User Manual Mobile Computer MC 9090ex-G Type 17-A129-0G.0/H….. Mobile Computer MC 9090ex-K Type 17-A129-0K.0/H….. UL Version Version 3.00 Status: June, 19th 2007 Technical data subject to change! GmbH Max-Eyth-Straße 16 97980 Bad Mergentheim Germany Phone: +49 7931 597-0 Fax: +49 7931 597-183 Contact: support-polaris@bartec.
Indroduction Before commissioning the devices, please read through the relevant documents carefully. Target group: 60079-17. Experienced and trained specialists acting in compliance with the NEC 500, IEC 60079-19 and IEC This user manual contains important information, safety instructions and test certificates that are necessary for perfect functioning when operating and handling the Mobile Computer.
Contents Mobile Computer MC 9090 1. Product description ..................................................................................................................................10 1.1 General ......................................................................................................................................10 1.2 Use.............................................................................................................................................11 1.3 Advantages .....
Inhaltsverzeichnis 4. Commissioning .........................................................................................................................................33 4.1 Mobile Computer........................................................................................................................33 4.2 Display .......................................................................................................................................33 4.3 Battery..........................
Contents Mobile Computer MC 9090 7. Maintenance ..............................................................................................................................................51 7.1 Care of the Battery .....................................................................................................................51 7.2 Cleaning the Battery Contacts....................................................................................................51 7.3 Information about Repairs.......
User Manual Mobile Computer MC 9090 1. Product description 1.1 General ex The MC 9090ex-G and MC 9090ex-K Mobile Computers each form a compact unit for high-standard barcode scanning in hazardous (potentially explosive) areas. The comfortably positioned scan trigger and the ergonomic design of the MC 9090ex device series allow the acquisition of data with one-hand operation. The MC 9090ex device series is available in various versions.
Mobile Computer MC 9090 1.2 ex Use The Mobile Computer is a hand-guided electrical device used for the mobile acquisition, processing and radio transmission of data in hazardous areas. The Mobile Computer is used in areas of Class I Div 1. The MC 9090ex series is specially intended for use in Class I Div 1, Group C, D. It is not allowded to use the MC 9090ex in Class Ι Div 1 Groups A and B, Class II and Class III. 1.
User Manual Mobile Computer MC 9090 2. Safety instructions 2.1 Warnings about the Mobile Computers WARNINGS ■ The device may not be opened by the user outside the hazardous area either! The user may not make any alterations to the device. Do not exchange or replace components and do not retrofit any components on internal plug connectors or slots. If components other than those specified are used, the protection against explosions can no longer be assured.
Mobile Computer MC 9090 ex CAUTION ■ Do not open or charge the device and do not exchange any data through the "cradle contacts" on the battery in the hazardous area! Operating the 17-pin data interface (see Chapter 3.
User Manual Mobile Computer MC 9090 ATTENTION Equipment that is damaged in any way or that does not function proberly must instantly be removed from the hazardous area and sent in for inspection/repair! ■ Take the device out of the hazardous areas before wiping it with a dry cloth or cleaning it! ■ General statutory regulations or directives on safety at work, accident prevention regulations and environmental protection legislation must be complied with, e.g.
Mobile Computer MC 9090 2.2 ex Warnings for battery WARNING ■ The battery may only be charged outside the hazardous area! ■ It must be ensured that only original batteries of the type 17-A1Z0-0002 with 7.4 V/2200 mAh are used in safety-oriented operation. The use of imitation batteries or batteries from other manufacturers will render the type of ignition protection ineffective and there will then be a risk of fire or explosion. ■ Keep away from children.
User Manual 2.3 Mobile Computer MC 9090 ex Warnings about Laser Devices Devices equipped with Symbol lasers conform to the US 21CFR1040.10 and IEC 825-1:1993, EN 60825-1:1994+A11:1996 standards. The laser classification is marked on one of the labels on the device. Class 1 laser devices are rated not hazardous when used in the manner intended.
