OVERVIEW Battenfeld Technologies Inc.
MOUNTING Battenfeld Technologies Inc. The Puck includes a mounting plate for easy installation. Once the desired mounting location is determined, the plate can be installed with the four screws or with two-sided adhesive. The Puck attaches to the mounting plate by sliding over the two tabs and then downward.
DOOR SENSOR Battenfeld Technologies Inc. The Puck has an integrated hall-effect sensor that uses a magnet to determine if the door is open or closed. The magnet must be installed so it is within ~¼ inch of the sensor inside Puck when the door is closed (refer to slide 2 for the sensor location.) To assist in setup, the Puck will chirp anytime it detects the door opening or closing. This will allow you to easily determine if the magnet is properly aligned with the sensor.
WI-FI Battenfeld Technologies Inc. To connect to a wireless network, or change the network credentials, follow these instructions: 1. Press and hold the Puck screen for 6 seconds (orange lights will begin flashing) 2. Open the Wi-Fi settings on your mobile device and select the Lockdown network a) The password is: lockdown 3. Once connected, open a web browser and navigate to Lockdown.com a) If you are using an iPhone, this page should automatically load 4.
PUCK FUNCTIONS The Puck can be fully operated through the website on a mobile device or PC https://uat.btibrands.app/lockdown/app Use the dropdown list to choose your device, enter the desired settings, and press Submit Battenfeld Technologies Inc. The Puck can also be armed and disarmed by the touch-sensitive Puck face To Arm: Double click the face.
WEBSITE CONTROLS Battenfeld Technologies Inc. Device: Use the Dropdown list to select the device registered to you Please do not Puck over others by changing their settings Armed Status: Use the slider to Arm/Disarm the Puck When it arms, the Puck will triple beep When it disarms, the Puck will beep long then short When armed, the Puck will alarm and send an email alert when it detects motion or the door opens Motion Alert: Use the slider to enable the internal accelerometer.
TEST DATA Battenfeld Technologies Inc. As a member of the Lockdown testing team, your feedback is essential to improving the product and user experience. We will periodically ask for feedback throughout the testing stage. • As you use the Puck, please note where and how it was used (i.e. in a vault, a gun room, liquor cabinet, desk drawer, etc.) and take some photos of the installation. • If you change the location, simply note when you changed it and the new setup details.
Battenfeld Technologies Inc. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.