Sound Stack SFQ-03
Safety Information 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
18. Do not place any naked flame sources, such as lighted candles, on the apparatus. 19. The battery used in this product must be properly recycled or disposed of. Please contact your local recycling center for proper battery handling and disposal instructions. Warnings: The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and users can obtain Canadian information on RF exposure and compliance from the Canadian Representative Burnport Holdings Ltd.
Information for Users on Disposal of Old Equipment CAUTION - Proper Installation Install the system in a place which is level, dry and neither too hot nor too cold. The appropriate temperature is between 5 oC and 35 oC. Install the system in a location with adequate ventilation to prevent internal heat from building up inside the unit. Leave sufficient distance between the system and TV. Keep the system away from TV to avoid interference with TV.
Contents Getting Started 5 Package Contents 5 Installing/Replacing the Batteries 5 Connecting the AC Adapter 6 Using the Remote Control 7 System Overview 8 Front View Back View Remote Control 8 8 9 Selecting the Sound Source 9 Playing back from iPad/iPhone/iPod 10 Setting an iPod on the Unit 10 Listening to an iPod Charging an iPod 10 Playing back via Bluetooth 12 Downloading the SoundFreaq App 12 Using Multiple Bluetooth Devices 13 Playing back from Macbook or Macbook Pro 13 P
Getting Started Package Contents Examine whether the following package contents are all included: DOCK PAIR OPTICAL AUX VOLUME Main Unit Remote Control Switch Mode Power Supply FM Antenna + CR2025 3V Lithium Coin Battery CR2025 Adapter Cable It is loaded on the remote control at the factory. Installing/Replacing the Batteries CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Connecting the AC Adapter 1. Insert the Switch Mode Power Supply into 20V/4.47A DC IN jack of the unit. 2. Insert one end of the Adapter Cable into the end of the Switch Mode Power Supply and the other end into an electrical outlet only after all other connections are completed. WARNING! For optimal performance, use only the supplied AC adapter. Ensure that power supply outlet matches with the unit AC's input 100-240V~, 50/60Hz before connection.
Using the Remote Control Using the remote control Storing the remote control Remove the insulation sheet before using for the first time. Aim the remote control at the IR sensor on the front lens within an approximate distance of 7m (23 feet) away. A remote control storage location is designed on the back of the unit. The remote control can be magnetized into the storage location easily for your quick and convenient use.
System Overview Front View Back View 5 11 OPT 6 7 4 8 VOL 1 2 3 9 12 10 13 14 15 16 9. U-Cubed button Press to activate or deactivate the U-Cubed (High Definition Wide Stereo) sound effect. 10. Vol +/- button Press to increase (+) or decrease (-) the volume level. 11. Remote control storage location 12. DC IN jack 13. USB jack Charge an external device via the jack. It is used for charging purposes only.
Remote Control 1. (On/Standby) button Switch between standby mode and power-on mode. 2. DOCK button Switch to iPod mode. 3. Bluetooth button Switch to Bluetooth mode. 4. PAIR button Build a Bluetooth connection with a Bluetooth-enabled device. 5. OPTICAL button Switch to optical mode. 6. AUX button Switch to AUX mode. 7. (Previous) / (Next) button Skip to the previous/next track in iPod and Bluetooth modes. 8. (Play/Pause) button Play/pause a track when listening to a track. 9.
Playing back from iPad/iPhone/iPod Note： In this user manual, “iPod” is used as a general reference to functions on an iPod, iPhone or iPad, unless otherwise specified by the text or illustrations.
Charging an iPod Notes for Caring Your iPod: The battery of the iPod is always charged through the unit when it is connecting to a wall outlet. Charging begins when the iPod is set on the dock. The charging status appears in the display on iPod. Make sure the AC adapter is connected to the unit. The iPod is charged regardless of the sound source selected on the unit. See the iPod instruction manual about the details of iPod charging. .11.
Playing back via Bluetooth Downloading the SoundFreaq App Notes: If your mobile phone supports A2DP protocol, its music will play through the unit. You can build a Bluetooth connection with a mobile phone, an iPhone/iPad/iPod touch or any other Bluetooth-enabled devices. We have developed an App to give you full control from your iPhone/iPad/iPod touch while playing audio over the Bluetooth wireless connection, please download the "SoundFreaq Remote" App for FREE. 1.
The pair indicator starts blinking quickly to indicate that the unit and your device have put into the connection mode. When a Bluetooth connection is established successfully, the indicator will be solid on. 5. Select Bluetooth mode by repeatedly pressing the SOURCE button on the unit or pressing the Bluetooth button on remote control. 6. Select the desired music and press "Play" button on your device. The unit automatically starts playing the audio.
Listening to Tuner The FM radio function can be accessed by: 1) the remote App, when Bluetooth connection has been built; 2) the remote App, when the iPad/iPhone/iPod touch is set on the unit. The operation interface of remote App software is similar to the remote control. You can easily operate the tuner function on the display of iPad/iPhone/iPod touch. Press the Button Functions Remote App Switch between the frequency display and channel number display. Hold this button to enter saving mode.
Playing back from Optional Components Listening to an External Audio Device You can enjoy the sound from an optional component such as a portable digital music player through the speakers of this unit. Be sure to turn off the power of each component before making any connections. For details, refer to the instruction manual of the component to be connected. Connect an external device to the AUX IN jack on the back panel of the unit using a stereo mini plug cord (not supplied). 1. Turn the unit power on. 2.
Activating "U-Cubed" Sound Effect "U-Cubed" is an proprietary technology designed to create an ultra wide stereo sound field in digital music systems. With exceptional natural sound reproduction of high definition and fidelity, we create a listening experience where you feel like your speakers are separated much more than they are. To activate UQ3 on: The unit, press the " " button to activate, press again to deactivate.
Troubleshooting Check this list for a possible troubleshooting solution before calling for service. In These Cases Check the following points Power does not come on. • AC adapter is not inserted securely. Plug in securely. Cannot set the iPad/iPhone/iPod. • Is the selected dock adapter compatible to your iPad/iPhone/iPod? • Is the dock adapter properly mounted on the unit? Make sure to mount the dock adapter properly. Cannot operate iPad/iPhone/iPod.
Technical Specifications SFQ-03 Model Type Sound Stack Support Bluetooth Bluetooth 1.2, 2.0 and 2.1 compliant Support Profile A2DP Input Sensitivity/Impedance AUX Input 1200 mV Band Tuner FM Tuning Range 87.5 ~ 108.0 MHz Frequency Step 100 KHz Preset Stations 20 Input Terminal External DC IN (for AC adapter), AUX IN Power Source DC 20 V AC Adapter 4.47 A (External DC IN) Input: AC 100-240V, 50/60Hz Output: DC 20 V 4.47 A Dimensions (Approx.
Save this manual
10 Jun 2011 Informations de sécurité ATTENTION NE PAS OUVRIR - RISQUE D'ÉLECTROCUTION Le symbole de l'éclair dans un triangle est destiné à mettre en garde l'utilisateur contre la présence de tensions dangereuses à l'intérieur du boîtier du produit, d'une puissance suffisante pour constituer un risque de choc électrique.
10 Jun 2011 Safety Infor mation The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
