Pocket Kick SFQ-10 User Manual
Safety Information electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. 11.
18. Do not place any naked flame sources, frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
For compatibility between the system and another device with Bluetooth technology, consult the device's documentation and dealer. In some countries, there may be restrictions on using Bluetooth devices. Check with your local authorities. Side View: 15 cm (5- 15/16") Back side Front side is a registered trademark of Bluetooth SIG, Inc (5-15/16") 10 cm (3- 15/16") Please read rating label at the bottom of system for power input and other safety information.
Contents Getting Started ............................................................................................ 6 Package Contents............................................................................................................................ 6 Charging the Built-in Battery ........................................................................................................... 6 Checking Battery Power ......................................................................................
Getting Started Package Contents Examine whether the following package contents are all included: Main Unit Quick Start Guide Quick Start Guide USB Power Cable Safety Card Safety Card Audio Cable Warranty Card Warranty Card Charging the Built-in Battery To charge the built-in battery of the system, connect the micro plug of the USB power cable to the USB power port of the system and the standard plug to USB power outlet such as PC USB port, USB power adapter.
During charging, the charging LED indicator combination with Power Switch will indicate the charging status as follows: System Mode During Charging Charging Complete Standby Blinks in green at a slow rate. Blinks in white at a slow rate. Power on but in idle mode Blinks in green. Blinks in white. Bluetooth mode or AUX IN mode Remains on in green. Remains on in white. Notes: The battery cannot be replaced by the user.
System Overview Left View 1. LED indicator 6 - Indicates the built-in battery charging status. - When powering on, indicates the pairing state. 1 2 3 4 5 2. Power switch Slide to turn on/off the system. 3. (Pair) button Press to put the system into pairing mode. 4. USB power port Right View Connect the supplied USB power cable. 5. AUX IN jack Input audio signals from an external device. 7 8 6. Microphone 9 Use to speak during a call. 10 7. VOL + button Press to increase the volume level. 8.
Basic Operation Activating the Power Saving Mode Turning on/off the System Slide up the Power switch to turn on the System. Left Side Right Side Power switch Press and hold the (Pair) button and the ► button together to disable or enable the Power Saving mode: The LED indicator blinks twice to indicate Power Saving mode is off. The system will keep on all the time even it is in idle mode. The LED indicator blinks once to indicate the Power Saving mode is activated.
Selecting the Sound Source This system enables you to access two sound sources – AUX IN and Bluetooth. If AUX IN jack has been inserted, the sound source will switch to AUX IN mode automatically. Remove the audio cable from the AUX IN jack, the sound source will switch to Bluetooth mode automatically. When a Bluetooth connection has been established and the system is in Bluetooth mode, once you insert audio cable, the system will suspend the Bluetooth playback and switch to AUX IN mode.
Playing back via Bluetooth Establishing a Bluetooth Connection Notes: If your mobile phone supports A2DP, AVRCP profiles, its music will play through the system. You can make a Bluetooth connection with a mobile phone, an iPhone/iPad/iPod touch or any other Bluetooth-enabled devices. 5. Select the desired music and press Play button on your device. The system automatically starts playing back the music. 1. Slide up the Power switch to turn on the System.
Playing back from Macbook or Macbook Pro 6. Double click the Pocket Kick icon and the device connection screen will be shown. 1. In the desktop screen, select the Open Bluetooth Preference. 7. Click the Connect button in the Music and Audio option. 2. If there are any old Pocket Kick records, remove them. Click the Continue button to continue pairing process. 8. Once connected, the LED indicator on the system will be solid on in white and the connection success screen will be shown. 3.
Playing back from External Source You can enjoy the sound from an optional component such as a digital music player through the speakers of this system. Be sure to turn off the power of each component before making any connections. For details, refer to the instruction manual of the component to be connected. Connect an external device to the AUX IN jack on the back panel of the system using a stereo audio cable (supplied). AUX IN jack To audio output such as CD/MD/digital music player, etc.
Using Hands-free Calling You can enjoy hands-free calling via Bluetooth connection with a Bluetooth mobile phone that has a music function and supports the Bluetooth profile A2DP, and HFP or HSP. If your Bluetooth mobile phone supports both HFP and HSP, set to HFP. 1. Slide up the Power switch to turn on the System. 2. Establish the Bluetooth connection between the system and your mobile phone.
Troubleshooting Check this list for a possible troubleshooting solution before calling for service. In These Cases Check the Following Points Power does not come on When using the battery pack, the battery power is too low. Charge the battery. No sound output Check if the volume level of the system is set to the minimum.
Technical Specifications Model SFQ-10 Type Pocket Kick Support Bluetooth Bluetooth 1.2, 2.0, 2.1 and 4.0 compliant Support Profile A2DP, AVRCP, HFP, HSP Input Sensitivity AUX Input Input Terminal Micro USB power port, AUX IN 700mV Power Source DC 5V (External USB IN) Dimensions (Approx.) 150mm (L) x 30mm (D) x 65mm (H) Weight 266g Design and specifications are subject to change without notice.
Save this manual