User's Manual

ManualsBrandsBeats Electronics ManualsElectronicsPortable Stereo Sound System

BeatsPill Active Ingredients: (Portable Stereo Bluetooth Speaker)

8.5HR

EN 1. POWER ON/OFF

To Turn on BeatsPill, firmly press and release the power

button, the Beats logo will light and after a brief startup

period, an audio cue will indicate the system is on.  To

turn Beatspill off, firmly press and release the power

button. The Beats logo will fade out and an audio cue

will indicate power off.

2. CONNECTED

To pair Beatspill with a compatible bluetooth device for

A2DP (stereo audio) and/or HFP (phone calls), press

and hold the rear power button for a full 5 sec. The rear

BT LED will blink WHITE rapidly, indicating that

Beatspill is in pairing mode and is discoverable by a

source device. Pairing mode can be cancelled by

pressing the power button. Beatspill will remain in

pairing mode for approx. 3 minutes. If no pair is

achieved, it will enter an unconnected state and pairing

mode must be reinitiated.

Connected

When Beatspill is successfully paired and connected

to a Bluetooth device, the rear BT LED will be solid

WHITE. When Beatspill is not connected to any BT

device, the rear BT LED will be unlit.  Beatspill can

remember up to eight paired devices in its memory and

will automatically try to connect with the most recently

connected device , however, HFP (telephone) devices

will take priority over stereo audio devices when

Beatspill searches for an auto connection.

Stealing

If Beatspill is paired to two or more compatible devices

and automatically connects to a non-preferred device,

you can “steal” the connection with your preferred

device by selecting “beatspill” in your devices BT list

IMPORTANT SAFETY INFORMATION

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

8. DO NOT install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. PROTECT the power cord from being walked on or

pinched, particularly at the plugs and the point where it

exits from the apparatus.

10. ONLY USE attachments/accessories specified by the

manufacturer.

11. UNPLUG this apparatus during lightning storms or

when unused for long periods of time.

12. DO NOT expose this apparatus to dripping or

splashing and ensure that no objects filled with liquids,

such as vases, are placed on the apparatus.

13. To completely disconnect this apparatus from the AC

mains, disconnect the power supply cord plug from the

AC receptacle.

14. The mains plug of the power supply cord shall remain

readily operable.

and initiating a connection.

3. AUX INPUT

To play audio using the supplied 3.5mm cable, simply

plug the cable into the music source device into the

“audio in” jack on the Beatspill.

4. AUDIO OUT

The audio output of the Beatspill can be used to

connect to the line in of an alternate audio system, such

as a home theater, or BeatsbyDre Beatbox. This allows

the pill to act as a Bluetooth receiver for audio playback

devices that do not have Bluetooth capability.  When

audio out jack is used, the Beatspill internal speakers

will be disabled and the volume controls are also

inactive. When a phone call is received while also using

the audio out, audio out will be temporarily disabled and

phone call functionality will be enabled on the Beatspill.

5. VOLUME

When using BT or Aux in as the audio source, the

Beatspill volume can be adjusted with the volume up

and down buttons on the front top surface of the

Beatspill. To quickly adjust the volume, press and hold

the up or down volume button. *Volume buttons are

disabled when Audio out is used.

6. BLUETOOTH CONTROLS

Audio play and pause

When listening to stereo audio wirelessly thru a

connected bluetooth device (A2DP) music can be

paused and un-paused by pressing the front B logo

multifunction button (MFB).

Phone Calls

Beatspill can be used to make and receive phone calls

when connected to a HFP1.6 Bluetooth compatible

handset.  Audio playback will be paused when a

phone call is in progress.  To answer a call when

connected to a BT compatible handset, press the front

MFB. This will accept an incoming call.  To Reject an

incoming call, press and hold the MFB.  To Hang up a

call in progress, press the front MFB.  To answer an

incoming call when already on a call in progress: press

the front MFB. This will answer the incoming call and

put the current call on hold.  To Reject an incoming

call when already on a call in progress: press and hold

the MFB. This will reject the incoming call and current

call will remain active.  To switch between an active

call and a call on hold: press the front MFB. Pressing

again will switch back to the previous call.  To Switch

the audio output back to the handset instead of

Beatspill: press the MFB twice quickly when on an

active call.