Mobile Computer MC 9090 ex ■ Servicing Regular servicing is not necessary if the equipment is operated correctly in accordance with the installation instructions and environmental conditions. ■ Inspection In accordance with IEC 60079-19 and EN 60079-17, the owner-operator of the electrical installations in potentially explosive areas has an obligation to have these installations checked by a qualified electrician to ensure that they are in a proper condition.
User Manual 2.5 Electromagnetic Fields 2.5.1 International Mobile Computer MC 9090 ex The device complies with Internationally recognised standards covering human exposure to electromagnetic fields from radio devices. Reducing RF Exposure - Use Properly Only operate the device in accordance with the instructions supplied. 2.5.2 Portable Devices This device was tested for typical body-worn operation.
Mobile Computer MC 9090 2.6 ex Health and Safety Recommendations Use only the accessories, batteries and battery chargers approved by BARTEC. Do not attempt to charge damp/wet Mobile Computers or batteries. All components must be dry before being connected to an external power supply point. 2.6.1 Ergonomic Recommendations ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 2.6.
User Manual 2.7 Mobile Computer MC 9090 ex Warnings for Use of Wireless Devices Please observe all warning notices with regard to the usage of wireless devices. 2.7.1 Safety in Aircraft Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers a 'flight mode' or similar feature, consult airline staff as to its use in flight. 2.7.
Mobile Computer MC 9090 2.7.5 ex Radio Frequency Interference Requirements-FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
User Manual Mobile Computer MC 9090 3. Technical data 3.1 Explosion Protection Type : 17-A129-0G.0/H...... and 17-A119-0K.0/H...…. Ex protection type : Class Ι Div 1 Groups C and D, T4 Ex ia Certification : File No. E226123 3.2 General data Dimensions (height x width x depth) Type 17-A119-0G.0/H....... Version "Gun" : 231 mm x 91 mm x 193 mm 9.1 inch x 3.6 inch x 7.6 nch Type 17-A119-0K.0/H....... Version "Brick" : 231 mm x 91 mm x 56 mm 9.1 inch x 3.6 inch x 2.
Mobile Computer MC 9090 Interfaces : RS232, max. 115.2 kbps, min. 1200 bps USB Vers. 1.1 (client) Keypad versions : "Gun" version and "Brick" version ex As an alternative, the 53-key version is also available with emulation key printing 28 keys 43 keys 53 keys No emulation software is installed on the Mobile Computers with the emulation key version. The customer must order the emulation software separately from Symbol/Motorola and its distributors and install it himself.
User Manual Mobile Computer MC 9090 3.3 Technical data Scan Engine and decode zone 3.3.1 Scan Engine for type 17-A129-0GJ0/H...... (Long Range Scan Engine) Laser diode : visible red light 650 nm Scan rate : 35 scans / sec. ± 5 (bi-directional) Scan angle : 13.5° ± 0.
Mobile Computer MC 9090 3.3.2 ex Scan Engine für Typ 17-A129-0KA0/H...... (Standard Range Scan Engine) Laser diode : visible red light 650 nm Scan rate : 104 scans / sec.
User Manual 3.3.3 Mobile Computer MC 9090 Scan Engine for type 17-A12.-0KK0/H......
Mobile Computer MC 9090 3.4 ex Technical data WLAN / WPAN WLAN (integrated radio module) Radio standard : IEEE 802.11a/b/g (direct sequence topologie) Data rate : IEEE802.11a: IEEE802.11b: IEEE802.11g: up to 54 Mbit/Sek. up to 11 Mbit/Sek. up to 54 Mbit/Sek. Frequency range : IEEE802.11a: IEEE802.11b: IEEE802.11g: 5 GHz 2.4 GHz 2.
User Manual 3.5 Mobile Computer MC 9090 ex Technical data Battery Battery : (only rechargeable in the safe range) Operating temperature Storage temperature Type 17-A1Z0-0002 Lithium Ion 7.4 V / 2200 mAh when charging : 0 °C to +40 °C 32 °F to 104 °F when discharging : -20 °C to +40 °C -4 °F to 104 °F ≤ 1 year : -25 °C to +20 °C -13 °F to 68 °F ≤ 3 months -25 °C to +45 °C -13 °F to 113 °F ≤ 1 months -25 °C to +60 °C -13 °F to 140 °F : 20 % - 85 % (not condensing) : 3.
