BARRETT 2050 HF SSB TRANSCEIVER Receiving a “Page call” “SM8” When a Page call is received an audible alarm is sounded, the mute (squelch) is opened and the display shows the following iced Page call Received #34 er 3136 8 ECLIPSE Fes FELL ME BS SOON AZ POSSIBLE The audible alarm will sound for thirty seconds and then time aut. To cancel the alarm before the time out period and to acknowledge the call, press PTT or any Key.
aE EARN SE Remote station operational status “Stat call” “Stat call” allows the operational status parameters of any Barrett transceiver fitted with seawall to be accessed. This status is sent from the cremate transceiver as a seawall with the status information embedded within the seawall structure.
AEP ERE GENS S15 Unshapely 6813 1240 Sk Des 357 Status Re sues CE tao set The status request is being transmitted Channel BES 1288 A Ore A gd Waiting for a Response Your station is waiting for the station you called to send back its “Status data” {which sounds fiche the remote station sending a Select to you) after which the following will be displayed, use the or |e keys to move through the pages: Barrett 2050 Software Version 1.
BARRETT 2050 HF SSB TRANSCEIVER Person to person(s) secure call This facility allows a secure voice connection to be made between two or more stations. Protein the protected menu “Audio Setting” section, scrambler must be enabled in the “Scrambler section” and in the "Scrambler code” section a 4 digit number entered, For security purposes this code must be the same as the code set in the station you wish to call. select the channel you want to set up the secure fink on.
GARRETT 2050 HF SSB TRANSCEIVER Tuning the receiver The 2050 transceiver can be used as a unable receiver. The receiver can be raid from 500 Kz to 30 MHz. In steps ranging from MHz Press the 9h_4) key to enter the tuning receiver mode: Channel B15 fe i Receiver Ease x BERRIES To tune the receiver move the cursor over the digit representing the frequency increment required in the receiver frequency display you wish to tune using either the ar ory keys. then use. tune up in frequency wv MN.
BEGAN ESE RRR == Scanning with the unable receiver The receiver can scan any range of frequencies from 500 KHz to 30 MHz with a frequency step down to 10 Hz.
GARRETT 2050 HF §8B TRANSCEIVER] Using the Scroll keys select step increment required in Hz (Steps available 100Hz (0.1kHz), 250Hz (kHz, 2500Hz (2.5kHz) {example shown 2500Hz) fen press the v key Using the Scroll keys select step speed in milliseconds. (steps available 100ms, 250ms, 500ms, 1000ms (example shown 250ms) then press the os key Start receiver scanning To start receiver scanning, enter the tuning receiver mode, then.
GARRETT 2050 HF SSB TRANSCEIVER Menu functions Menus The menu is divided info two sections, the “Standard Menu” and the “Protected Menu”. Both sections are used to set or display transceiver parameters. The “Standard Menu” is available directly to operators as no critical operation parameters can be changed in this section, The “Protected Menu” has same critical parameters and needs the operator to press the menu key for two seconds to enter it.
ERE SEN Standard Menu Identification identification fs Use the and wry keys to scroll back and forth through the identification pages: Software Version: 100 BSP Version 1.00 Cove Version 1.
Display Options Back light Level ee Stand ed en intimates | | erm sepia son ] Ea Back light Level wv | High A, Display Options Se — Allows the back light level on the LCD display to be adjusted to one of three viewing Medium or Low.
BARRETT 2050 HF S8B TRANSCEIVER Back light Timeout ree Sta dad Menes [Owen {oy Deter ~ Grit TE Ps Display Options Fightback Timeout hd Start Timeout Allows the back light timeout time fo be set sa the fightback stays on for a short time from the last key press, for a long time from the last key press or so that the back light is permanently on or aff. Note:Having the back light off reduces the transceiver's power consumption.
Call History Whenever a Seawall, Tel call, All call, Group call, Sub group call, Page call, Stat call GPS or Emergency call is received or transliterated its details are had ib a first in first out call history buffer. Received calls that have not been viewed before are held in a section called "New Calls”, received calls that have been viewed are held for future viewing in the “Inbox” all transmitted calls are stored in the “Outbox”. Each history buffer can store up to 30 entries.
