RFID Snap On Modul Content Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 User Manual RFID Snap On Module RFID LF Reader RFID HF Reader RFID UHF (EU) Reader RFID UHF (US) Reader Document no. B1-A2Z0-7M0003 Revision 1 / June, 20th 2013 Reservation: Technical data subject to change without notice. Changes, errors and misprints may not be used as a basis for any claim for damages.
RFID Snap On Modul Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 1. Basic Safety Instructions 3 1.1 Notes on this manual ..................................................................................................... 3 2. Warnings for Use of Wireless Devices 4 2.1 Radio Frequency Interference Requirements - FCC ..................................................... 4 2.2 Radio Frequency Interference Requirements - Canada ................................................ 5 3.
RFID Snap On Modul Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 1. Basic Safety Instructions 1.1 Notes on this manual Product description Please read carefully before commissioning the devices.. The user manual is a constituent part of the product. It must be kept in the direct vicinity of the device and accessible at all times to installation, operating and maintenance personnel.
RFID Snap On Modul Product description Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 2.2 Radio Frequency Interference Requirements - Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Radio Transmitters This device complies with RSS 210 of Industry & Science Canada.
RFID Snap On Modul Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 Product description 3. Product Description Available for: Industrial Environment ATEX/IECEx Zone 2 and Zone 22 UL Class I, II, III Division 2 3.1 Operation 3.1.1 Exclusive Purpose The RFID Snap On Module is a accessory. The modules read and write data on RFID tags in industrial and hazardous locations. It is used exclusively in combination with operating devices which satisfy the requirements for overvoltage category I.
RFID Snap On Modul Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 3.1.2 Product description Site of Operation The RFID Snap On Module type G7-A0Z0-…., has been modified for use in following environment: Industrial environment outside of hazardous location The RFID Snap On Module type G7-A0Z0-…., may not be used in locations of: Hazardous location The RFID Snap On Module type B7-A2Z0-….
RFID Snap On Modul Product description Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 4. Technical Data 4.
RFID Snap On Modul Product description Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 4.2.2 4.2.
RFID Snap On Modul Product description Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 4.3 External Interface Pins on the connector: +++++ PIN 4.4 Description PIN Description 1 Ground 6 USB_DPin 2 Reserved 7 USB_D+ 3 5.4 VDC 8 USB_Vbus 4 Cradle_Detect 9 Reserved 5 Power Gnd 10 USB_ID Product Marking Type number Marking for ex proofed Version Marking for Industrial Version Type: B7-A2Z0-… Type: G7-A0Z0-….
RFID Snap On Modul Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 Product description 5. Commissioning and Operation DANGER Avoid electrostatic charge inside of hazardous location. There is a risk of fatal injury in an explosive atmosphere! Don’t dry clean or wipe. Wear suitable clothes and shoes. Don’t use rubber gloves. DANGER Inproper use is a risk for the explosion protection.
RFID Snap On Modul Product description Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 5.2 Composition Label location 6. Order Number 6.1 6.
RFID Snap On Modul Product description Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 7.