Mobile Computer MC 9090 3.6 Product Marking 3.6.1 Mobile Computer MC 9090ex Warning Laser ex CAUTION - CLASS 3R LASER LIGHT WHEN OPEN. AVOID DIRECT EYE EXPOSURE. ATTENTION - LUMIÈRE LASER DE CLASSE 3R, EN CAS D’OUVERTURE. EXPOSITION DANGEREUSE AU FAISCEAU. VORSICHT - LASERLICHT KLASSE 3R, WENN ABDECKUNG GEÖFFNET. DIREKTE BESTRAHLUNG DER AUGEN VERMEIDEN. Laser mark of compliance Warning Laser Type lable 3.6.
User Manual 3.
Mobile Computer MC 9090 3.8 WLAN / Bluetooth 3.8.1 Radio Modules ex The device contain approved radio module(s). These module(s) are identified below. ■ ■ 3.8.2 Symbol Modular RLAN radio card, Type(s): 21-21160 Symbol Bluetooth Terminal, Model: MC9090 Products equipped with Bluetooth® Wireless Technology This device contains the following Bluetooth Complimentary subsystems: ■ BT ID:B01825 ■ BT ID:B02413 The use of wireless devices may be forbidden or restricted.
User Manual Mobile Computer MC 9090 ex If using WLAN in accordance with IEEE802.11b (2.4 GHz) in the European Economic Area the following restrictions must be observed: The maximum radiated transmitting power of 100 mW EIRP in a frequency range of 2,400 to 2,4835 GHz France Devices are subject to a restricted frequency range of 2,4465 to 2,4835 GHz. Only certain channels are available (only channels 10, 11 , 12 and 13).
Mobile Computer MC 9090 4. Commissioning 4.1 Mobile Computer ex To ensure that the devices function perfectly and have a long service life, they must be handled carefully. Chapter 5 "Handling" explains how to avoid inappropriate handling (e.g. by letting fall, damaging with objects). Use the devices only if they are in a perfect technical condition. Before using the Mobile Computer for the first time, charge the main battery (as described in Chapter 4.3 "Battery"). 4.
User Manual 4.3 Mobile Computer MC 9090 ex Battery Only battery type 17-A1Z0-0002 with 7,4 V / 2200 mAh can be used in the hazardous zone and may therefore be changed or replaced. The Mobile Computer can be charged using a cradle or a charging station. Note that battery type 17-A1Z0-0002 with 7.4 V/2200 mAh may only be charged outside the hazardous zone. Use only accessories approved by BARTEC. Do not attempt to charge damp/wet Mobile Computers or batteries.
Mobile Computer MC 9090 4.3.3 ex Power supply Use only the power packs approved by BARTEC/Motorola (50-14000-148, 12 Vdc and at least 3,33 A). The power pack is certified in accordance with EN60950-1 and has SELV outputs. The use of other power packs invalidates the permits granted for these devices and can be dangerous. 4.3.4 Charging the Battery Make sure that the accessory part used for charging the battery is connected to a suitable power source.
User Manual 4.4 Mobile Computer MC 9090 ex Installing Battery Do not remove the battery during the first 15 hours of operation. There is a risk of losing data if the battery is removed. Sliding the battery into the mobile computer as shown in Figure Ensure the battery is fully inserted. Two audible clicks can be heard as the battery is fully inserted. A partially inserted battery may result in unintentional data loss.
Mobile Computer MC 9090 5. ex Handling Make sure that the Mobile Computer is set down on a stable supporting surface. Avoid putting it down on places such as e.g. tables, trolleys, stands or holders if they are not stable. 5.1 Mobile Computer MC 9090ex-K In this position the device cannot be protected against damage. The display can be damaged by objects lying on the supporting surface. This is not a stable position for the device. It can topple over or fall down.
