User's Manual

ManualsBrandsBaseus ManualsAppliancesWater Filtration Vacuum Cleaner

Baseus X3 Floor Cleaner User Manual

Please read the instructions in this user manual carefully before using the product and keep it in a safe

place.

Caution:

Warning

Before using the product, please carefully read all of the manual, and follow the steps to install and use

the X3. If you let a third party use the floor cleaner, please keep this manual with the product to ensure

they follow the proper steps. Any operation that deviates from the instructions in the manual may result

in product damage or serious personal injury. This product is only suitable for operation in a normal

home indoor environment.

The product is not intended for use by persons with physical, sensory or intellectual disabilities or

persons lacking experience and good judgment (including children) unless supervised or instructed by

others to ensure safe use of the product.

Do not touch the plug or any live part of the product with wet hands to avoid the risk of electric shock.

Please stop using the product if the charger or plug is damaged and call Baseus professional

maintenance personnel for product replacement to avoid any hazards.

Keep the air passages and moving parts of the floor cleaner away from long hair, loose clothing, fingers

and other body parts. Do not point the vacuum hose, accessory tip or tool closely into eyes or ears, or

put them in the mouth.

If there is electrical leakage, the motor temperature is too high, or an abnormal sound is generated

during use and there are issues such as overheating, abnormal sound, odor, or weak suction, you should

stop using the product immediately and call Baseus professional maintenance personnel.

Please use only the Baseus charger to charge the product. Other types of chargers may cause battery

failure or extreme thermal effects.

If the product is not used for a long time, turn off the power supply and unplug the charging base.

After using the product, please clean the dirty water tank. Keep the ventilation path unobstructed.

Avoid blockages that will cause a loss of suction or cause the motor to overheat. This will shorten the

service life.

After using the product, please store it in a dry place. The main unit contains electrical parts and cannot

be soaked in water or rinsed.

Please check the smoothness of the nozzle regularly. If there is any blockage, remove it to avoid loss of

suction, as this will shorten the service life.

Please turn off the X3 before replacing the roller brush.

In case of product failure, do not repair it yourself. Please call Baseus professional maintenance

personnel.

All technical and other data reflected in this user manual has been obtained by Baseus or a designated

third-party testing company. Baseus reserves the final rights for interpretation.

Summary of content (10 pages)

PAGE 1
Baseus X3 Floor Cleaner User Manual Please read the instructions in this user manual carefully before using the product and keep it in a safe place. Caution: Warning Before using the product, please carefully read all of the manual, and follow the steps to install and use the X3. If you let a third party use the floor cleaner, please keep this manual with the product to ensure they follow the proper steps.
PAGE 2
Application Scope The X3 is suitable for hard floors in indoor environments, including waxed floors, millstone floors, rubber floors, marble floors, granite floors, terrazzo floors, solid wood floors, laminate floors, bamboo floors and various flat surfaces such as mirror tiles, and porcelain tiles. The product may not provide its best performance when used on uneven surfaces. Do not use this product near or on flammable or explosive objects, as there is a risk of fire and explosion.
PAGE 3
Product Introduction: Packing List Charging base (Figure 1), handle assembly (Figure 2), main unit (Figure 3), cleaning brush (Figure 4), roller brush (Figure 5), special floor cleaning solution (Figure 6), filter element (Figure 7), and power adapter (Figure 8) Note: The illustrations in this manual are for reference only. The appearance is subject to the actual product.
PAGE 4
Product Installation: Installing the handle (Figure 12) Insert the end of the handle in the vertical direction into the port on the main unit until you hear a click. Ensure that the handle is tight. To remove, press the handle in the installation hole and pull out the handle upwards. (Figure 13) To disassemble, insert a hard object into the hole on the back of the main unit to press the spring clip, and pull the handle upwards at the same time.
PAGE 5
GB standards: GB4706.1-2005, GB4706.7-2014, GB4343.1-2018, GB17625.1-2012 Note: The above data comes from Baseus labs and exact usage varies according to the actual environment. As the product is continuously improved, this document is subject to actual product updating. Baseus reserves the rights to product updates. Instructions: (Figure 21) The X3 enters the standard mode upon startup by default. You can switch between standard and efficient modes by pressing the power-on/off and mode switching button.
PAGE 6
Add a Device (Figure 31) Add a device after logging in using the mobile number. Select the product model and manually add the device network (for iOS users, manually switch to the home Wi-Fi network). Configuring a Network Enter the network connection preparation state according to the steps shown in the figures (Figure 1, Figure 2, and Figure 3). Search for a device and add it to the network (Figure 4 and Figure 5). Select the home network name and enter the password (Figure 6).
PAGE 7
Cleaning the filter element filter (Figure 36) Regularly remove the filter from the top cover of the dirty water tank, rinse the attached dirt with clean water, and place it at the vent to keep the filter dry and clean. Cleaning the roller brush (Figure 37) Regularly take out the roller brush, use the provided roller brush cleaning tool to remove hair or debris entangled in the brush, rinse the roller brush with clean water, and regularly place it in the vent to keep the roller brush dry and clean.
PAGE 8
Error Code Table Error Code E1 E2 E3 E4 E5 E6 E7 F1 F2 F3 F4 F6 F9 Cause Battery is disconnected Rechargeable battery voltage is too low Rechargeable battery voltage difference is too large Abnormal temperature control of battery pack Discharging temperature is too high Charging temperature is too high Charging temperature is too low Overcurrent charging Short circuit protection Overcurrent discharging Overcurrent discharging of roller brush Dirty water tank is not installed.
PAGE 9
(3) If the customer purchases the product in a local offline store, the customer can entrust an agent to provide replacement service. In addition, the customer can also contact the brand manufacturer for after-sales service. 4、 Please keep the purchase invoice and related vouchers as proof for warranty services. 5、 If the product fails within the warranty period and the fault cannot be eliminated according to the troubleshooting methods, call the Baseus customer service hotline (400-071-2711).
PAGE 10
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.