Data Sheet
Table Of Contents
- General Description
- Key Features
- Applications
- Contents
- 1. References
- 2. Block Diagram
- 3. Pinout
- 4. Characteristics
- 1.
- 2.
- 3.
- 4.
- 4.1. Absolute Maximum Ratings
- 4.2. Recommended Operating Conditions
- 4.3. Current Consumption Summary: 2.4GHz GF Band
- 4.4. Current Consumption Summary: 5 GHz RF Band
- 4.5. Electrical Characteristics for DIO Pins
- 4.6. BLE and WLAN Coexistence Requirements
- 4.7. Reset Requirement
- 4.8. Thermal Resistance Characteristics for MOB Package
- 5. Detailed Description
- 6. Mechanical Specifications
- 7. Application Information
- 8. Design Guidelines
- 9. Soldering
- 10. Ordering Information
- 10.1 Regulatory
- Revision History
BDE-WF3135
BDE Dual-Band WiFi Network Processor Module
Datasheet
info@bdecomm.com
BDE Technology Inc.
1 / 34
General Description
BDE-WF3135 dramatically simplifies the implementation of Internet connectivity. This dual-band
Wi-Fi® network processor module can be added to any low-cost, low-power microcontroller unit
(MCU); it integrates all protocols for Wi-Fi® and Internet, which greatly minimize host MCU
software requirements.
This ROM-based subsystem includes an 802.11 a/b/g/n dual-band 2.4 GHz and 5 GHz radio,
baseband, and MAC with powerful hardware cryptographic engine. With built-in security protocols,
the BDE-WF3135 solution provides a robust and simple security experience. The BDE-WF3135 is
available in an LGA package that is easy to lay out with all required components including serial
Flash, RF filters, diplexer, crystal, and passive components that are fully integrated.
This generation introduces new capabilities that further simplify the connectivity of things to the
Internet. The main new features of BDE-WF3135 include:
• 802.11 a/b/g/n: 2.4 GHz and 5 GHz support
• 2.4 GHz Coexistence with Bluetooth® low energy radio
• Antenna diversity
• More concurrent secure sockets, up to 16
• Unique device identifier with ability to generate certificate signing request (CSR)
• Online certificate status protocol (OCSP)
• Wi-Fi Alliance® certified for IoT low power capabilities
• Hostless mode for offloading template packet transmissions
• Improved fast scan.
Key Features
Fully integrated and green/RoHS module
includes all required clocks, serial
peripheral interface (SPI) flash, and
passives
Integrated Wi-Fi® and internet protocols
802.11a/b/g/n: 2.4 GHz and 5 GHz
Rich set of IoT security features helps
developers protect data
Low-power modes for battery powered
application
Coexistence with 2.4 GHz radios
Industrial temperature: –40°C to +85°C
Wi-Fi network processor subsystem:
Wi-Fi core:
•802.11 a/b/g/n 2.4 GHz and 5 GHz
• Modes:
– Access Point (AP)
– Station (STA)
– Wi-Fi Direct® (only
supported 2.4 GHz)
• Security:
– WEP
– WPA™/ WPA2™ PSK
– WPA2 Enterprise
– WPA3™ Personal
Internet and application protocols:
• HTTPs server, mDNS, DNS-SD,
DHCP
• IPv4 and IPv6 TCP/IP stack
• 16 BSD sockets (fully secured
TLS v1.2 and SSL 3.0)
Built-in power management
subsystem:
• Configurable low-power
profiles (always on, intermittently
connected, tag)
• Advanced low-power modes
• Integrated DC/DC regulators
Application throughput
UDP: 16 Mbps
TCP : 13 Mbps
Multilayered Security Features:
Separate execution environments
Networking security