Outbox This section lists ail types of Seawalls that have been transmitted £2 History gm fist tox Consistory Guthrie ~ 2d Recorded r—— | habit Record HY Transmitted (200 1st an Eater for rems details Navigation when in the "New calls”, “Inbox” and “Outbox” is always the same as shown in the “New Calls” paraplegia beginner 533rd Lemme § | ssn] History Hew Calls > Cain History Sw Deceived Either Use the Scroll keys to select the required record: —— 1: 1234 record lS Type Sheba Evader: 1200 12 Jan Enter for mo
BARRETT 2050 HF SSB TRANSCEIVER Received: 1200 1st fon Enter bu Mara detail befits: 31 om vi 1.
GARRETT 2050 HF SSB TRANSCEIVER Address books Seawall ID Book — add a new entry SANA Mannheim || smn 38 225 E30 mmm eS Select ID Book 2@ Entries A Address Backs Sy es 0 Bik commonsense A fad Eatery Sw Creon) then press the key er helical Bim | Home § Se deal ir input Mme: Seismically 1B: Uppercase Mode Ii 6 then press 237
BRETT 2050 HF 8SB TRANCE! Seawall ID Book ~ erase an entry mmm SEE Hmm dds Address Books Seawall ID Book > hd 20 Entries mm | re mre Sd 5140 Bik Pe Search Entries ps foal Fo i S— Name: [ENTER Sefcafti:0547 Salad i J Crass Enter to ss use the Scroll keys to select the entry you want to erase press we >] key for more than two seconds sma 35 EAP use the Scroll keys select “Yes” JE — fire uu sire you want tn erase TBH EASE tes Came) press the key 68 of 237
GARRETT 2050 HF 8SB TRANSCEIVER Entry phrased Phone back add a new entry dress Boos AA we Phone Book A Address Books hd O53 Entries Fae Fh Heine: 8 3 Pippin Mae of Phone Book Entry Tuna press the Eo key if uppercase required Phone Named Pa uppercase Mode Input Fame of Phone Bonk Entry enter the name 10 be associated with telephone number Heine: bil Pix: Input ame of Thane Book Entry then press the cw key 69 of 237
GARRETT 2050 HF SSB TRANSCEIVER input Telephone number enter the telephone number using the numeric keys (up to 16 digits) hot 2 Haste Bil Ph G06 150TH inp ab then press 00 wine Book; How trig ——
aa ESR EEE ERR EE Phone book edit an entry sno 5380 17 A Address Hooks hd mmm 30 055 BSD Sra Thane Book ”: 95 Entries mere Coma SA Search Entries Sy meme; Camel Pa SEES 23 Press Enter bo edit Disturber Either use the Scroll keys to sell though the phone book ta find the entry you want 1o edit mm BGT Bic fame Though R04 1TO0 Press Enter to edit Launderette Or enter the first letter of the name you are looking for using the Alpha keys, for example, looking for the name Patrick: Key inp’ using alpha keys, then
GARRETT 2050 HF SSB TRANSCEIVER ares) row to edit the telephone number press oS Key Mae: Patti Phi E Input Telephone Mer enter the new telephone number using the numeric keys {up to 16 digits): Hams: Patrick Ph 061555068 on moan D012 Gif rr Entry etiolated #8) Fhe Book: Home TEASES Bh: DUG RESILIENT Bries Enter to edit Tel number Phone book erasing an entry Cartridge {nme || omen £55 tk mmm: A Address Books Phone Buck hd 85 Entries
Here Be deterrence sear Ea Pht: Bowman | Ham me SIRES Ph 0051505550886 Ere: to edit Abstainer select the entry you want to tease using the Scroll keys.
GARRETT 2050 HF SSB TRANSCEIVER IR Enable mn S061 EU a Penalize ~ Gores) Press the key fo enable the IR facility: A: Enable Infra Red Enabled The R facility will remain enabled ready to fink to an IR equipped PC or laptop that is loaded with the Barrett 2000 series programming system for a period of 5 minuses. After this time, unless an IR link has been established, the IR is again disabled. See the "Programming section” of this manual for more details.
