Page 1 Long Premium TV Wall Mount Tilt Swivel For more information: barkanmounts.com BM343LP-MAN-ONL-06_2203 If you are satisfied with the product, please give us a 5 stars rating on the website you bought it from. If you are not satisfied please contact us at https://www.barkanmounts.com/support and we will solve the problem for you. TV Size 13”-65” 33cm-165cm TV Weight US EU 80lbs 36kg CAUTION This Mount is intended for use only with the maximum weight indicated.
CAUTION! WGP-BASIC-BNG-2202-Online You are obligated to read the safety and assembly instructions! Disregarding them may lead to injury and to the falling of the electrical appliance. EN WARNING! Barkan does not take responsibility for the installation. Disregarding the safety and assembly instructions may result in the falling of, and/ or damage to your electrical appliance. Opening the package represents your undertaking to closely read and follow the instructions.
IT ATTENZIONE! Barkan Mounts Ltd. non offr e garanzie per l‘installazione. Ignorare le istruzioni di sicurezza ed assemblaggio potrebbe provocare la caduta e/o il danneggiamento del vostro apparecchio elettrico. Nel momento in cui si apre la confezione si devono leggere e seguire tentamente le istruzioni. Quando il prodotto viene installato in luoghi pubblici, le persone responsabili in tali luoghi devono assicurarsi che venga utilizzato secondo le istruzioni.
CAUTION! You are obligated to read the safety and assembly instructions! Disregarding them may lead to injury and to the falling of the electrical appliance. EN The anchor must be sunk at least 10 mm (3/8”) into the plaster coating ES NL El tarugo debe penetrar al menos 10 mm (3/8”) en el yeso. Het anker moet minimaal 10 mm (3/8”) in de gipslaag worden gezonken. FR DA Le crochet doit être introduit d’au moins 10mm (3/8“) dans la couche de plâtre.
EN Please ask your installer to provide a warranty for the installations of the product. Installation of this product is only authorized on non-moving building walls and ceilings. The included hardware is not suitable for installation on walls and ceilings made of: gypsum board, drywall, light processed blocks, silicate boards/bricks, a damp wall, weak or very old blocks or wooden panel! ES Solicite a su instalador que proporcione una garantía para las instalaciones del producto.
Page 2 Included Parts not to scale B A Bracket x4 Wall Plate Plastic Cover x3 Y2 Z9 W2 W1 x1 x2 x4 x6 Y1 Drilling Template Z8 Z7 Z10 D Adaptor x4 x1 x1 Z6 C TV Plate x2 W3 x3 x3 Wall Plate Plastic Cover x1 x1 L L mm inch 4 20 3ൗ 4 4 Z2 6 16 5ൗ 8 4 Z3 6 25 1 4 Z4 8 25 1 4 Z5 8 45 13ൗ4 4 # M Z1 Required Tools 7/16” 11 mm No.
Page 3 Connect the TV plate to the back of the TV. Wrong Right Purchase longer screws. Use the spacers (Z7) in order to adjust the screws length inside the TV. Continue according to your TV mounting hole pattern. 75 – 100mm 200 – 400mm 1 1b 1a 1a Page 4 75x75 mm up to 100x100 mm hole pattern.
1b Page 4 Hole pattern 100x200 mm up to 400x400 mm: Disassemble the screws, connect the 4 Adaptors to the TV Plate and reassemble the screws.
Page 5 Position the Adaptors according to your TV’s hole pattern. Max. 400mm 200mm 400mm TV 200mm 200mm Max. 400mm TV For more positioning options turn to page 10. Connect the TV Plate with the Adaptors to the TV in all 4 connection holes.
Page 6 Install the Bracket on the Wall. Measure the distance between the location of the TV’s mounting holes’ center and the bottom of the TV, in order to set the required height of the TV. 5.3” / 13.6 cm 2 2.3” / 6cm 5.3” / 13.6 cm D HORIZONTAL CENTER LINE https://www.barkanmounts.com/faq 2.3” / 6cm Follow the steps according to your wall type. 3 4 Mark the holes on the wall according to the required height.
4a Make sure all holes are drilled inside the studs. Page 7 4b First use 1/4” \ 6mm drill bit. 1/4” \ 6mm 1 2.75” \ 70mm Afterwards use 3/8” \ 10mm drill bit. 2 3/8” \ 10mm 2.75” \ 70mm Drill with 5/32” \ 4mm drill bit. 5/32” \ 4mm 2.75” \ 70mm W2 3/8”/ 10 mm The anchor must be sunk at least 3/8"/10 mm into the plaster coating.
5 Page 8 Weight test Apply force on the upper part of the Bracket and make sure it is well connected. 80Lbs/ 36Kg 6 Assemble the Wall Plate Plastic Covers. 7 Place the plastic nut-housings (Z9), and then insert the two nuts (Z8). Y1 Z8 Z9 Y2 8 Connect the TV with the TV Plate to the Bracket Make sure that the TV Plate slots are positioned properly on 2 small beams (Bracket).
Page 9 9 Insert and tighten the screws from both sides to create friction for the tilt mechanism. Adjust the TV tilt angle carefully. FALL PROOF FALL PROOF Z6 Z2/Z3 10 Disconnect the Cable Management. 11 Place the TV cables in the Cable Management covers. CABLE MANAGEMENT 12 Reconnect the Cable Management covers to the mount. 13 Level the TV.
Page 10