S3 Instruction manual
Strap installation diagram 1. Pull out the strap and level it. As shown 2. Press the button to align the hole on one side, then align the hole above the hole and release the pin buckle. The other operation is the same. 3.
Bracelet client download Android 5.0+ and iOS10.0 and above devices that support Bluetooth 4.0 Scan the QR code below to download and install the bracelet client.
Connecting bracelet Open the mobile client to set up personal information Switch to the [Device] page and click [Binding Device] Click on your device in the list of scanned devices Binding completed Long press on more pages to enter the relevant, long press on the will display the watch MAC address, you can determine your device through the MAC address in the device list; After the bracelet is successfully bound, each time the client is opened, the bracelet will automatically connect with the mobile phon
Introduction to the bracelet function Dial: long press the bracelet touch screen switch Motion information The bracelet records and displays the number of steps you take each day, the amount of calories burned, and mileage information. More detailed analysis and data logging can be viewed in the client. Sleep The bracelet can record and display the total length of your sleep yesterday and the length of deep sleep and light sleep. More detailed analysis and data logging can be viewed in the client.
Train Long press on the exercise interface to start an exercise test record, there are 3 sports modes to choose from. More detailed analysis and data logging can be viewed in the client. Unread The bracelet can receive notification pushes on the display phone, and the push item switch can be set in the client. The bracelet message page can store the latest 9 message records.
Find Click on the search interface to find the location of your phone, more detailed analysis and data logging can be viewed in the client. Camera Clicking on the camera page can directly open the camera of the phone to take photos, which is convenient and quick. Settings Other functions include functions such as brightness adjustment, power off, reset, and return. Bluetooth connection notes: a. Please make sure the Bluetooth of the mobile phone is on, the wristband is turned on. b.
Warranty Card Product number： Repair date： Fault conditions： Tip: The following conditions are not covered by the free warranty 1. Products that are repaired without permission 2. Product barcode, label shift and warranty card alteration, defective 3. Failure to operate the equipment in accordance with the instructions 4. Failure, scratching or damage caused by movement or falling 5. Man-made damage caused by improper customer service, maintenance, and improper use 6.
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
