Assembly

ManualsBrandsBaxton Studio ManualsCabinetsMaclean Collection FM203-008-NATURAL WOODEN-CABINET Mid-Century Modern Rattan and Natural Brown Finished Wood 2-Door Storage Cabinet

10pcs

M3x14mm

8pcs

2pcs

M3x40mm

CARE INSTRUCTIONS:

TO BE ASSEMBLED ON A CLEAN, DRY AND SMOOTH SURFACE. WIPE CLEAN WITH A DRY CLOTH. NEVER USE

SCOURERS, ABRASIVES OR CHEMICAL SOLVENTS. CHECK AND TIGHTEN ALL PARTS REGULARLY. KEEP AWAY FROM

MOISTURE AND DIRECT SUNLIGHT.STORE IN A DRY PLACE.FOR INDOOR USE ONLY.

WARNING:

DO NOT STAND, SIT OR LEAN ON THIS UNIT. DO NOT USE THIS UNIT AS A STEP LADDER OR AS A CHOPPING SURFACE.

ENSURE THIS UNIT IS USED ONLY ON A FLAT SURFACE. DO NOT USE THIS UNIT UNLESS ALL BOLTS AND SCREWS ARE

FIRMLY SECURED. DO NOT PLACE HOT ITEMS SUCH AS COFFEE CUPS DIRECTLY ON THE SURFACE OF THIS FURNITURE

ITEM. KEEP AWAY FROM CHILDREN AND BABIES. THIS PACKAGE CONTAINS SMALL PARTS AND SHARP POINTS. ADULT

ASSEMBLY REQUIRED. A MILD ODOUR MAY BE PRESENT WHEN FIRST OPENING THIS CARTON. SIMPLY ALLOW TO AIR

OUTSIDE AND THIS WILL FADE. MAXIMUM SAFE LOAD: 20KGS FOR TOP,

KGS FOR INSIDE SHELF.

Summary of content (6 pages)

PAGE 1
CARE INSTRUCTIONS: TO BE ASSEMBLED ON A CLEAN, DRY AND SMOOTH SURFACE. WIPE CLEAN WITH A DRY CLOTH. NEVER USE SCOURERS, ABRASIVES OR CHEMICAL SOLVENTS. CHECK AND TIGHTEN ALL PARTS REGULARLY. KEEP AWAY FROM MOISTURE AND DIRECT SUNLIGHT.STORE IN A DRY PLACE.FOR INDOOR USE ONLY. WARNING: DO NOT STAND, SIT OR LEAN ON THIS UNIT. DO NOT USE THIS UNIT AS A STEP LADDER OR AS A CHOPPING SURFACE. ENSURE THIS UNIT IS USED ONLY ON A FLAT SURFACE. DO NOT USE THIS UNIT UNLESS ALL BOLTS AND SCREWS ARE FIRMLY SECURED.
PAGE 2
Attach handle (F) to Part (6) & (7) by aligning holes and securing with screw(E). Attach (K) to Part (5) & (6) by securing with screw (H).
PAGE 3
Attach Part (4)&(5) to Part (3) by inserting wooden dowel(A) and camlock (B)&(C). C B C Firstly , Insert Part(9) to Part (3)(4)(5) as below instruction. Secondly, Insert Part (9) to Part (1) as below instruction and also attach Part(4)(5) to Part(1) by inserting wooden dowel (A) and securing with camlock (B)& (C).
PAGE 4
Firstly , Insert Part(9) to Part (3)(4)(5) as below instruction. Secondly, attach Part(2) to Part (3)(4)(5)(9) by inserting wooden dowel (A) and male camlock (B). Insert Part (6)&(7) to Part (1)(2) by aligning holes. Attach Part (2)to Part (4)(5) by securing with female camlock(C).
PAGE 5
1 Attach (G) to each corner by securing with screw (D). Fix wall strap (I)to the product by securing with screw (D) and washer (J). Rotate leg (10) into the bottom one by one by aligning hole. Tighten each leg before turning assembled product upside down . Attach Part(8) to Part(1) by securing with screw (L).
PAGE 6
Drill Hole on the wall. Hammer (M)into the hole on the wall. Fix wall strap(I) to (M) by securing with screw (N) and washer (J) .