Page 1 TV Wall Mount Full Motion: Rotate, Fold, Swivel & Tilt For more information: barkanmounts.com 2400-MAN-ONL-11_2102 If you are satisfied with the product, please give us a 5 stars rating on the website you bought it from. If you are not satisfied please contact us at https://www.barkanmounts.com/support and we will solve the problem for you. TV Size 13”-43” 33cm-109cm TV Weight US EU 55lbs 25kg CAUTION This Mount is intended for use only with the maximum weight indicated.
ATTENTION! Please read the following. EN WARNING! Disregarding the safety and assembly instructions may result in the falling of, and/ or damage to your electrical appliance. Opening the package represents your undertaking to closely read and follow the instructions. This mount is not intended for use in public places. For Safety Instructions, warranty and further information, go to: www.barkanmounts.
UPOZORNĚNÍ! Nedodržení bezpečnostních a montážních pokynů, může způsobit pád a následné poškození Vašeho elektronického přístroje. Po rozbalení, si pozorně přečtěte montážní návod a ve vlastním zájmu jej dodržte. Tento držák není určeno pro použití na veřejných místech. Pro bezpečnostní pokyny a pro více informací se podívejte na: www.barkanmounts.
EN Caution This mount is intended for use only with the maximum weight as indicated. Using heavier products might cause injury. ES Atención Este soporte debe ser utilizado solo con el máximo peso especificado. Utilizarlo con productos de mayor peso puede causar daños. FR Attention Utilisez ce support en ne depassant pas le poids maximum indiqué. L’utilisation de produits plus lourds pourrait causer des dégats.
EN Do not install on walls and ceilings made of: gypsum board, drywall, light processed blocks, silicate boards/bricks, a damp wall, weak or very old blocks or wooden panel! For installation on gypsum or light processed blocks please consult with an authorized installer or appropriate building specialist to install the product. ES No instalar en paredes o techos de yeso, silicate, bloques viejos, paredes húmedas, paredes débiles o paneles de madera.
Page 2 Included Parts not to scale A B Bracket TV Plate x1 Z4 Z8 Z7 W2 W1 x2 x4 x6 W3 x3 Y2 x1 x3 Y3 Wall Plate Plastic Cover x1 x3 Wall Plate Plastic Cover L L mm inch 6 16 5 Z2 6 25 Z3 4 20 Z5 8 25 1 4 Z6 8 45 13 4 4 # M Z1 1 3 x1 Required Tools 7/16” 11 mm No.
Page 3 Connect the TV plate to the back of the TV Wrong Right Purchase longer screws 100 – 200mm Continue according to your TV mounting hole pattern 75 mm 1 Use the spacers (Z7) in order to adjust the screws length inside the TV 1b 1a 1a Page 4 75x75 mm hole pattern Z1/Z2/Z3 Z4 Disconnect the adaptors from the TV plate NO FORCE Z7 Optional B 2 Page 5
Page 4 1b 100x100 mm up to 200x200 mm hole pattern Position the Adaptors according to your TV’s hole pattern Max. 200mm 100mm TV 200mm 100mm 100mm Max.
Page 5 Install the Bracket on the Wall Measure the distance between the location of the TV’s mounting holes’ center (marked on the Drilling Template) and the bottom of the TV, in order to set the required height of the TV 5.2” / 13.1 cm 2 3” / 7.7cm https://www.barkanmounts.
4a Make sure all holes are drilled inside the studs Page 6 4b First use 1/4” \ 6mm drill bit 1/4” \ 6mm 1 2.75” \ 70mm Afterwards use 3/8” \ 10mm drill bit 2 3/8” \ 10mm 2.75” \ 70mm Drill with 5/32” \ 4mm drill bit 5/32” \ 4mm 2.75” \ 70mm W2 3/8”/ 10 mm The anchor must be sunk at least 3/8"/10 mm into the plaster coating W3+W1 1 W3+W1 2 2 x 360° A A 1 7/16”/ 11mm 7/16”/ 11mm 2 FULL TIGHTENING 4 x 360° FULL TIGHTENING
5 6 Weight test Apply force on the upper part of the Bracket and make sure it is well connected Assemble the Wall Plate Plastic Covers Page 7 Y2 55Lbs/ 25Kg Y3 7 Place two nuts in the plastic nut-housings Z8 8 Connect the TV Make sure that the TV Plate slots are positioned properly on 2 small bent parts
Page 8 9 In order to secure the TV and to adjust friction, insert and tighten a screw on each side of the mount.
Page 9