DBL TPMS Hand Held Tool
FCC Class A Device ........................................................................................................... 3 Intended Usage.................................................................................................................... 3 Power Supply ...................................................................................................................... 3 DBL Operation.......................................................................................................
FCC Class A Device Class A Device Statement: (Section 15.105(a) of the FCC Rules) Note: This equipment has been tested and found to comply with the limits for a Class A digital service, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interface when the equipment is operated in a commercial environment.
DBL Operation Low Power Indicator The LED labeled POWER lights RED when the battery needs to be replaced. Using the DBL The process of using the DBL is one simple operation of holding the tool over the sensor and pressing the test button down. When the TEST button is pressed the green TPMS light will come on and stay a solid green color until a signal is received from the sensor in the wheel, or the cycle time ends.
Proper Positioning Ford model year 06 banded sensors To read the Ford model year 06 banded sensors the DBL must be placed directly over the sensor (as shown below) which 180 degrees from the valve stem. Picture 1 - Ford model year 06 Banded 1 Schrader valve stem sensors To read the Schrader 315MHz and 433MHz sensors, the DBL must be placed over the sensor (as shown below) which is connected the valve stem.
Additional Information Environmental Operating Temperature xx degrees to xxx degrees F / xx degrees to xxx degrees C Storage Temperature xx degrees to xxx degrees F / xx degrees to xxx degrees C Humidity xx% to xx% (non-condensing) Shock xx K G (at xx degrees F / xx degrees C) DBL Technical Brief ??????? Processor ??????? Ram ??????? Flash programmable memory LED spec? Loud Sounder Enclosure Constructed from _____________ injection molded polypropylene-alloy