BARRETT 2050 HF SSB TRANSCEIVER Audio Scrambler in SAAR FS A Audio Ser amber No When using the internally lifted audio scrambler accessory PCB that provides backwards, compatibility to the 900 series audio inversion scrambler (BCA20031) or the Transcript scrambler (BCA20034), the scramble code is sat using this option Ali stations using the Sc ambler require the same scrambler code to be entered: amble As Ge rambler Code — Code 1 The code can be selected between 1 and 16: or amber Cote A Lode 16 wr press th
BARTER 0 HF 888 TRANSCEIVER 2040 Antenna Select (available when 2050 deployed in 2040 man pack adapter) ene Si Fe msm | merman 340 Haber oy A 204C antenna , 2040 infernal Select vy 56 Hie ne Je This section allows the selection of the antenna type to be used with the 2040 man pack, When an UN-tuned antenna such as the whip or a long-wire is to be used is selected. This enables the automatic antenna tuner. 3 50 Ohm broadband antenna or a tuned dipole is to be used select "50 Ohm”.
EE EE SER LE EE Protected Menu Refer page 57 for details on how to access the protected menu.
Transmit “over beep” fainthearted General Tx Over Beep wo Nr Disabled ee When selected the 2050 transceiver transmits a short tone when the PTT is released. it provides an audible indication to the operator at the remote station that the focal station has stopped transmitting. Use the Scroll keys to select the setting required (example “Tx Over Beep enabled" )press the Vv. key Ts Ever Fillip: Denatured Selected TT eh.
IRE ERE HY Transmit timeout -. a Transmit Timeout wv [Ee A General When this feature is enabled the 2050 transceiver will disable the transmitter if the PTT {push fo talk button on the microphone} is held on for more than the Hume Bit set below Le. if the microphone is inadvertently jammed under a seat. Releasing the PTT will reset the transmitter.
GARRETT 2050 HF SSB TRANSCEIVER Delete a label Enter edit mode as shown above and select the label you then press Chan Entry of Updated NY EES Hod Clear b ek fire: to dit iron sure was want lo e25ze 08 by € discharged) Bre you sure wou ward do at ace Riv.
82 of 237 Add an Entry wen B13 mmr Gent id= A General A [ee anti stl Channelization z 07 Entries Sn Add Entry v Caves) press the key Channel lama | abet § treat New Channel Label type in a new label using the Alpha keys:-. mmm satiated | bait Label HUNCH Gentleness In pat New Channel Laval then press the co kay.
SERER EA EE GS Betting the Clock General Hillock w | pies press the es key Use the Croft keys and as shown on the screen to set the current time for example 13:15 (1:15 PM) Set Chk: 13545 te set time ree curse When time is sel press the Sil Clack mmm Time 4 Set 01237
BARRETT 2050 HF SSB Tl Protracted Forest ~~ era sedate or | I lst Jar press the & key 1 Jan 2008 se Songs to set date Use gd fens to mov curse RECEIVER Setting the Date .
GARRETT 2050 HF SSB TRANSCEIVER BLT.E. Test Protected ent oA A General BATE. Test v hd Untested This section runs the transceiver's Built in Test Equipment tests. The transceiver checks vital transceiver functions and reports the results as shown elope. Testing ols Testing ARCS S51 Testing Hols Bak then press the V, key to continue Ge ems Ea BLYTHE Test “ Passed Con) press the key to repeat the test or press the key fo finish.
GARRETT 2050 HF SSR TRANSCEIVER Option installation CE Option installation ~~ ~ Heo Options Enabled I — sss Options are installed in the Barrett 2050 transceiver by entering a PIN number supplied by the manufacturer. This PIN number is related to the electronic serial number of the transceiver. A different PIN number is provide depending on the aphelion or combination of options required to be fitted. Most options are fitted in the factory before dispatch.
& R Hopping PIN number entry rr msn EFS Elmo Hopping Pin = sense n, General ha Using the numeric keypad enter an 8 digit hopping security code. HEP ping Pin Enter Hopping Pin BE then press the Frequenter Hopping =] Pin _ Beeped of _| Note:Refer to the “Frequency Hopping” section of this manual for details of PIN entry and Frequency Hopping in general ees.
ANS = Secure Call Code Protect hmm mm airs 2): — Pat Secure Cali Code v A General When using the person to person voice scrambler both stations require the same scrambler code to be entered: mn Enter Secularize Ate em Using the numeric key pad enter a four digit number: Sour 2 Call Intimate Enter Secure tall Code 18348 Creon then press the key are Lal Co lemme Code i Programmed —
BARRETT 2050 HF 888 TRANSCEIVER Upload Pack Price rah A, .
