wireless charging.

The “Qi” symbol is a trademark of the Wireless Power Consortium.

Summary of content (4 pages)

PAGE 1
Flat size: 390 × 130 mm Folded size: 130x130 mm Material: 250g C2S Printing color: Black Quick Start Guide Charge Rise Quick Start Guide Charge Rise Getting to know Charge Rise Quick Start Guide Charge Rise Setting up for the First Time Use For the first time setup, there is a need to setup the calendar and clock time. 1 When the unit is plugged in AC power first time, it enters system setup mode. 2 The “YEAR” will blink on the display. 3 Press the <> buttons to set the current YEAR.
PAGE 2
Charge Rise Quick Start Guide Using and Setting the Alarm HOUR MIN 1. Press and hold the ALARM SET button and then press HOUR/MIN buttons to set the desired alarm time. Setting Screen Brightness ALARM SET USB Charging ON 4. You can simply press the ALARM SET button to display the alarm time you have set. OFF CAUTION Using Snooze and Shutting off the Alarm SNOOZE/DIMMER switch to ON position for the Displaying the Date Short press either HOUR or MIN button to show you today’s date.
PAGE 3
SIZE: 127(W) x153(H)mm PRECAUTIONS FOR WIRELESS CHARGING 1. This unit will wirelessly charge Qi certified mobile phones. Devices with other wireless charging standard will not be supported (such as PMA wireless charging is not supported). Remove your THICK protective phone case for best charging performance. 2. Remove your protective phone case with metallic or magnetic parts before wireless charging your mobile phone or device. 3.
PAGE 4
This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.