Installation & Assembly

INSTRUCTION
Please read carefully and save this
instruction, as you
may need them at a later date.
CAUTION
Turn off the main power at the circuit breaker before installing the fixture,
in order to prevent possible shock. If you are unfamiliar with proper
electrical wiring connections, please consult of a qualified electrician
before installing
Installing Step:
Remove the fixture and the mounting package from the box and make sure that no parts
missing in the box.
1. Install bulbs: (Bulbs not including in the package)
(Please don’t exceed the maximum capacity that recommended on the Sockets)
2. Put the Glass Shade (2) and the Metal Ring (3) onto the Canopy (1).
3. The Nipple（4）aim at the hole of the Metal ring (3) through it and use the Screw
Collar (4) thread them tightly.
INSTALLATION IS NOW COMPLETED.
ASSEMBLY INSTRUCTION