21067 Aldi AUS RC1 Cover.
143 * 210 mm 25.02.2011 09:00 1 58 cm (23") Full High Definition LED LED LCD TV with Inbuilt DVD Player and HD Tuner What Your 2 Year Warranty Means Great care has gone into the manufacture of this product and it should therefore provide you with years of good service when used properly. In the event of product failure within its intended use over the course of the first two years after the date of purchase, we will remedy the problem as quickly as possible once it has been brought to our attention.
143 * 210 mm 25.02.2011 09:00 2 Contents Safety Instructions ..................................................................................................... 5 Operational Safety ......................................................................................................................................... 5 Setup Location ................................................................................................................................................ 5 Repairs ................
143 * 210 mm 25.02.2011 09:00 3 DVD Mode ................................................................................................................. 20 Changing from TV Mode to DVD Mode .............................................................................................. 20 Inserting a DVD ............................................................................................................................................ 20 Operation through the LED Button Panel ......................
143 * 210 mm 25.02.2011 09:00 4 Connecting a Camcorder ......................................................................................................................... 41 With a Stereo Cinch Cable and a Video Cinch Cable .............................................................. 41 Device with HDMI or DVI Output .......................................................................................................... 42 Connecting an External Device with HDMI Output ...........................
143 * 210 mm 25.02.2011 09:00 5 Safety Instructions Operational Safety Children should be supervised to ensure they do not play with this unit. This unit is not intended for use by people (including children) with reduced physical, sensory or mental abilities or for those without experience and/or knowledge, unless they are supervised by a person responsible for their safety or they have been instructed on its use. Keep packaging material such as plastic film away from children.
143 * 210 mm 25.02.2011 09:00 6 Not standing your LED LCD TV on cloth or other materials placed between your television and supporting furniture. Educating children about the dangers of climbing on furniture to reach the television or its controls. In the first hours of operation, new devices may emit a typical, unavoidable but completely harmless smell, which will decline increasingly in the course of time.
143 * 210 mm 25.02.2011 09:00 7 Operational Environment The device can be operated at an ambient temperature of +5° C to +35° C and a relative humidity of 20% - 85% (non-condensing). In the switched-off state the LED LCD TV can be stored from -20° C to +60° C. Keep the device at a distance of at least one metre from high frequencies and magnetic sources of interference (television, loudspeaker boxes, mobile telephones etc.) to avoid malfunctioning.
143 * 210 mm 25.02.2011 09:00 8 The DVD Player The DVD player is a first class laser product. The unit has a safety system that prevents dangerous laser rays from escaping from the unit during normal use. In order to avoid eye injuries, never manipulate or damage the security system of the device. Notes on Conformity This device conforms with the Australian EMC framework.
143 * 210 mm 25.02.2011 09:00 9 Battery Handling Batteries can contain combustible materials. If not handled correctly batteries can leak, become very hot, ignite or even explode, which could damage your device or/and your health. Please ensure compliance with the following advice: Keep batteries away from children. Contact your doctor immediately if a battery is swallowed. Never charge batteries (unless it is clearly indicated). Never discharge batteries by high power output.
143 * 210 mm 25.02.2011 09:00 10 What is in the Box? Unpacking Select a suitable place for setting up the device. Open the box very carefully to avoid damaging the device. (The device could be damaged if you use a knife with a long blade to open the box.) The box contains a number of small items (including batteries). Keep these items out of reach of children; the parts are easy to swallow. Store the packaging material in a safe place; only use this box to transport the TV.
143 * 210 mm 25.02.2011 09:00 11 Device Overview LED LCD TV Front and Right-Hand Side View 1. LED LCD Display 2. LED LCD TV Mode indicator: orange when the device is in standby mode; blue when the device is switched on. 3. Infrared sensor: reception field for the infrared TV signals. 4. EJECT 5. Eject the disk Disk: Start or pause replay 6. VOL +/VOL - Adjust the volume or navigate in the menu 7. CH + /CH - Channel up/down or navigate in the menu 8.
143 * 210 mm 25.02.2011 09:00 12 Rear View / Connectivity 1. DVD Player 2. ANT. Connection using an antenna (analogue or DVB-T) 3. USB USB ports for MP3 and JPEG playback / PVR function 4. AUDIO IN L/R Audio inputs (red/white) for AV1 5. AV1 Video input 1 (yellow) 6. YPbPr IN 3.5 mm jack component input for the connection of devices with a component output (use the YPbPr adapter) 7. Connectivity for headphones with 3.5mm jack 8. VGA VGA connection: to connect a PC or Notebook 9.
3 * 210 mm 25.02.
