Instructions / Assembly

PREMIUM REFINISHING KIT INSTRUCTION MANUAL
Tub, Tile, Wall Surround, & Sink Renishing Kit
Step 1: Clear the tub of all personal items. Make sure there is positive
air-ow as well as good ventilation on work areas at all time.
CLEAN TUB THOROUGHLY! Scrub bathtub with Ajax or Comet paying
special attention to heavy soap area's. NOTE: ANY soap residue left behind
will prevent bonding and cause failure.
Step 2: Using either a razor blade or sharp scraper remove the caulk
around bathtub or walls. (optional)
Step 3: With a single edge razor blade scrape down the bathtub
thoroughly keeping special attention to areas under the soap tray and
drain area. Wipe all scrapings and foreign materials into a trash bag that
should be next to you at all times for garbage. Never place tools or scraper
on toilet seat covers, counter tops or linoleum oors. Scrub the bathtub or
walls thoroughly with Scotch-Bright pad or sponge using etching cleaner
provided with warm water. Use protective gloves and eye protection.
Water can be used from the bathtub or bucket. Rinse well. While the
bathtub or walls is still damp, sand the bathtub completely using sand
paper provided. Rinse well.
Step 4: Place glove or plastic bag over the tub spout and shower head to
avoid water dripping on the bathtub. Using a blow dryer or strong wet-vac,
blow water out of drain and wall areas. NOTE: Drying the complete surface
especially at the drain is extremely important. ANY moisture while rolling
will result in failure. When the surfaces are very dry, use blue painters tape
to mask o walls around bathtub and tub drain. If renishing both bathtub
and walls, you will not need to tape o the wall area around the bathtub.
Limited Warranty: Tub Renishing, Inc. DBA Munro Products or
Munro Bath Systems as follows; this warranty is in lieu of all other written
or unwritten, expressed or implied warranties, and Tub Renishing, Inc.
DBA Munro Products or Munro Bath Systems expressly disclaims any
warranty of merchantability or tness for a particular purpose. The buyer
assumes all risks whatsoever as to the use of the material. Keep away from
children, animals, or persons that are sensitive to paint or fumes. Fumes
can be harmful to humans and animals, and can also be ammable.
Safety: A protective respirator can be worn if available. Use product
with adequate ventilation. Always use rubber gloves.
Tub Renishing, Inc., DBA Munro Products or Munro Bath Systems, is not
responsible for accidents or misuse of these products or parts and
materials of this kit. Safety is in the hands of the user. If you are unsure
about the use or safety of this product please return the unopened and
unused kits to the supplier. Do not return goods without receiving a
Return Materials Authorization (RMA) number from Munro Products. All
returned goods are at the purchasers cost. Opened or used materials will
be refused for credit. See all MSDS Sheets which are provided and are also
available via our websites. http://www.bathtubrenishingkit.net
Suitability for use: The user is responsible for establishing that these
products are suitable for the user’s application and that all requirements
for meeting approvals, standards, codes, disposal, use and regulations of
any kind are satised. Distributor denies any responsibility for establishing
suitability of use; where, when, and how the materials from this kit are
used. Read all information and instruction before use of this product. Use
Caution!
Tub Renishing, Inc. DBA Munro Products, Munro Bath Systems, and
BathWorks™. BathWorks™ is an exclusive trademark of this company.
For Emergency: CHEMTREC® 1-800-424-9300