BCM BPR1000-PU/BPR1000-U/MOR600-N BPR1000 Mobile Router Quick Installation Guide 1. Verify Package Contents The BPR1000 Mobile Router package should contain the items Listed below . If any of the items are missing please contact your Reseller .
BCM BPR1000-PU/BPR1000-U/MOR600-N 2. Connections and LEDS 1 V 0.1 The following figures show the various connectors and status LED indicators on the BPR1000 Mobile Router . EZ Button Following table is for WWAN status.
BCM BPR1000-PU/BPR1000-U/MOR600-N Top USB Slot PCMCIA Slot Power Jack Side USB Slot Ethernet Port Power Jack The BPR1000 have two models can be choose, the one is BPR1000-PCMCIA + USB the other one is BPR1000-2USB. Note: For the BPR1000-2USB model, the two USB slots can not be activated at same time. If you plug in two data cards in Side USB slot and Top USB slot just only data card of Side USB will be activate.
BCM BPR1000-PU/BPR1000-U/MOR600-N 3. Getting Start 3 V 0.1 Before you Begin , make sure that your compatible 32-bit Data Card with broadband service.(Subject to services and Service terms available from your A：Insert carries) .
BCM BPR1000-PU/BPR1000-U/MOR600-N When connect the power adapter to back panel power Jack 。The power LED Will 4 V 0.1Turn ON to indicate power has been applied.
BCM Red 4. BPR1000-PU/BPR1000-U/MOR600-N Always On 5 Card Error V 0.1 Congratulation! You have Connected With Wireless Internet BPR1000 is PnP for your Data card. It Will Auto Configuration and enable the wireless Lan. If you have to any problem or need more advance feature Setting . Please refer the step 5 for more detail.
BCM 5. BPR1000-PU/BPR1000-U/MOR600-N Setting in Web page 6 V 0.1 A：Connect your PC/Notebook toBPR1000 LAN B：Open your browser Such as IE or Netscape and type Press Enter http://192.168.1.1 in address bar. And then you will see the authentication page as below. The default Username / Password is admin / admin.
BCM BPR1000-PU/BPR1000-U/MOR600-N C：Once logged in the following screen is displayed 7 D：Click Next for LAN Networking Setting V 0.
BCM BPR1000-PU/BPR1000-U/MOR600-N 8 IP Address Sub Mask Domain Name V 0.1 ： The IP Address of the LAN . The default IP address is 192.168.1.1 ： The subnet mask of the Lan ：Enter Domain Name if need. E：Click Next for WWAN Networking Setting 8 V 0.
BCM BPR1000-PU/BPR1000-U/MOR600-N Note：The WWAN fields may not be necessary for your connection. The information on this page will only be used when your service provider requires you to enter User Name and Password to connect to the broadband Network. Please Refer to your data card documentation or service provider for addition information. ISP ： Specific a Name for your recognition. User Name ： Enter the new User Name for your Data card connection.
BCM BPR1000-PU/BPR1000-U/MOR600-N F：Click Next for wireless network setting Disable Wireless Click check button to disable Wireless LAN interface. LAN Interface ： Band ： You can choose one of 2.4 GHz (B) , 2.4 GHz (G) or 2.4 GHz (B+G). The default is 2.4 GHz (B+G). SSID ： Enter your SSID name in the field provided. SSID names Can contain up to 32 ASCLL characters. Channel Number：Indicates the channel setting for the Mobile Router. By default the channel is set to 6.
BCM BPR1000-PU/BPR1000-U/MOR600-N 10 G：Click Next for Wireless Security setting SSID Encryption V 0.1 ： Enter your SSID name in the field provided. SSID names Can contain up to 32 ASCLL characters. ： You may select from five levels of encryption to secure your wireless Network：None; WEP; WPA(TKIP); WPA2(AES) or WPA2 Mixed . H：Click Finished complete your setting.
BCM BPR1000-PU/BPR1000-U/MOR600-N Fir 6. 6. Firmware Upgrade 11 V 0.1 Please follow the below step to upgrade your MOR600 firmware. A: Click Management Æ Upgrade Firmware item in left menu. You can see the following page. 11 V 0.1 B: Choose the new firmware in your PC HDD directory. Then Click Upload. BPR1000 will do the firmware upgrade. Once the upgrade was complete. The BPR1000 will auto reboot and system can work again. 12 V 0.
BCM BPR1000-PU/BPR1000-U/MOR600-N 產品:Mobile Router 根據交通部低功率管理辦法規定: 第十二條 經型式認證合格之低功率射頻電機，非經許可、公司、商號或使用者均不得擅自變更頻率，加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信:經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電信規定作業之無線電信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干 擾 You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. 1.