143 * 210 mm 25.02.2011 09:00 14 1 2 3 POWER, i.e. switch off the LED LCD TV temporarily FAV FAVFAV+ Open favourites list P.MODE Choose picture mode Previous favourites station Next favourites station 4 S.
143 * 210 mm 25.02.2011 09:00 15 23 REPEAT DVD: Setting the playback mode Yellow button 24 A-B DVD: Setting the AB repeat Blue button 25 DVD: Previous title/previous section 26 DVD: Next title/next section 27 REVEAL DVD: Fast rewind 28 SUBPAGE SUBTITLE DVD: Subtitle function for DVD player 29 TV/RADIO D.
143 * 210 mm 25.02.2011 09:00 16 Getting Started Before starting up please make sure that you read the "Safety instructions" section on page 5ff. Inserting the Batteries into the Remote Control Open the battery compartment cover on the back of the remote control. Insert two R03 (AAA) 1.5-V batteries in the battery compartment of the remote control. Check the battery polarity (inscribed on the bottom of the battery compartment). Replace the cover.
143 * 210 mm 25.02.2011 09:00 17 Press the POWER button to switch the device over to standby mode again. The unit continues to consume power in this mode. Press the mains switch at the back of the unit to switch it off completely. First Time Usage After switching on the device for the first time, you will be guided through the initial installation process: First Time Installation. This can be called up any time via the menu SETUP > First Time Installation and can be carried out again.
143 * 210 mm 25.02.2011 09:00 18 Channel Selection To select a TV channel, either press the buttons CH+/– (on the device or on the remote control) or select the channel directly by pressing the appropriate numbers. Enter the numbers directly in sequence for a two-digit or three-digit number. Press the button to select the last channel played. Volume Setting You can increase or decrease the volume by pressing the volume buttons VOL +/- on the remote control or on the device.
143 * 210 mm 25.02.2011 09:00 19 You can also change these settings in SETUP > Aspect Ratio. Note: Please note that not all picture formats will be available depending on the image source setting.
143 * 210 mm 25.02.2011 09:00 20 DVD Mode The inbuilt DVD player is managed via DVD Mode. Changing from TV Mode to DVD Mode Call up the selection list of the sources with the AV/INPUT button. Go to DVD with the direction buttons. Confirm your selection with the OK button. Repeat this process and select the ATV or DTV option, according to the aerial signal received, instead of DVD, if you wish to return the TV Mode.
143 * 210 mm 25.02.2011 09:00 21 Operation through the LED Button Panel The following functions will be available through the operating buttons on the LED LED LCD TV: EJECT Eject button Eject the DVD from the slot PLAY/PAUSE button; start or pause the replay You will have to use the remote supplied with the device to enter additional functions or commands.
143 * 210 mm 25.02.2011 09:00 22 1 POWER, i.e. switch off the LED LCD TV temporarily 9 Direction buttons 10 OK 14 LANG DVD: Language selection in DVD playback 15 ANGLE DVD: Select camera position (angle) in DVD playback 16 ZOOM DVD: Zoom function for DVD player 17 D.DISPLAY DVD: Displays information on DVD currently inserted, e.g. section, playback time elapsed, etc. GOTO DVD: Select a section on a DVD 18 19 Confirm selection in specific menus.
143 * 210 mm 25.02.2011 09:00 23 DVD Menu System You will call up the DVD menu system with the DVD SETUP button. SYSTEM SETUP Menu Menu Point Setting TV SYSTEM Setting of the TV system. Possible settings: NTSC (e.g. for the USA) , PAL (Germany and other European countries), AUTO TV TYPE Setting of the picture format. Possible settings: 4:3 PS, 4:3 LB, 16:9 PASSWORD Entry of a password for child protection. Child protection is locked in the status at delivery.
143 * 210 mm 25.02.2011 09:00 24 LANGUAGE SETUP Menu Menu Point Setting OSD LANGUAGE Select the language of the OSD menu. It will be changed immediately. AUDIO LANG You will set the language of the DVD through this, if it has a choice of several languages. SUBTITLE LANG You will switch on the sub-titles of the DVD through this, if it has them. MENU LANG You will set the menu language of the DVD through this, if it has several menu languages.
143 * 210 mm 25.02.2011 09:00 25 Media Mode The LED LCD TV comes with 2 USB ports (rear) that can be accessed via Media mode. Media Mode and USB Connectivity ► ► ► ► ► ► ► ► ► ► ► ► Plug in your external USB device (USB stick, external hard disk drive) into the USB port of the TV. Drive numbers (C:\, D:\, E:\ etc) will be allocated depending on the partitions of the USB device (e.g. an external hard disk drive might have several partitions).