7. CHARGING AND BATTERY

To charge the Beatspill, plug the USB cable into the

rear USB port and into a USB compatible power

supply/ source. Charging will be indicated by a solid

RED ring around the USB port. When full charge is

reached, the ring around the USB port will change to

solid GREEN.  Battery life should be approximately

8.5 hrs at moderate listening levels. When Beatspill

detects that it has 20% battery life remaining and USB

cable is unplugged, USB port will blink, indicating that

power source should be connected.

8. TECHNICAL SPECIFICATIONS

Weight: 325g

Battery Life: 8.5 hours (average at 80dB)

Power Adapter Output Rating: 5Vdc, 2.1A

Power Adapter Input Rating: 100-240V ~ 50/60Hz, 0.5A

BeatsPill Active Ingredients: (Portable Stereo Bluetooth Speaker)

8.5HR

EN 1. POWER ON/OFF

To Turn on BeatsPill, firmly press and release the power

button, the Beats logo will light and after a brief startup

period, an audio cue will indicate the system is on.  To

turn Beatspill off, firmly press and release the power

button. The Beats logo will fade out and an audio cue

will indicate power off.

2. CONNECTED

To pair Beatspill with a compatible bluetooth device for

A2DP (stereo audio) and/or HFP (phone calls), press

and hold the rear power button for a full 5 sec. The rear

BT LED will blink WHITE rapidly, indicating that

Beatspill is in pairing mode and is discoverable by a

source device. Pairing mode can be cancelled by

pressing the power button. Beatspill will remain in

pairing mode for approx. 3 minutes. If no pair is

achieved, it will enter an unconnected state and pairing

mode must be reinitiated.

Connected

When Beatspill is successfully paired and connected

to a Bluetooth device, the rear BT LED will be solid

WHITE. When Beatspill is not connected to any BT

device, the rear BT LED will be unlit.  Beatspill can

remember up to eight paired devices in its memory and

will automatically try to connect with the most recently

connected device , however, HFP (telephone) devices

will take priority over stereo audio devices when

Beatspill searches for an auto connection.

Stealing

If Beatspill is paired to two or more compatible devices

and automatically connects to a non-preferred device,

you can “steal” the connection with your preferred

device by selecting “beatspill” in your devices BT list

FCC STATEMENT

FCC-ID: COW81000057

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to

radio communications. However, there is no guarantee

that interference will not occur in a particular

installation. If this equipment does cause harmful

interference to radio or television reception, which can

be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by

one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and

receiver.

 Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

 Consult the dealer or an experienced radio/TV

technician for help.

FCC RADIATION EXPOSURE STATEMENT

This equipment complies with FCC RF radiation

exposure limits set forth for an uncontrolled

environment. This transmitter must not be co-located or

operating in conjunction with any other antenna or

transmitter. This equipment should be installed and

operated with a minimum distance of 20 centimeters

between the radiator and your body.

This equipment complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired

operation.

CAUTION

The manufacturer is not responsible for any radio or TV

interference caused by unauthorized modifications to

this equipment. Such modifications could void the user

authority to operate the equipment.

CANADA STATEMENT

This device complies with Industry Canada RSS-210.

Operation is subject to the following two conditions: (1)

this device may not cause interference, and (2) this

device must accept any interference, including

interference that may cause undesired operation of the

device. The device meets the exemption from the

routine evaluation limits in section 2.5 of RSS 102 and

compliance with RSS-102 RF exposure, users can

obtain Canadian information on RF exposure and

compliance.

IMPORTANT SAFETY INFORMATION

The exclamation point, within an

equilateral triangle, is intended to alert

the user to the presence of important

operating and maintenance (servicing)

instructions in the literature accompanying the product.

The lightning flash with arrowhead

symbol within an equilateral triangle is

intended to alert the user to the

presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electrical

shock.

WARNING: To reduce the risk of fire or electrical shock,

do not expose this apparatus to rain or moisture.

WARNING: No naked flame sources – such as candles

– should be placed on the product.

WARNING: Batteries (battery pack or batteries

installed shall not be exposed to excessive heat such as

sunshine, fire or the like.

