Page 1 TV Ceiling Mount Height adjustment 16.1”-38” 41-97 cm Black Tilt Black & White Swivel Download Assembly Instructions with Text For more information: barkanmounts.com 3500-MAN-ONL-2212 If you are satisfied with the product, please give us a 5 stars rating on the website you bought it from. If you are not satisfied please contact us at https://www.barkanmounts.com/support and we will solve the problem for you.
CAUTION! WGP-BASIC-BNG-2202-Online You are obligated to read the safety and assembly instructions! Disregarding them may lead to injury and to the falling of the electrical appliance. EN WARNING! Barkan does not take responsibility for the installation. Disregarding the safety and assembly instructions may result in the falling of, and/ or damage to your electrical appliance. Opening the package represents your undertaking to closely read and follow the instructions.
IT ATTENZIONE! Barkan Mounts Ltd. non offr e garanzie per l‘installazione. Ignorare le istruzioni di sicurezza ed assemblaggio potrebbe provocare la caduta e/o il danneggiamento del vostro apparecchio elettrico. Nel momento in cui si apre la confezione si devono leggere e seguire tentamente le istruzioni. Quando il prodotto viene installato in luoghi pubblici, le persone responsabili in tali luoghi devono assicurarsi che venga utilizzato secondo le istruzioni.
CAUTION! You are obligated to read the safety and assembly instructions! Disregarding them may lead to injury and to the falling of the electrical appliance. EN The anchor must be sunk at least 10 mm (3/8”) into the plaster coating ES NL El tarugo debe penetrar al menos 10 mm (3/8”) en el yeso. Het anker moet minimaal 10 mm (3/8”) in de gipslaag worden gezonken. FR DA Le crochet doit être introduit d’au moins 10mm (3/8“) dans la couche de plâtre.
EN Please ask your installer to provide a warranty for the installations of the product. Installation of this product is only authorized on non-moving building walls and ceilings. The included hardware is not suitable for installation on walls and ceilings made of: gypsum board, drywall, light processed blocks, silicate boards/bricks, a damp wall, weak or very old blocks or wooden panel! ES Solicite a su instalador que proporcione una garantía para las instalaciones del producto.
Page 2 Included Parts not to scale A C B x1 D E F x1 x1 x8 W1 x4 x4 x4 W3 x4 P1 Y2 Y1 x4 W2 x4 x1 Z8 Z7 Z6 G x4 x4 P3 P2 x2 x4 x2 L L mm inch 4 20 3ൗ 4 4 Z2 6 16 5ൗ 8 4 Z3 6 25 1 4 Z4 8 25 1 4 Z5 8 45 13ൗ4 4 # M Z1 Required Tools ⅜" \10 mm 1/4” 6 mm 7Τ 16 “ /11 mm 5/32” 4 mm No.
Connect the TV plate to the back of the TV Page 3 Wrong Right Purchase longer screws 200 – 600mm Continue according to your TV mounting hole pattern 75 – 200mm 1 Use the spacers (Z7) in order to adjust the screws length inside the TV 1b 1a 1a 75x75 mm – 100X100 mm hole pattern Z4/Z5 NO FORCE Z1/Z2/Z3 Z6 Z7 Optional 2
1b Page 4 Hole pattern 100x200 mm up to 400x400 mm: Disassemble the screws, connect the 4 Adaptors to the TV Plate and reassemble the screws.
Page 5 Position the Adaptors according to your TV’s hole pattern. Max. 400mm 200mm 400mm TV 200mm 200mm Max. 400mm TV For more positioning options turn to the last page. 1c Connect the TV Plate with the Adaptors to the TV in all 4 connection holes.
Page 1 Follow the steps according to your ceiling type 2 2a Make sure all holes are drilled inside the joist/ stud 2b Make sure there are no electrical/water lines in the ceiling before drilling and then drill according to the markings DANGER Mark the holes on the ceiling according to the required position 3a 3b D D Use a Stud Finder 4a 4b
4a Drill with 5/32” \ 4mm drill bit Page 7 First use 1/4” \ 6mm drill bit 4b A 2.75” \ 70mm 5/32” \ 4mm 2.75” \ 70mm 1/4” \ 6mm B 3/8” \ 10mm 2.75” \ 70mm 3/8”/ 10 mm UP W2 The anchor must be sunk at least 3/8“\10 mm into the plaster coating A A B B D 2 x 360° D4 x 360° 7/16” \ 11mm A UP D A W1+W3 FULL TIGHTENING W1+W3 FULL TIGHTENING
5 Weight test Apply force on the upper pipe and make sure it is well connected 6 Page 8 Assemble the ceiling plate plastic cover 88Lbs/ 40Kg E A 7 Connect the three tubes according to the desired length. Each connection is made with two Y1 screws and Y2 nuts. Important – You Must use all three tubes, you can’t omit the middle tube B. You may insert all the middle tube B into the upper tube A if needed. 5 optional height levels: A B Y2 A Minimum Maximum B C 16.1” / 41cm 38” / 96.
Page 9 8 Pass the cables through the pipes. 9 Place two nuts (Z8) in the nut housing (P2). Z8 P2 10 Attach the nut-housings (P2) . Make sure that the tab is inserted into the slot. A 11 P2 Push parts P3 down on the nut-housings (P2). The upside down “T” must pass the protruding tooth (shown below).
Page 10 12a Connect the TV with the TV plate to the bracket 12b Insert and tighten the screws from both sides to create friction for the tilt mechanism. Adjust the TV tilt angle carefully. Z6 13 Z2/Z3 Level the TV.
Page 11 Disconnect the TV, remove the screws and lift the TV B DISCONNECT A A