wePresent SharePod User's Manual Model : WHE-100 Version: 0.
Table of Contents 1 OVERVIEW .......................................................................................................................................... 3 2 PACKAGE CONTENTS.............................................................................................................................. 4 3 PHYSICAL DETAILS ................................................................................................................................. 4 4 WHAT YOU NEED .....................
1 Overview wePresent SharePod is a unique pairing solution to wirelessly connect an HDMI source to a wePresent device, enabling seamless collaboration in meetings and classrooms. Connecting an HDMI cable to the SharePod allows full mirroring of audio and video from supported HDMI sources to a display or projector, without any software installation or other configuration required.
2 3 Package Contents wePresent SharePod device Power Adapter (DC +5V, 1.
Description Play/Stop Button Press button to start/stop mirroring. HDMI In HDMI source input. Micro USB USB 2.0 port for device pairing. Ethernet 10/100M RJ-45 port. Power Jack Power Jack 5V/1.2A Reset Button Hardware reset to factory default settings. 4 What You Need wePresent WiPG device Projector or display with VGA or HDMI interface HDMI source such as Document Camera, Digital Microscope, Laptop, or DVD Player. Micro USB cable, HDMI Cable 5 wePresent SharePod pairing 5.
5.2 Manual pairing Plug in the micro USB cable from SharePod to laptop and launch the configuration tool from the USB storage, and then begin configuring the pairing information manually as below.
6 wePresent SharePod Mirroring 6.1 SharePod Mirroring 1) After powering on the SharePod, it will then connect to the target wePresent device. The short blinking blue LED indicates the system is trying to connect to target wePresent device. It will switch to static blue LED when it is connected. 2) Plug in the HDMI cable to the supported HDMI source, and mirroring will begin automatically if the wePresent device is in standby mode, or you can press the PLAY button to manually begin mirroring.
Red Mirroring Short Blinking Blue (0.5 sec) Connecting Pairing with wePresent device. Long Blinking Blue (2 sec) Waiting for HDMI Check HDMI source. Short Blinking Red (0.5 sec) Error (Wrong login code or rejected by Conference Control) Pair with wePresent device again, or disable the Conference Control. Long Blinking Red (2 sec) Pairing Mode 6.
7 Web Admin 7.1 Login Admin Page 1) Connect the SharePod to the same network of your laptop, then open a browser window to visit the SharePod web admin page. 2) Enter the password to login the admin page. (default password: admin) 7.2 System Status 1) Click on “System Status” option, it will show current system status. Model Name: Product model name Versions: Firmware version no.: Product firmware version number. Network Status: IP address:IP address of SharePod device.
7.3 Device Setup 1) Click on “Device Setup” option, it will show the device setting items. : The IP address of target wePresent device. : The login code of target wePresent device. : The name of the connected SharePod : Normal / High.
7.4 Network Setup 1) Click on “Network Setup” option, it will show the network setting items. < IP Setup> You can select “obtain IP address automatically” or “Use the following IP address” to manually enter the IP address. The default setting is as follows: IP Address: 192.168.100.10. Subnet Mask: 255.255.255.0 Default Gateway: 192.168.100.10 DNS Server: 192.168.100.10 7.
Note: 1. The WiFi 5G DFS band is not supported. 7.6 Change Passwords 1) Click on “Change Password” option, you can change the password setting for “Admin”. (Length: up to 8 characters) : Confirm and Save modifications.
7.7 Reset to Default 1) Click on “Reset to Default” option to restore factory default settings. : Confirm and take action. *** You can also restore factory default setting from SharePod box reset button. You can find the reset button underneath the box. Please follow below procedures. 1. Press [Reset] button and Hold. 2. Turn on wePresent SharePod box. 3. Press more than 10 seconds and release [Reset] button. 4. Factory settings will then be restored. 7.
Warning: Do not power off wePresent SharePod while firmware upgrade in progress, otherwise your SharePod will be damaged and must be returned to the vendor for service and repair.
7.9 Reboot System ♦ ♦ 7.10 Click on “Reboot System” option to restart the SharePod. Click on button: reboot system automatically. Logout 1) Click on “logout” on the upper right corner to logout of the administration webpage and return back to the web management home page.
FCC FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.