DMX-016 CHANNEL CONSOLE Ref. nr.: 154.
ENGLISH Congratulations to the purchase of this Beamz controller. Please read this manual thoroughly prior to using the unit in order to benefit fully from all features. Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.
NEDERLANDS Hartelijk dank voor de aanschaf van deze Beamz controller. Neemt U a.u.b. een paar momenten de tijd om deze handleiding zorgvuldig te lezen, aangezien wij graag willen dat u onze producten snel en volledig gebruikt. Lees deze handleiding eerst door alvorens het product te gebruiken. Volg de instructies op anders zou de garantie wel eens kunnen vervallen. Neem ook altijd alle veiligheidsmaatregelen om brand en/of een elektrische schok te voorkomen.
DEUTSCH Vielen Dank für den Kauf dieses Beamz gerat. Nehmen Sie sich einen Augenblick Zeit, um diese Anleitung sorgfältig durchzulesen, damit sie die Möglichkeiten, die unser Produkt bietet, sofort voll ausnutzen können. Lesen Sie erst die Anleitung vollständig vor der ersten Inbetriebnahme durch. Befolgen Sie die Anweisung, da sonst jeglicher Garantieanspruch verfällt. Treffen Sie stets alle Sicherheits-vorkehrungen um Feuer und/oder Stromschlag zu vermeiden.
ESPAÑOL Enhorabuena por la compra de este aparato Beamz. Por favor lea atentamente este manual antes de usar el aparato para disfrutar al completo de sus prestaciones. Seguir las instrucciones le permite no invalidar la garantía. Tome todas las precauciones para evitar que se produzca fuego o una descarga eléctrica. Las reparaciones solo deben llevarse a cabo por técnicos cualificados para evitar descargas eléctricas. Guarde el manual para futuras consultas.
CONTROLS Front 1. 2. 3. 4. Channel indicators Channel fader: Controls the level in assign programm mode or the channels in manual mode Latch button (CH 9 – CH 16): It functions as assign latch or channel latch in manual mode Flash button (CH 1 – CH 16): It functions as assign flash or channel flash in manual mode Shift + flash button: Changes the blind setting in chase mode and when blind enable indicator is lit 5.
17. Add/kill button: Press to select add of kill mode. In kill mode the indicator is lit. In add mode the flash button levels are isolated from other levels. In kill mode and when flash button levels are turned on, the other levels are set to zero. 18a. Programm button: Press this button for more than one second to enter programm mode. When in program mode, the indicator is lit. Now 30 variable patterns (1 – 30) are ready to be programmed, each containing 99 step max.
Rear 1. 2. 3. 4. 5. 6. 7. DC Input Power switch DMX polarity selector DMX output Midi thru: Transmit midi data received on the midi in connector Midi in: Receive midi data Audio line input: For connection with for example a mixer (100Mv to 1Vpp). If it is connected, the built-in microphone is disabled. When not connected the built-in microphone is enabled. Foot control: Can be used to connect a foot controller for remote control 8.
2. Program Press program button for more than one second to enter program mode, the matching indicator is lit. Press pattern ▲ to select desired pattern. Make a setting by menas of fader 1 – 8 and latch button and press program button once to store the setting as a new step. Make a new setting and press program once again. If you have entered all steps press shift + endstep button together to define the last step. Example: 1. Press programm button for more than one second to enter program mode.
6. Latch function The levels of latch buttons are independent from fade time, and when add/kill indicator is lit it doesn’t impact with the levels of the channel faders. 7. Delete pattern In program mode, press shift + delete program to delete present pattern. INITIALIZATION & MEMORY DUMP CAUTION! This operation is harmful to the memory (EEPROM), please be careful not to use it frequently.
CE Declaration of Conformity Importer: Tel : Fax : TRONIOS BV Bedrijvenpark Twente 415 7602 KM - ALMELO 0031546589299 0031546589298 The Netherlands Product number: 154.052 Product Description: DMX-016 Channel Console Regulatory Requirement: EN 61347-1:2008 EN 61347-2-13:2002006 EN 55015:2006+A2:2009 EN 61547:2009 EN 61000-3-2:2006+A2:2009 EN 61000-3-3:2008 The product meets the requirements stated in the above mentioned Standards.