143 * 210 mm 25.02.2011 09:00 26 Recording via record button (PVR or red button) While watching DTV programs, press the PVR button (red button) on the remote control. A symbol for recording will be shown in the upper left-hand corner of your screen. Make sure that the allocated capacity for the recording is sufficient to complete the recording of the program you want to safe. (The capacity is determined by how large the formatted PVR file folder is allocated, or how large the USB thumb drive can support.
143 * 210 mm 25.02.2011 09:00 27 Time Shift function ► ► ► During any recording, you can press the “Play” button to start watching the program that is being recorded. The recording itself will continue in the background while you can watch the recorded program from the start. While watching/playing the recording program this way, you can use all the media functions (fast forward, fast backward and pause etc) for the playback.
143 * 210 mm 25.02.2011 09:00 28 Switching between TV Mode and Media Mode Use AV/INPUT to call up the source selection list. Use the direction buttons to go to Media. Confirm your selection by pressing OK. Repeat this process to return to TV mode but, instead of selecting Media, choose the ATV or DTV option, depending on the aerial signal.
143 * 210 mm 25.02.2011 09:00 29 Basic OSD Menu Settings You can customise certain functions of the OSD (On-Screen Display) menu. Navigating within the Menu Press the MENU button to activate the OSD. The available options are displayed on the lower edge of the screen. You can use the direction keys to select the options from the main menu. Use OK or to switch over to the menu entries. You can use the direction keys to select the options from the any of the menus.
143 * 210 mm 25.02.2011 09:00 30 Menu System CHANNEL Menu Menu item Setting Auto Tuning Perform the search here. DVB-T Manual Tuning You can program individual channels in DTV mode manually here. ATV Manual Tuning Programme Edit You can program individual channels in ATV mode manually here. Current CH Use this to select the channel you would like to address. Colour System PAL, SECAM, Auto. For Australia, the colour system is set to PAL. Sound System BG, DK, L, I.
143 * 210 mm 25.02.2011 09:00 31 Rename Select the transmitter that you wish to rename and press the green [INTRO] key. Now, you will be able to change the first letter; you will be able to scroll up and down through the letters with the direction keys. Move to the next drive letter with direction key, etc. Press the green [INTRO] key again at the end to save the name. Move Select the programme and press the yellow button [REPEAT].
143 * 210 mm 25.02.2011 09:00 32 PICTURE Menu Menu Item Setting Picture Mode Select picture mode: Standard, Soft, Personal, Dynamic. This function corresponds to the P.MODE button. The Personal setting lets you set the Contrast, Brightness, Colour, Tint and Sharpness yourself. The other parameters are defined. Contrast Increase or decrease contrast (on a scale of 0 – 100). Brightness Increase or decrease brightness (on a scale of 0 – 100).
143 * 210 mm 25.02.2011 09:00 33 SOUND Menu Menu Item Setting Sound Mode Select audio mode: Standard, Music, Movie, Sports, Personal. This function corresponds to the S.MODE button. The Personal setting lets you set the Treble, Bass and Balance yourself. The other parameters are defined. Treble Increase or decrease treble (on a scale of 0 – 100). Bass Increase or decrease bass (on a scale of 0 – 100). Balance Set the balance between the left and right speakers.
143 * 210 mm 25.02.2011 09:00 34 TIME Menu Menu Item Setting Clock Time display. No setting possible. Time Zone This lets you set the time zone. This option is only available in DTV mode. Sleep Timer Select a time after which the device should switch itself off automatically. Select Off to end the function. Auto Standby Set the time by which the LED LCD TV will switch itself off automatically here. OSD Timer Here you can set the time after which the OSD menu will close automatically.
143 * 210 mm 25.02.2011 09:00 35 LOCK Menu Menu Item Setting Lock System This is used to unlock the settings Block Program, Parental Guidance and Key Lock. To do so, enter the password. Delivery state: 0000. Set Password An input field for entering the passwords will appear. Please enter old password Use the number buttons to enter the existing password. Delivery state: 0000. Please enter new password Enter a new four-digit password. Confirm new password Enter the new password again.
143 * 210 mm 25.02.2011 09:00 36 SETUP Menu Menu Item Setting OSD Language Select the language of the OSD menu or of the TT language. It will change immediately. TT Language The default setting is West. If you are in a different language area, you can change the language setting. Hearing Impaired If the station transmits special audio signals for the hearing impaired, you can set the setting to On to receive these signals. This option is only available in DTV mode.
143 * 210 mm 25.02.2011 09:00 37 EPG - PROGRAMME GUIDE Open the Electronic Programme Guide with the EPG button. This function will only be available to you in the in the DTV Mode. You will see the current and the next station in the Table. Select a programme with . Go to the programme guide of the programme selected with Scroll through the stations with . Pay attention to the fact that: The programme information displayed is created by the transmitting organisations.
