Owner Manual

CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or
staining.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly
of this item
* This item should be assembled on a soft surface to prevent scratching the
finish during assembly
* This item may require periodic tightening
Part List and Hardware List
PIECE
DESCRIPTION
PICTURE
QUANTITY
A
SIDE FRAME
(L&R)
2X
B
BACK FRAME
1X
C
SEAT FRAME
1X
D
BACK
CUSHION
1X
E
SEAT
CUSHION
1X
F
LEGS
4X
G
CENTRE LEG
1X
HW1
SMALL
CROSS BOLT
M8x25mm
20X
HW2
SPRING
WASHER
20X
HW3
FLAT
WASHER
20X
HW4
MEDIUM
CROSS BOLT
M6x40mm
14X
HW5
BIG CROSS
BOLT
M6x70mm
4X
HW6
ALLEN KEY
1X
PREPARETION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes
Tools Required for Assembly (Not included): Phillips Screwdriver
WARNING
Product Dimensions: 74 4/5”W x 32 2/3” D x 30 1/3”H
Weight capacity: 375lbs
Warning: DO NOT STAND ON TABLE
Warning: DO NOT OVER TORQUE BOLTS