User's Manual

ManualsBrandsBEA ManualsElectronicsTransmitter operating in the ISM band (902-928 MHz), compatible with BEA 10RD900 Receiver, implementing frequency hopping, intended to be used as wireless door activation pushplates in the pedestrian automatic door industry

75.5172.06 PANTHER SERIES 20160517 Page 1 of 4

PANTHER SERIES

75.5172.06 PANTHER SERIES 20160517 Page 1 of 4

Push plate with integrated 900

MHz wireless transmitter

(US version)

ENGLISH

DESCRIPTION

1. Hex Key

2. Housing Assembly

3. Faceplate

4. Locking Tab

5. Mounting Bracket

6. Battery Enclosure

7. Mounting Keys

8. Mounting Holes

6 INCH ROUND, 900 MHz:

10EMR61-900 - logo & text

10EMR6-900 - text only

10EMR6L-900 - logo only

4.75 INCH ROUND, 900 MHz:

10EMR4751-900 - logo & text

10EMR475-900 - text only

10EMR475L-900 - logo only

4.75 INCH SQUARE, 900 MHz:

10EMS4751-900 - logo & text

10EMS475-900 - text only

10EMS475L-900 - logo only

Summary of content (4 pages)

PAGE 1
ENGLISH PANTHER SERIES Push plate with integrated 900 MHz wireless transmitter (US version) DESCRIPTION 4 1 2 5 3 6 1. 2. 3. 4. 5. 6. 7. 8. Hex Key Housing Assembly Faceplate Locking Tab Mounting Bracket Battery Enclosure Mounting Keys Mounting Holes 6 INCH ROUND, 900 MHz: 10EMR61-900 - logo & text 10EMR6-900 - text only 10EMR6L-900 - logo only 75.5172.06 PANTHER SERIES 20160517 7 8 4.75 INCH ROUND, 900 MHz: 10EMR4751-900 - logo & text 10EMR475-900 - text only 10EMR475L-900 - logo only 4.
PAGE 2
The device should not be used for purposes other than its intended use. All other uses cannot be guaranteed by the manufacturer of the sensor. The installer of the door system is responsible for carrying out a risk assessment and installing the sensor and the door system in compliance with applicable national and international regulations and standards on door safety. The manufacturer of the sensor cannot be held responsible for incorrect installations or inappropriate adjustments of the sensor.
PAGE 3
SETUP To program the 900 MHz wireless receiver (sold separately), please refer to the appropriate User’s Guide: 1 • 900 MHz - 75.5786 900 MHz Panther series must use a 900 MHz receiver. BATTERY REPLACEMENT Remove four (4) screws on Battery Enclosure. 1 • 900 MHz versions - two (2) CR2032 DO NOT OVER TIGHTEN SCREWS DURING REASSEMBLY. THIS MAY CAUSE CONSTANT TRANSMITTER ACTIVATION. TROUBLESHOOTING No activation Constant activation 75.5172.
PAGE 4
PLEASE KEEP FOR FURTHER USE - DESIGNED FOR COLOR PRINTING TECHNICAL SPECIFICATIONS Dimensions 6” ROUND - 6.33” diameter, 1.45” depth 4.75” ROUND - 5.12” diameter, 1.42” depth 4.75” SQUARE - 5.12” height, 5.12” width, 1.42” depth Weight 6” ROUND - 1.2 lbs 4.75” ROUND - 1.14 lbs 4.75” SQUARE - 1.