Sound Platform 2 SFQ-06
Safety Information 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
18. Do not place any naked flame sources, such as lighted candles, on the apparatus. 19. The battery used in this product must be properly recycled or disposed of. Please contact your local recycling center for proper battery handling and disposal instructions. FCC and IC Information: This device complies with Part 15 of the FCC Rules and RSS-210 of the IC Rules.
Information for Users on Disposal of Old Equipment CAUTION - Proper Installation Install the system in a place which is level, dry and neither too hot nor too cold. The appropriate temperature is between 5 oC and 35 oC. Install the system in a location with adequate ventilation to prevent internal heat from building up inside the unit. Leave sufficient distance between the system and TV. Keep the system away from TV to avoid interference with TV.
Contents Getting Started ............................................................................................................... 5 Package Contents .............................................................................................................................................................. 5 Connecting the AC Adaptor .......................................................................................................................................... 5 System Overview ...........
Getting Started Package Contents Examine whether the following package contents are all included: Main Unit AC Adaptor FM Antenna Connecting the AC Adaptor Connect one end of the AC adaptor to the DC IN jack of the unit and the other end to a power outlet. WARNING! For optimal performance, use only the supplied AC adaptor. • Ensure that power supply outlet matches with the unit AC's input 100-240V~, 50/60Hz before connection. Power outlet .5.
System Overview 1. SOURCE button Top View Toggle among Bluetooth, AUX IN and FM tuner modes. 2. Volume +/- buttons Press to increase/descrease the volume level. 3. TONE button Toggle among Bright, Warm and Flat modes. 4. 1 2 3 4 5 6 7 8 9 button Press to activate the UQ3 sound effect. Press again to deactivate. 10 Hold separatively this button on the two units at the same time to create a wirless connection between them. You need to buy another one for the better sound effect. 5.
Back View 13. USB CHARGING jack Charge your external devices. 14.POWER SAVE OFF/ON swtich Press to activate the power save mode. 15.LIGHT BAR OFF/ON button 16.FM jack 17.DC IN jack 18.AUX IN jack 14 15 16 13 For transmitting an audio input signals from an external device. 19. Cable Door 19 18 17 Display Window 1. L/R indicator Appears when two units are connected wirelessly in the Bluetooth mode. 6 7 2. Speaker indicator 5 4 Appears during the volume level is adjusted. 3.
Basic Operation Turning on/off the System Sound Mode Tap the button on the top to turn on the System . Sound modes can be selected to enhance the type of music being played. Tap the TONE to select the sound mode. On/Standby button Each time you tap the button, the sound mode changes as follows: “BRIGHT” “WARM” Cancel sound mode Activating the Power Save Mode Light bar Tap the button again to turn off the System.
Bluetooth Downloading the Soundfreaq App Soundfreaq Establishing a Bluetooth Connection Notes: • If your mobile phone supports A2DP protocol, its music will play through the unit. • You can make a Bluetooth connection with an iPhone/iPad/iPod touch or any other Bluetooth-enabled devices with iOS.
• The indicator and light bar start blinking quickly to indicate that the unit and your device have entered into the connection mode. • After a Bluetooth connection is established successfully, the indicator and the light bar will be solid on. 6. Select the desired music and press "Play" button on your device to play back the music. • If the indicator and light bar remain on after blinking for 3 minutes, the pair was unsuccessful. Try again above steps 3 to 5.
FM Press the Button Functions Unit • Switch between the frequency display and preset display. Tune the desired frequency or channel number based on the different display. Frequency display Preset display • Hold this button to enter saving mode. Press to save a channel. (see "Presetting a station”) • Select a channel (from 01 to 20). Change frequency from 87.5MHz to 108.0MHz in the FM mode. • Hold for more than one second to activate the Auto Scan function, and then release the button.
Presetting a Station 1. Select FM tuner mode with the SOURCE button. 2. Switch to the frequency display if the display is channel number. 3. Tune a desired frequency. You can use either of the below methods to tune the frequency. 4. Hold the button to start storing a station. • The channel number starts blinking. A. Manual Tuning - Briefly tap the / button repeatedly to move frequency to frequency (from 87.5 MHz to 108.0 MHz) until you find the desired station. 5.
True-Wireless Connection Two systems can be connected wirelessly and they can be served as left and right speakers respectively during playback. You need to purchase one more system according to your need for experience. 1. Turn on the two systems by pressing the button. 2. Hold the button on the one of the two systems firstly, and at the same time hold the button on the another system in the Bluetooth mode. The two light bars will blink. If the connection is sucessfull, the two light bars will remain on.
Optimizing Sound Quality TM "U-Cubed" is an proprietary technology designed to create an ultra wide stereo sound field in digital music systems. With exceptional natural sound reproduction of high definition and fidelity, we create a listening experience where you feel like your speakers are separated much more than they are. To activate UQ3 on: The unit, press the button to activate, press again to deactivate. On the Remote App, press the button to activate and deactivate.
Troubleshooting Check this list for a possible troubleshooting solution before calling for service. In These Cases Check the following points Power does not come on. • AC adaptor is not inserted securely. Plug in securely. Hard to listen to broadcasts because of noise. • The antenna is not properly extended or positioned. • Tune to the correct radio channel/frequency. • Making sure the antenna is further away from any equipment that may be causing the noise or interference.
Technical Specifications SFQ-06 Model Name Sound Platform 2 Support Bluetooth Bluetooth 1.2, 2.0 and 2.1 compliant Support Profile A2DP Input Sensitivity AUX Input 1200mV Band Tuner FM Tuning Range 87.5 ~ 108.0MHz Frequency Step 100kHz Preset Stations 20 Input Terminal External DC IN (for AC adaptor), AUX IN Power Source DC 18V AC Adaptor 3.3A (External DC IN) Input: AC 100-240V, 50/60Hz Output: DC 18V 3.3A Dimensions (Approx.) 329mm(W) * 176.5mm(H) * 125mm(D) Weight 1.
Size: 160 * 120 mm 2 Nov 2012 Consignes de sécurité ATTENTION NE PAS OUVRIR - RISQUE D'ÉLECTROCUTION Le symbole de l'éclair dans un triangle est destiné à mettre en garde l'utilisateur contre la présence de tensions dangereuses à l'intérieur du boîtier du produit, d'une puissance suffisante pour constituer un risque de choc électrique.
Save this manual