3500-MAN-BN-11_2007
ATTENTION! Please read the following. EN WARNING! Disregarding the safety and assembly instructions may result in the falling of, and/ or damage to your electrical appliance. Opening the package represents your undertaking to closely read and follow the instructions. This mount is not intended for use in public places. For Safety Instructions, warranty and further information, go to: www.barkanmounts.
UPOZORNĚNÍ! Nedodržení bezpečnostních a montážních pokynů, může způsobit pád a následné poškození Vašeho elektronického přístroje. Po rozbalení, si pozorně přečtěte montážní návod a ve vlastním zájmu jej dodržte. Tento držák není určeno pro použití na veřejných místech. Pro bezpečnostní pokyny a pro více informací se podívejte na: www.barkanmounts.
EN Caution This mount is intended for use only with the maximum weight as indicated. Using heavier products might cause injury. ES Atención Este soporte debe ser utilizado solo con el máximo peso especificado. Utilizarlo con productos de mayor peso puede causar daños. FR Attention Utilisez ce support en ne depassant pas le poids maximum indiqué. L’utilisation de produits plus lourds pourrait causer des dégats.
EN Do not install on walls and ceilings made of: gypsum board, drywall, light processed blocks, silicate boards/bricks, a damp wall, weak or very old blocks or wooden panel! For installation on gypsum or light processed blocks please consult with an authorized installer or appropriate building specialist to install the product. ES No instalar en paredes o techos de yeso, silicate, bloques viejos, paredes húmedas, paredes débiles o paneles de madera.
Page 2 of 7 C B A x1 x1 # Z1 Z2 Z3 Z5 Z6 Y1 x1 L M mm M6 M6 M4 M8 M8 M6 16 25 20 25 45 45 = x4 x4 x4 x4 x4 x4 x1 x1 W3 W2 W1 F E D Z4 x1 Z8 Z7 x2 Y2 x4 x4 x4 x6 x4 x4 7/16" 11 mm 1/4" 6mm 5/32" 4mm 25/64" 10 mm 1 3/8" 10mm No.
Page 3 of 7 1A 400x200mm...
Page 4 of 7 200x100mm 1D Z1 /Z 2/ Z3 B Z4 Z5/Z6 Z7 Op tio n al Z4 2 1E 100x100mm Z 1/Z 2 /Z3 Z4 Z 7 O pti on a l B 2 2 2A 2B 2A W2 E W1 5/32" / 4mm 2 3/4" / 70mm A W3 3
Page 5 of 7 2B E 1/4" / 6mm 2 3/4" / 70mm 3/8" / 10mm 2 3/4" / 70mm 3/8" 10mm W2 The anchor must be sunk up to 3/8" / 10 mm into the plaster coating A W1 Min 4 Max 9 Min 2 3 W3 5 4 Z8 F 88lbs / 40kg
Page 6 of 7 6 7 21" / 55cm 16" / 41cm 1.5" / 3.8cm Y2 0.8" / 2cm Y1 Y2 B Y1 27" / 69cm Y2 Y2 Y1 Y2 32" / 83cm C 1" / 2.
8 Page 7 of 7 TV 9 Z4 10 Z1 / Z2