* Barton TankScan™ W-Series WL20 Level Monitor Installation Manual Version 99L16m 1D#11683 8/2000 The Tank Scan Wireless Level System has four main components: Monitor, Controller, Fill Indicator, and PC Host Software. The Monitor consists of an electronics housing and a “wave guide” probe for measuring tank fluid level. The Controller includes a Radio/Modem enclosure, an antenna, and an AC power adapter. The Fill Indicator assembly includes a focal display {to view level during fill}, an audible alarm.
Specifications | ‘WL20 Level Monitor Measurement Method Micro power Impulse Radar (MIR) Measured Value Level Accuracy £0.25" or 0.5% of active probe length {whichever is greater) ® Output Transmits ID, level data, and diagnostics Radio Communications ..
COMPLIANCE STATEMENTS FCC COMPLIANCE STATEMENTS FOR WL20 FCC PART 15 NOTICE This equipment has hen tested and found to comply with the limits for Class A digital device. pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated In a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual.
Order Code Tank Sean W-Series A o LEVELER MONITOR CONFIGURATION WL2]si-] ss X RADIO North America (02-928 MHz} | 0 Europe MH2) PROBE LENGTH i (024 to 250 Inches in 1-inch increments) FLUID DIELECTRIC RANGE Town] L High (32 and higher) | H PROBE CONSTRUCTION FLUID DIELECTRIC MATERIAL | PROBE LENGTH {ow Dielectric Flange above} | (Probation) inks tom) brassiness 24-63 (61-160) Low Cooperativeness | 64-240 (162-610) A B {"L" Range Selection Only} | SST/SST 24-63 (81-160) < Copper/SST 164-240 (182-610) 1D Brass