User Manual 5.2 Mobile Computer MC 9090 Mobile Computer MC 9090ex-G In this position the device cannot be protected against damage. The scanner window can be damaged by objects lying on the supporting surface. In this this position the device cannot be protected against damage. The display can be damaged by objects lying on the supporting surface.
Mobile Computer MC 9090 5.3 Battery 5.3.1 Battery Informationen ex BARTEC rechargeable battery packs (type 17-A1Z0-0002) are designed and constructed to the highest standards within the industry. However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and falls from heights.
User Manual Mobile Computer MC 9090 ex Charging the Battery in the Mobile Computer Care must be taken that the devices to be charged are inserted into the charging station in the direction of the arrow. The Mobile Computer starts the charging process automatically. The yellow charging LED in the LED display bar lights up to indicate the charging status. Information on the charging displays can be found in Chapter 4.3.4 "Charging the Battery" under "LED Status".
Mobile Computer MC 9090 5.3.3 ex Tips on Optimising the Operating Time ■ ■ ■ ■ ■ Leave the mobile computer connected to AC power at all times when not in use. Set the mobile computer to turn off after a short period of non-use. Set the display and keyboard backlight to turn off after a short period of non-use. Turn off all wireless radio activity when not in use. Power off the mobile computer when charging to charge at a faster rate. 5.4 Software Settings 5.4.
User Manual 5.4.2 Mobile Computer MC 9090 ex Changing the Display Backlight Settings To change the display backlight settings in order to conserve more battery power: 5.4.3 ¨ Tap Start ¨ Select the On battery power: Disable backlight if not used for: check box and select a value from the drop-down list box. (In battery operation: turn off the backlight if … inactive), and select a value in the dropdown list. ¨ Tap the Brightness tab.
Mobile Computer MC 9090 5.4.5 ex Waking the Mobile Computer The wakeup conditions define what actions wakeup the mobile computer. These settings are configurable and the factory default settings shown in the following Table are subject to change/update. Table Wakeup Conditions (Default Settings) Status Description Power Off When the mobile computer is set to the suspend mode by pressing Power, these actions wake the mobile computer. Conditions for Wakeup 1. Power button is pressed. 2.
User Manual Mobile Computer MC 9090 5.5 Mobile Computer booten 5.5.1 Windows Mobile 5.0 Devices ex If the functions stop working when you are using the Mobile Computer, it is recommendable to REBOOT the device. There are two reset functions, warm boot and cold boot. A warm boot restarts the mobile computer and closes all running programs. A cold boot also restarts the mobile computer and closes all running programs but also resets the Real-Time-Clock (RTC).
Mobile Computer MC 9090 ex To perform a cold boot on a MC9090-G: 1. Press the primary battery release on the mobile computer to partially eject the battery from the mobile computer. 2. On an MC9090-G, while the battery is partially released, simultaneously press and release the trigger and the Power button. 3. Only the battery may be pushed into the battery compartment in the Mobile Computer. One audible click can be heard as the battery is fully inserted. 4. The mobile computer initializes.
User Manual Mobile Computer MC 9090 6. Additional components 6.1 Keypad and CD Card 6.1.1 Keypad with blue overlay Options Order number 28 keys 05-0080-0388 43 keys 05-0080-0389 53 keys 05-0080-0390 53 keys keypad coding for VT Emulation 05-0080-0391 53 keys keypad coding for 3270 Emulation 05-0080-0392 53 keys keypad coding for 5250 Emulation 05-0080-0393 ex When replacing the keypad, follow the instructions in Chapter 6.1.3 "Removing/changing the Keypad" 6.1.
Mobile Computer MC 9090 6.1.3 ex Removing/Changing the Keypad The keypad and SD card may only be replaced outside the hazardous area! 1. Turn off the MC 9090ex. 2. Remove the battery (see Chapter 5.3.2 "Charging Processes"). 3. Take out the screws at the top edge of the keypad. Fig. 1: Removing the keypad 4. Pull the keypad downwards in the direction of the arrow and then forwards to take it out of the MC 9090ex. 5. Check that the contacts and seals are clean and in good condition. 6.