143 * 210 mm 25.02.2011 09:00 38 Yellow Button [REPEAT] Schedule Shows the list of the programmes that have been programmed by the Memory function. See the next point for the programming of a memory. You can delete a programme from the timetable with the red [PROGRAM] button. Blue button [A-B] Remind Puts the selected programme into the timetable. The device will switch to the programme set automatically as soon as the time programmed is reached. .
143 * 210 mm 25.02.2011 09:00 39 Connecting External Devices Connecting Headphones The headphones are connected via headphone socket. Caution! Using headphones at high volume generates excessive acoustic pressure and can result in permanent hearing damage. Before pressing play, set the volume to the lowest setting. Start playback and increase the volume to a comfortable level. Changes to the basic equaliser settings can increase the volume and thus damage your hearing permanently.
143 * 210 mm 25.02.2011 09:00 40 3. HDMI Cable If your device has a HDMI output, connect a HDMI cable (not supplied) to the HDMI input of the LED LCD TV and to the HDMI output of the external device. Connecting a Video Recorder (VCR) Connect an antenna cable between the antenna socket on the LED LCD TV and the output on the video recorder. Connect an additional antenna cable between the antenna input on the video recorder and the antenna socket in the wall.
143 * 210 mm 25.02.2011 09:00 41 Connecting a Set Top Box (SAT, DVB-T, Decoder, Etc.) There are different options for connecting a receiver (e.g. SAT receiver, DVB-T receiver, decoder, set-top box) to your LED LCD TV. 1. Stereo Cinch Cable and a Video Cinch Cable Connect a video cinch cable (yellow jack) between the video input on the LED LCD TV and the video output on the external device.
143 * 210 mm 25.02.2011 09:00 42 Device with HDMI or DVI Output HDMI ("High Definition Multimedia Interface") in consumer electronics is the only interface that transmits audio and video data simultaneously. It handles all image and sound formats currently in use, including HDTV (High Definition TV), which means it can also display resolutions of 1080i without any loss in quality. Many consumer electronic devices, e.g. DVD players, are now equipped with HDMI outputs.
143 * 210 mm 25.02.2011 09:00 43 Troubleshooting Malfunctions can sometimes have quite trivial causes, but on other occasions they are the result of defective components. We would like to give you a few options for rectifying your problem. If these tips don’t do the trick, then we’ll be more than pleased to help you out. Just give us a call! You’ll find the phone numbers on the back inside cover, under the warranty conditions. Fault Solution There is no picture and no sound.
143 * 210 mm 25.02.2011 09:00 44 Fault Solution There are stripes on the display or the colours are faded. Is there interference from another device? Transmission antennae on radio stations, ham radios and portable phones can also cause interference. Operate the device as far as possible from the device that might be causing the interference. The buttons on the device are not working properly. The child lock might be on. The remote control does not work.
143 * 210 mm 25.02.2011 09:00 45 LED LCD TV Pixel Faults Despite the most modern production methods, the highly complex technology involved in producing this type of device means there may be individual or multiple pixel drop-outs (dead pixels). This is rare, however. For active matrix TFTs with a resolution of 1920 x 1080 pixels, which are each made up of three sub-pixels (red, green, blue), there are a total of approx. 6.2 million control elements in use.
143 * 210 mm 25.02.2011 09:00 46 Cleaning You can increase the lifespan of your device as follows: Caution! Always unplug the unit and disconnect all cables before cleaning. To protect the TV from scratches, protective film has been applied to the high-gloss finish. Remove the films after you have set up the TV set correctly. If the high-gloss finish becomes dirty, wipe off the dust first. Then wipe down gently with a cleaning cloth.
143 * 210 mm 25.02.2011 09:00 47 Disposal Packaging Your device has been packaged to protect it from sustaining damage in transit. The packaging is made of environmentally-friendly material which can be recycled. Device At the end of its service life, the device should not be disposed of with the household rubbish. Please enquire about the options for environmentally-friendly disposal.
143 * 210 mm 25.02.2011 09:00 48 Technical Specifications Model number: P14063 (MD 21067) Nominal voltage 220-240 V ~ 50/60 Hz Screen size: 58 cm (23") LED LCD, 16:9 Display Power consumption: max.
143 * 210 mm 25.02.2011 09:00 49 Laser performance of the DVD player Pay attention to the Laser Class 1 imprint, if you use audio CDs. Please pay attention to the following: There are many, partly non-standardized CD recording processes and copy protection processes, and different CD-R and CD-RW blanks today. Input errors or delays can arise in individual cases because of this. This is not a defect in the device.
143 * 210 mm 25.02.