User Manual

4/5/2017 SetupanduseyourSolo3WirelessHeadphones
https://www.beatsbydre.com/support/howto/setupandusesolo3wirel ess 1/7

Turn on
Press and hold the power button for about a second to turn your headphones on or off.

Set up
If you have an iPhone using iOS 10, follow these steps. When you set up your headphones in this
way, they set up automatically with your other devices that are signed in to iCloud and using iOS
10, macOS Sierra, or watchOS 3.
1. Hold your headphones next to your unlocked iPhone.
2. Press the power button on your headphones for 1 second.
3. After a few seconds, your iPhone asks you to connect. If it doesn't, press the power button on
your headphones for 5 seconds.
4. Follow the instructions on your iPhone.
If you have some other Bluetooth device, follow these steps to pair your headphones with that
device:
1. Press the power button for 5 seconds. When the Fuel Gauge flashes, your headphones are
discoverable.
2. Go to Bluetooth settings on your device.
3. Select your headphones from the list of discovered Bluetooth devices.

Connect to a different device
Your headphones automatically reconnect to the last device you used with them. To connect to a
different device, follow these steps.
iPhone, iPad, or iPod touch using iOS 10:
1. Open Control Center by swiping up from the bottom edge of the screen.
Set up and use your Solo Wireless headphones
Here's everything you need to know to make the most of your Solo Wireless headphones.
3
3