BARRETT 2050 HF 888 TRANSCEIVER Scan tables Adding channels to 2 scan table Tats 1“ Sean Tables Cantabile ~ Empty ee mre meme 34 | sil SCT 2bfeSmmrmene A Rad inquiry hd Use the Scroll keys to select the channel you wish to adaptability Tasman | Channel HIS Foxtrot 01 Frequency: 1000) Label: Public Select Thane Scan ‘When the channel required is displayed press the meres 5:37) T 3b Somme Hip ; Energy 90 of 237 wes PT a omy
BARRETT 2050 HF SSB TRANSCEIVER! Editing channels in a Scan table Either an Tale SI —— Sean Table 1 A, Sean Tables ~ 82 Entries we Siam Tami A Search Entries 6 Table Aniakchak 0003 Ante EHS frequency: kz Laban Public Enter 1a Edit Can Table Ruben Use the Scrumhalf keys to select the channel you wish to immediateness i3 Tte Chanson 0005 Ante FBS Frequency: 5000.
BARRETT 2050 HF SSB TRANSCEIVER ri Table 1 Channel 0003 Entrap HS Frequency: HI skiff Lab: Public Then press the os key to edit the channel number Use the Scroll keys to select the new channel for the scan table slot meme Tbe Annette [HES Entry. 01 Cones) press the / key to enter the new somersetting tt Channel to Scan Entry Edited Erasing entries in a scan table Select the scan table and channel soot you want to remove using the steps above: msm’ T DEE Tommie Chantey 002 Untie GHC Frequency: 2000.
a ETT 2050 HF 8SB TRANSCEIVER Use the Scroll keys to select "Yes" when you are sure you want 10 erase the entryway 36 Ei oarswomen Fre oun sure you want fo ar. eardrum 81 {Channel (R37 Vests then press the V key EE Entry Erased mime ms een Note:All channels are displayed in numerical order within the scan table with respect to the entry number, there are a maximum of 30 entries in pate table. cm.
94 of 237 Lo ha, Chan Label ~~ Scan Table 18 As, Sean Table 1 2 Entries Use the key to clear the old label: emt 5240 Table L slaloms u Percussion Had using the alphanumeric keypad enter the new labeled) then press the oer bic Sa Tabla Laborer | AWE Hit work@ key
GARRETT 2050 HF SSB TRANSCEIVER Scan settings Scan Rate me Br hrm || et S25 mem | as Scan Rats ~ ~ Sun Settings Su Fums Oms Sw Selects the scan rate applicable fo non-seawall scan channels, delectable between 300mS and § seconds per channel. Use the Scroll keys to select the scan resume time required {example 700mS mere 36.30, i iin Pea T00ms wv When the setting required is selected press th rear mas 3.
GARRETT 2050 HF SSB TRANSCEIVER Scan Dwell Sean Deli o sec mtn 5 475 Milan {sex Defects the length of time the transceiver dwells(waits) on a channel after scan has been sapped by signal strength level (if signal strength level mute is set) or voice activity {f audio mute is set). The dwell time an be set farm 1 to 10 seconds. Use the Scroll keys to select the scan dwell time required (example 5 seconds) 56.503 Tin Secs ha Um mm Corer) When the setting required is selected press the.
GARRETT 2050 HF SSB TRANSCEIVER Scan Resume Time Cherished: meres 35. 350 SEEINGS “ . A Sean Settings Scan Resume Time hd oft This section sis the time period after which the Barrett 2050 transceiver will automatically resume scanning from the last operation fe. key press or PTT. The scan resume time period can be set between 1 and 30 minutes or it can be disabled.
BARRETT 20560 HF SSB TRANSCEIVER Scan table select [can Star] = Select > Scan Table hd This section selects the Scan table to be used when the transceiver is put in scar, or if enabled, when span resume scours. There are 8 scan tables, Sean Stings Note: When scrolling through the scan tables, before selection, only those with channels entered will be displayed. Note: Channels can be added, removed and edited and scan tables named in the “Sean table” section.
BARRETT 2050 HF SSB TRANS Mute Settings Syllabic Mute Sensitivity 513 5wmmrrmm [E—— lie Suffice Tate sensitivity “Sli te Sensitivity | ws Low No The sensitivity or “hardness of the syllabic mute (squelch) is set by this section. The mute can be set between low, medium and high sensitivity to voice activity on 2 channel.
