BEACON40® Solo BEACON40® Personal Smart Home Light Systems Setup Guide Lighting Your Way to a Clearer Future V2.
TABLE OF CONTENTS What’s Included ......................................... 3 Setup .................................................................. 4 Recommended Use ............................... 6 Additional Information ......................... 7 Precautions ....................................................
SETUP 1. Remove the BEACON40® Base lamp and the power cord from the packaging. 2. Insert the silver post of the power cord into the port at the bottom of the Base lamp. Connect the power cord to a wall outlet. 3. Press the power button 1 to begin use. If you have BEACON40® Personal light system continue setup: 4. BEACON40® Personal light systems also include a Satellite lamp. Attach the power cord to the Satellite lamp as described.
RECOMMENDED USE ADDITIONAL INFORMATION Find a comfortable setting for your lighting system. For additional information, please visit GetMeBright.com or contact us at: info@getmebright.com. Place each light where it will be unobstructed and in the peripheral view of the users. We recommend placement 3 – 12 feet from your location. Incorporate BEACON40® into your daily habits, with routine use for one or more hours each day.
Instruction for WiFi connection of 40Hz treatment lamp Step 1 Install tuya smart APP on your phone Step 2 When opening the “tuya smart” APP for the first time, register and log in the account according to the APP guidance. Step 3 Power on the product and start it up. Long press the power on button and press 5S to enter the distribution network mode. At this time, the LED will display alternating flashes of warm and cold.
FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.