User Manual 7. Mobile Computer MC 9090 ex Snap on the keypad in the direction of the arrow (see fig. 4) and push it upwards until the boreholes for the screws are over the threaded sleeves. Fig. 4: Changing the keypad 8. Check that the keypad is mounted correctly. Figure 5: Keypad mounted incorrectly 9. Figure 6: Keypad mounted correctly Push the keypad in the direction of the arrow (see fig. 6) until the boreholes on the keypad are positioned over the threaded holes on the enclosure.
Mobile Computer MC 9090 6.1.4 ex Inserting/replacing the SD card The hardware status of the SD cards is specified in the test certificate. Accordingly only the SD cards with the order number 17-28BE-F006/000x are to be used. 1. Take off the keypad as instructed in Chapter 6.1.3; Repeat Steps 1 - 4. SD card slot Figure 7: MC 9090ex without keypad 2. Lift up the card holder, insert the SD card under the clamp in the designated direction and position correctly.
User Manual 6.2 Stylus 6.2.1 Stylus for MC 9090ex-K Mobile Computer MC 9090 Order number for stylus ( yellow): 3-pack 3-pack 10-pack 10-pack Stylus with holder 6.2.2 3-pack 3-pack 50-pack 50-pack Stylus for MC 9090ex-G Order number for stylus (grey): 10-pack 10-pack 50-pack 50-pack Stylus with holder 6.3 3-pack 3-pack 50-pack 50-pack Headset or other audio devices Adjust the volume. Turn down the volume before using the headphones or other audio devices.
Mobile Computer MC 9090 7. Maintenance 7.1 Care of the Battery ex The battery should be completely charged before it is used for the first time. Note that the maximum capacity of the battery is not attained until after approx. 5 - 6 charging and discharging cycles. As the battery power diminishes over the course of time, the batteries should be completely discharged and recharged every now and then in order to retain the full capacity.
User Manual Mobile Computer MC 9090 8. Additional information 8.1 Links http://www.bartec-group.com BARTEC Homepage http://www.symbol.com Motorola Homepage http://www.symbol.com/ The Motorola site for the MC 9000 ¨ ¨ ¨ ¨ http://www.symbol.com/ Support and Resources Product Manuals Mobile Computers MC 9090 WM The Motorola site for the MC 9000 ¨ ¨ ¨ ¨ Products and Services Mobile Computers Industrial Class MC 9000 http://www.symbol.
Mobile Computer MC 9090 8.
User Manual Mobile Computer MC 9090 Order number Motorola Order number BARTEC - 05-0079-0018 CRD9000-1001SR 03-9915-0003 Power pack 50-14000-148R 03-9911-0015 RS232 cable (Cradle <-> PC) 25-63852-01R 03-9919-0004 USB cable (Cradle <-> PC) 25-64396-01R 03-9919-0008 Cold device connector (DE) 50-16000-220R 03-9609-0013 - 05-0079-0028 CRD9000-4001ER 03-9849-0026 Power pack 50-14001-004R 03-9911-0021 DC cable (Power pack <-> 4 Slot Cradle) 50-16002-029R 03-9919-0010 Cold device con
Mobile Computer MC 9090 8.
User Manual Mobile Computer MC 9090 17-A129-0K 0/HJ FA6 0 Example: A 1D Standard Range Scan Engine (SE950) K 2D Imager (SE1440) A 28 Key Tastatur (mobile phone keypad) F 43 Key Tastatur keypad (with function keys F1 – F12 in direct access) E 53 Key Tastatur (alphanumeric keypad) G 53 Key Tastatur with printing for ür VT Emulation (the software is not installed on the device) H 53 Key Tastatur with printing for 3270 Emulation (the software is not installed on the device) J 53 Key Tastatur
Mobile Computer MC 9090 9. ex Transport and shipment Important note concerning transport and shipping ! Sensitive Devices ! It is absolutely necessary to deliver the equipment in the original packaging in order to avoid damage to the equipment.
Mobile Computer MC 9090 10.
Mobile Computer MC 9090 ex Page 59