Place the equipment near a main power supply outlet

and make sure that you can easily access the power

breaker switch.

CAUTION: Danger of explosion if battery is incorrectly

replaced. Replace only with the same or equivalent

type.

and initiating a connection.

3. AUX INPUT

To play audio using the supplied 3.5mm cable, simply

plug the cable into the music source device into the

“audio in” jack on the Beatspill.

4. AUDIO OUT

The audio output of the Beatspill can be used to

connect to the line in of an alternate audio system, such

as a home theater, or BeatsbyDre Beatbox. This allows

the pill to act as a Bluetooth receiver for audio playback

devices that do not have Bluetooth capability.  When

audio out jack is used, the Beatspill internal speakers

will be disabled and the volume controls are also

inactive. When a phone call is received while also using

the audio out, audio out will be temporarily disabled and

phone call functionality will be enabled on the Beatspill.

5. VOLUME

When using BT or Aux in as the audio source, the

Beatspill volume can be adjusted with the volume up

and down buttons on the front top surface of the

Beatspill. To quickly adjust the volume, press and hold

the up or down volume button. *Volume buttons are

disabled when Audio out is used.

6. BLUETOOTH CONTROLS

Audio play and pause

When listening to stereo audio wirelessly thru a

connected bluetooth device (A2DP) music can be

paused and un-paused by pressing the front B logo

multifunction button (MFB).

Phone Calls

Beatspill can be used to make and receive phone calls

when connected to a HFP1.6 Bluetooth compatible

handset.  Audio playback will be paused when a

phone call is in progress.  To answer a call when

connected to a BT compatible handset, press the front

MFB. This will accept an incoming call.  To Reject an

incoming call, press and hold the MFB.  To Hang up a

call in progress, press the front MFB.  To answer an

incoming call when already on a call in progress: press

the front MFB. This will answer the incoming call and

put the current call on hold.  To Reject an incoming

call when already on a call in progress: press and hold

the MFB. This will reject the incoming call and current

call will remain active.  To switch between an active

call and a call on hold: press the front MFB. Pressing

again will switch back to the previous call.  To Switch

the audio output back to the handset instead of

Beatspill: press the MFB twice quickly when on an

active call.

7. CHARGING AND BATTERY

To charge the Beatspill, plug the USB cable into the

rear USB port and into a USB compatible power

supply/ source. Charging will be indicated by a solid

RED ring around the USB port. When full charge is

reached, the ring around the USB port will change to

solid GREEN.  Battery life should be approximately

8.5 hrs at moderate listening levels. When Beatspill

detects that it has 20% battery life remaining and USB

cable is unplugged, USB port will blink, indicating that

power source should be connected.

8. TECHNICAL SPECIFICATIONS

Weight: 325g

Battery Life: 8.5 hours (average at 80dB)

Power Adapter Input Rating: 100-240V ~ 50/60Hz, 0.5A

Cut

Fold

Fold Fold

Fold

BEATSPILL USER GUIDE - xx

196

[7.716]

49.4

[1.945]

27.5

[1.082]

526.5

[20.73]

172.5

[6.791]

49.4

[1.945]

49.4

[1.945]

49.4

[1.945]

154

[6.063]

172.5

[6.791]

FRONT

LANGUAGE PANEL 1

ILLUSTRATED INSTRUCTIONS

FRONT

LANGUAGE PANEL 2

Black

FILE NAME:

DIELINE:

PROJECT:

MANAGER:

DESIGNER:

VIEW:

DESIGNER:

AMENDED BY:

REVISION:

ARTWORK INFO:

DIELINE INFO:

REVISION:

1500 Sansome Street, Roundhouse One, San Francisco, CA 94111 | 415.632.1170 | www.ammunitiongroup.com

CLIENT: JOB NO: DATE:

FINISHES:

INKS USED:

CUT

CREASE

BLEED

07/12/2012Beats LLC

Pill_UserGuide_071212.ai

BeatsPill User Guide

Hamish Thain

Katie King Rumford Katie King Rumford

Front Hamish Thain

xxxx

CLIENT REF:

N/A

:05

Power Adapter Output Rating: 5Vdc, 2.1A