ClickShare model C 5010S Safety manual ENABLING BRIGHT OUTCOMES
Barco NV Beneluxpark 21, 8500 Kortrijk, Belgium www.barco.com/en/support www.barco.com Registered office: Barco NV President Kennedypark 35, 8500 Kortrijk, Belgium www.barco.com/en/support www.barco.
Safety 1 Safety About this chapter Read this chapter attentively, it contains important information to prevent personal injury while using ClickShare. It also includes several cautions to prevent damage to the ClickShare product. Ensure that you understand and follow all safety guidelines, safety instructions and warnings in this chapter before using your ClickShare.
Safety • Safety check: Upon completion of any service or repairs to this device, ask the service technician to perform safety checks to determine that the product is in proper operating condition. Heat and Fire Hazard Warning – risk of fire: do not place flammable or combustible materials near the device! Barco products are designed and manufactured to meet the most stringent safety regulations. This device radiates heat on its external surfaces during normal operation, which is both normal and safe.
Safety You may also find helpful the following booklet, prepared by the FCC: "How to Identify and Resolve Radio-TV Interference Problems." This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402. Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commissions rules.
Safety Caution: Exposure to Radio Frequency Radiation. 1. To comply with the Canadian RF exposure compliance requirements, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. 2. To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons.
Safety 1.9 根據NCC低功率電波輻射性電機管理辦法 規定 根據NCC低功率電波輻射性電機管理辦法 規定 第十二條 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性 及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼 續使用。 前項合法通信,指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 底座 xxxxxxx 按鈕 xxxxxx 警告 應避免影響附近雷達系統之操作。 高增益指向性天線只得應用於固定式點對點系統。 電磁波曝露量MPE標準值1mW/cm2,送測產品實測值為:0.082 mW/cm2,建議使用時至少距離人體20公分 1.10 International Type Approval SRRC certification 型号核准代码以实物铭牌显示 KCC certification 1.
Safety 1.12 CE Certification CE Certification R9861522EU is fit for use in all European Union countries, EFTA and Turkey. AT CZ EL HU LT PT TR BE DK ES IS LU RO UK BG DE FI IT NL SE CH EE FR LI NO SI CY IE HR LV PL SK Image 1-1 The C 5010S is restricted to indoor use only when operating in the 5150 to 5250 Mhz frequency range. Hereby, Barco NV declares that the radio equipment type C 5010S is in compliance with the Directive 2014/53/EU.
Safety R5900094 /03 ClickShare model C 5010S 9
R5900094 /03 | 2019-09-24 Barco NV | Beneluxpark 21, 8500 Kortrijk, Belgium Registered office: Barco NV | President Kennedypark 35, 8500 Kortrijk, Belgium www.barco.