Sound Step SFQ-02RB
16 Mar 2011 Safety Infor mation The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
24 Mar 2011 Informations de sécurité ATTENTION NE PAS OUVRIR - RISQUE D'ÉLECTROCUTION Le symbole de l'éclair dans un triangle est destiné à mettre en garde l'utilisateur contre la présence de tensions dangereuses à l'intérieur du boîtier du produit, d'une puissance suffisante pour constituer un risque de choc électrique.
Information for Users on Disposal of Old Equipment CAUTION - Proper Installation Install the system in a place which is level, dry and neither too hot nor too cold. The appropriate temperature is between 5 oC and 35 oC. Install the system in a location with adequate ventilation to prevent internal heat from building up inside the unit. Leave sufficient distance between the system and TV. Keep the system away from TV to avoid interference with TV.
Contents Getting Started 5 Package Contents 5 Installing/Replacing the Batteries 5 Connecting the AC Adapter 6 Charging the Built-in Battery 7 Using the Remote Control 7 System Overview 8 Front View Back View 8 Bottom View Remote Control 8 9 Selecting the Sound Source 9 Playing back from iPad/iPhone/iPod 10 Setting an iPod on the Unit 10 Listening to an iPod 10 Viewing a Video/Picture from an iPod Charging an iPod 10 Playing back via Bluetooth 12 Downloading the SoundFreaq App
Getting Started Package Contents Examine whether the following package contents are all included: + CR2025 3V Lithium Coin Battery CR2025 Main Unit Remote Control It is loaded on the remote control at the factory. AC Adapter FM Antenna Installing/Replacing the Batteries Handling the Remote Control CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 1. Squeeze and pull to release the battery cover latch.
Warning - When Using the Battery Store the battery in a place where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately. Do not recharge, short circuit, disassemble, heat the battery, or dispose the battery in fire. Doing any of these things may cause the battery to give off heat, crack, or start a fire. Do not leave the battery with other metallic materials. Doing this may cause the battery to give off heat, crack, or start a fire.
Charging the Built-in Battery Using the Remote Control The Sound Step has a built in Lithium Ion battery to give you portable power when not using the AC adaptor. When the adaptor is plugged in, the unit will charge. During charging the LED indicator next to the DC IN jack will be solid red when fully charged, it will be turn green. When operating the unit in battery mode, a flashing red indicator means the battery is low.
System Overview Front View Back View 5 6 7 8 15 12 1 2 3 13 14 16 17 18 4 9 10 11 10. Vol +/- button Press to increase (+) or decrease (-) the volume level. 11. (on/Standby) buttom Switch between standby and power-on modes. 12. USB jack Connect to an external device for charging. 13. Charging indicator Indicate the charging status of the built-in battery. 14. DC IN jack Connect the supplied AC adapter. 15. Subwoofer speaker 16. FM.ANT (Antenna) jack 17.
Remote Control 1. 1 2 3 4 5 2. 6 3. 7 4. 5. 6. 7. (Power off ) button Switch power-on mode to power-off mode. Note: The button can not power on the unit. (Previous) / (Next) button Skip to the previous/next track in iPod and Blutooth modes. Decrease/increase the frequency to a station in tuner mode. (Play/Pause) button Play/pause a track when listening to a track. Save a station in tuner mode. SOURCE button Select iPod, Tuner, AUX or Bluetooth mode by pressing repeatedly.
Playing back from iPad/iPhone/iPod Note: In this user manual, “iPod” is used as a general reference to functions on an iPod, iPhone or iPad, unless otherwise specified by the text or illustrations.
1. Press the " " button to power on the system. 2. Set an iPod on the unit and press the DOCK button to switch to the iPod mode if the unit is not in the iPod mode. Note: Before viewing a video/picture from your iPod on your TV, tap the corresponding application icon on the iPod to select a picture/video. 3. Press the “ ” button to play the desired track. Charging an iPod The battery of the iPod is always charged through the unit when it is connectinig to a wall outlet.
Playing back via Bluetooth Downloading the SoundFreaq App We have developed an App to give you full control from your iPhone/iPad while playing audio over the Bluetooth wireless connection, please download the "SoundFreaq Remote" App for FREE. After you build a Bluetooth connection between your iPhone/iPad and the Sound Step, a prompt will be displayed on your iPhone/iPad asking you if you would like to install our App, click "Yes" to install the APP.
The pair indicator starts blinking quickly to indicate that the unit and your device have put into the connection mode. When a Bluetooth connection is established successfully, the indicator blinks slowly. 5. Select Bluetooth mode by repeatedly pressing the SOURCE button on the remote control or pressing the Bluetooth button on the unit. 6. Select the desired music and press "Play" button on your device. The unit automatically starts playing the audio.
Listening to Tuner The FM radio function can be accessed by: 1) the remote control; 2) the remote App, when Bluetooth connection has been built; 3) the remote App, when the iPad/iPhone is set on the unit. The operation interface of remote App software is similar to the remote control. You can easily operate the tuner function on the display of iPad/iPhone. Press the Button Functions Remote Control / Remote App FM Antenna Switch between the frequency display and channel number display.
B. Auto Scanning - Hold " "/ " " button until the frequency display starts flashing. The frequency will be scanned automatically until a station is found. 4. Hold " " button to start storing a station. The channel number and “Select” word start blinking together on the display of the iPad/iPhone. 5. Use " "/ " " to select the channel number (from 01 to 20) to be set. 6. Press " " button again to store the frequency. The selected frequency will then be stored with the preset channel number.
Troubleshooting Check this list for a possible troubleshooting solution before calling for service. In These Cases Power does not come on. Check the following points • AC adapter is not inserted securely. Plug in securely. • The built-in lithium battery is no power. Charge the battery. Cannot set the iPad/iPhone/iPod. Cannot operate iPad/iPhone/iPod. iPad/iPhone/iPod cannot be charged.
Technical Specifications SFQ-02RB Model Type Sound Step Support Bluetooth Bluetooth 1.2, 2.0 and 2.1 compliant Support Profile A2DP Input Sensitivity/Impedance AUX Input 1200 mV Band Tuner FM Tuning Range 87.5 ~ 108.0 MHz Frequency Step 100 KHz Preset Stations 20 Input Terminal External DC IN (for AC adapter), AUX IN Power Source DC 12 V AC Adapter 2.5 A (External DC IN) Input: AC 100-240V, 50/60Hz Output: DC 12 V 2.5 A Dimensions (Approx.
Save this manual