User's Manual

ManualsBrandsBEA ManualsElectronicsWireless pushplate for door activation, compatible with BEA 10RD900.

75.5868.01 900 MHZ TOUCHLESS RETROFIT TRANSMITTER 20160412 Page 1 of 4

TOUCHLESS RETROFIT TRANSMITTER

900 MHz transmitter for

touch-to-touchless plate retrot

applications

(US version)

ENGLISH

DESCRIPTION

1. 900 MHz Wireless Transmitter

2. White & Green Activation Wires

3. Red & Black Power Wires

INTRODUCTION

For existing hard-wired touch pushplates, most often, only two (2) wires are

installed, running within the wall from the pushplate to the door control for

activation. The 900 MHz Touchless Retroﬁt Transmitter allows an existing hard-

wired touch pushplate to be retroﬁtted with a new touchless plate that requires four

(4) wires [2 wires for power and 2 wires for activation] without running additional

wires. This is achieved by use of a powered wireless transmitter and wireless

receiver.

Summary of content (4 pages)

PAGE 1
ENGLISH TOUCHLESS RETROFIT TRANSMITTER 900 MHz transmitter for touch-to-touchless plate retrofit applications (US version) DESCRIPTION 2 3 1 1. 900 MHz Wireless Transmitter 2. White & Green Activation Wires 3. Red & Black Power Wires INTRODUCTION For existing hard-wired touch pushplates, most often, only two (2) wires are installed, running within the wall from the pushplate to the door control for activation.
PAGE 2
• • • The device should not be used for purposes other than its intended use. All other uses cannot be guaranteed by the manufacturer of the sensor. The installer of the door system is responsible for carrying out a risk assessment and installing the sensor and the door system in compliance with applicable national and international regulations and standards on door safety. The manufacturer of the sensor cannot be held responsible for incorrect installations or inappropriate adjustments of the sensor.
PAGE 3
SETUP NOTES: 1 1. Refer to 900 MHz wireless receiver User’s Guide 75.5786 for full programming instructions. Learn transmitter and receiver1.
PAGE 4
©BEA|OriginalInstructions|75.5868.01900MHZTOUCHLESSRETROFITTRANSMITTER20160412 PLEASE KEEP FOR FURTHER USE - DESIGNED FOR COLOR PRINTING TECHNICAL SPECIFICATIONS Power: 12-24 V AC/DC +/- 10% Transmitter Frequency: 908-918 MHz (frequency hopping) Emitted radio power: -25 dBm Power consumption: 22 mA Temperature range: 14° F to +131° F (-10° C to +55° C) LEDs: Red (activation) Dimensions: 1.72” (L) x 1.06” (W) x 0.