Modular Video Wall System with Push-to-Pop-out and Anti-Theft Features VW401P User’s Manual
ATTENTION! Please read the following. EN WARNING! Disregarding the safety and assembly instructions may result in the falling of and/ or damage to your electrical appliance. Opening the package represents your undertaking to closely read and follow the instructions. This mount is not intended for use in public places. For Safety Instructions, warranty and further information, go to: www.barkanmounts.
SR UPOZORNĚNÍ! Nedodržení bezpečnostních a montážních pokynů, může způsobit pád a následné poškození Vašeho elektronického přístroje. Po rozbalení, si pozorně přečtěte montážní návod a ve vlastním zájmu jej dodržte. Tento držák není určeno pro použití na veřejných místech. Pro bezpečnostní pokyny a pro více informací se podívejte na: www.barkanmounts.
ES ! RU Caution - This mount is intended for use only with the maximum weight as indicated. Using heavier products might cause injury. Atención DA Attention EL Este soporte debe ser utilizado solo con el máximo peso especificado. Utilizarlo con productos de mayor peso puede causar daños. FR Utilisez ce support en ne depassant pas le poids maximum indiqué. L’utilisation de produits plus lourds pourrait causer des dégats.
EN ! Do not install on walls and ceilings made of: gypsum board, drywall, light processed blocks, silicate boards/bricks, a damp wall, weak or very old blocks or wooden panel! For installation on gypsum or light processed blocks please consult with an authorized installer or appropriate building specialist to install the product.
VW401P Contents Weight Limit. ............................................................................................................................................................. 2 Warning Statements. ................................................................................................................................................ 2 Installation Tools. ......................................................................................................................................
VW401P Installation Tools The following tools may be required depending on your installation.
VW401P Parts List (cont’d) Mounting Hardware M5 x 16mm Screw (Qty 4) -A 13x8.2x5 Spacer (Qty 8) M5 x 30mm Screw (Qty 4) -B 5mm Allen Key (Qty 1) -J M6 x 16mm Screw -C (Qty 4) 16x8.2x1.5 Metal washer (Qty 6) M6 x 30mm Screw -D (Qty 4) 8*70 Lag Bolt (Qty 6) -L Anchor (Qty 6) -M M8 x 16mm Screw -E (Qty 4) M8 x 15mm Screw -O (Qty 4) M8 x 50mm Screw -G (Qty 4) 16x6.2x1.5 Metal washer (Qty 4) -K 13x8.
VW401P Features The VW401P Video Wall Pop-Out Module is a customizable video wall mounting system featuring multi-monitor stacking, open design, and scissor mount extension. It has an extending scissor mount for easy Post-Installation Adjustments Leveling, tilt and in-out adjustment knobs make it easier than Kickstand for a seamless video wall. the kickstand for easy maintenance. Spring Lock Simply push the mounting rails in to lock or unlock the mount from the closed position.
VW401P Installation Introduction Directional Mounting Arrow The Directional Mounting Arrow stamped into the VW401P mount indicates which edge is the top. Mounting Safety Two people are recommended to install the mount. 1)Mounting to Wooden Studs Step 1 Two people are recommended for this step; one person to level the mount and another person to mark the wall stud location. 1) Place the mount against the wall in the desired viewing location.
VW401P Installation 2)Mounting to Solid Concrete/Masonry Step 1 Two people are recommended for this step; one person to level the mount and another person to mark the wall stud location. 1) Place the mount against the wall in the desired viewing location. 2) Adjust the mount to align the mount slots in the mount with the center of the wall studs. 3) Level the mount. 4) Use a pencil to mark the upper right mounting location along the center of the wall stud.
VW401P Installing the Mounting Brackets 1) cribed, draw a horizontal line (the use of a laser leveller may help). - Alignment line 2) you can place the second bracket by tape measure proceed in this way with the other brackets.
VW401P Installing the Mounting Bracket (cont’d) VESA（Horizontal）:100*100~400*400 1) 2) A+H/C+H/E/G H B+H/D+H/F/G H I/N VESA:500*400~600*400 1) 2) O B+H/D+H/F/G H I/N VESA（Vertical）:200*600~400*600 2) 1) B+H/D+H/F/G O H I/N User’s Manual Page 09
VW401P Mounting the Flat-Panel Attaching the Flat-Panel to the Mount Mounting bracket adjustments are factory pre-set (see Note). This section requires two people. Note: These registers must align prior to installation.They are factory set. Check to determine proper alignment that top and bottom hooks of both mounting brackets are securely seated on the upper and lower mounting rails of the wall panel. 1) mounting rails on the wall panel. 2) the wall.
VW401P vvvvv Move Inward PUSH Move outward PUSH +/- (Z) +/- (x) +/- (Y) +/- (Z) Page 12 +/- (Y) LOCK User’s Manual
VW401P Post-Installation Adjustments Z adjustments +/-X adjustments +/-Z Y X adjustments +/-Y screen adjustments +/-Z Raise slightly the bottom of screen before adjust Maintenance and Servicing 1) Push evenly in the front of the VW401P to release the single latch spring lock (Figure 1). 2) Slowly pull the front of the VW401P to extend the scissor arms (Figure 2). 3) Loosen the locking safety screws on both mounting brackets. 4) kickstands against the bottom of the mount (Figures 2 & 3).
