CS-100 User guide R5900024/00 21/12/2014
Barco NV President Kennedypark 35, 8500 Kortrijk, Belgium Phone: +32 56.23.32.11 Fax: +32 56.26.22.62 Support: www.barco.com/en/support Visit us at the web: www.barco.
Copyright © All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or stored in a retrieval system without the prior written consent of Barco. Trademarks Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights of their respective holders.
1. This Software License is between you and BARCO NV, a corporation organized and existing under the laws of Belgium registered under number BE 0473.191.041, Commercial Companies’ Register of Kortrijk, having its registered office President Kennedypark, 35 at B-8500 Kortrijk, Belgium ("Barco") for the use of the Software.
6. YOU UNDERSTAND THAT THE SOFTWARE IS BEING PROVIDED TO YOU "AS IS".
personal data) for any reason Barco sees fit, including but not limited to providing services to you / your organization, allowing third party to access to such Functional Information and/or to provide services to you / your organization . You hereby explicitly give consent that Barco may gather, access, preserve, and/or disclose the personal data you provide to us (e.g.
Open Source component Open Source License alsa-plugins http://www.gnu.org/licenses/gpl.html http://www.gnu.org/licenses/lgpl.html avahi http://www.gnu.org/licenses/lgpl.html Bootstrap (3.1.1) https://github.com/twbs/bootstrap/blob/master/LICENSE bootstrap-dialog https://github.com/twbs/bootstrap/blob/master/LICENSE bootstrap-slider.js v2.0.0 http://www.apache.org/licenses/LICENSE-2.0 busybox http://opensource.org/licenses/GPL-2.0 Chart.js https://github.com/nnnick/Chart.
Open Source component Open Source License iw http://opensource.org/licenses/BSD-3-Clause Jasny Bootstrap (3.1.3) http://www.apache.org/licenses/LICENSE-2.0 jQuery Form Plugin (3.51.0-2014.06.20) https://github.com/malsup/form#copyright-and-license jQuery JavaScript Library (1.11.3) https://jquery.org/license/ jQuery Password Strength plugin for Twitter Bootstrap https://github.com/ablanco/jquery.pwstrength.bootstrap/blob/master/GPL-LICENSE.txt https://github.com/ablanco/jquery.pwstrength.
Open Source component Open Source License libsm6 http://metadata.ftp-master.debian.org/changelogs//main/libs/libsm/libsm_1.2.2-1_copyright libstdc++6 http://www.gnu.org/licenses/gpl.html libswscale http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html libtalloc2 http://www.gnu.org/licenses/lgpl.html libusb http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html libva Copyright (c) 2011, Advanced Micro Devices, Inc. All rights reserved. libX11 http://opensource.
Open Source component Open Source License qt http://doc.qt.io/qt-5/lgpl.html read-edid Free license Respond.js https://github.com/scottjehl/Respond/blob/master/LICENSE-MIT rockbox-imxtools http://www.gnu.org/licenses/old-licenses/gpl-2.0.html rsync (<3.0.0) http://www.gnu.org/licenses/old-licenses/gpl-2.0.html rsync (>=3.0.0) http://www.gnu.org/licenses/gpl.html rsyslog http://www.gnu.org/licenses/gpl.html splashutils http://www.gnu.org/licenses/gpl.html sprintf-js https://opensource.
If this equipment does cause interference to radio or television reception, the user may try to correct the interference by one or more of the following measures : • Re-orientation of the receiving antenna for the radio or television. • Relocate the equipment with respect to the receiver. • Plug the equipment into a different outlet so that the equipment and receiver are on different branch circuits. • Fasten cables connectors to the equipment by mounting screws.
This radio transmitter 9393B-R9861510 has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Table of contents TABLE OF CONTENTS 1. Introduction . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 3 1.1 1.2 1.3 Versions of the product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 About this guide . . . . . . . . . . . .
Table of contents 2 R5900024 CS-100 21/12/2014
1. Introduction 1. INTRODUCTION Overview • Versions of the product • About this guide • Symbols and fonts 1.1 Versions of the product Regional versions Depending on the location where you buy the CS-100 product, the Base Unit and accessories are regionalized. By the time of release of this manual, 3 regional versions of CS-100 are available: • Europe & Japan • North America • China The regional version of your CS-100 cannot be changed. That means that you cannot use it in another region.
1. Introduction The User Guide describes how to use your CS-100. It also contains a basic troubleshooting part where you can search for a solution when a problem occurs. 1.3 Symbols and fonts Symbol overview The following icons are used in the manual : Caution Warning Info, term definition. General info about the term Note: gives extra information about the described subject Tip: gives extra advice about the described subject Font overview 4 • Buttons are indicated in bold, e.g. OK.
2. Introduction to CS-100 2. INTRODUCTION TO CS-100 Overview • About the CS-100 • About the Base Unit • About the Button • Mobile Device Support 2.1 About the CS-100 CS-100 sets CS-100 makes connecting to the meeting room’s video system a matter of clicking a Button. This CS-100 only helps the presenter get the presentation on-screen in a second, but it also allows the other people in the meeting to participate more actively. The result is enhanced meeting efficiency and better decision-making.
2. Introduction to CS-100 2.2 About the Base Unit Base Unit functionality The Base Unit receives the wireless input from the Buttons and controls the content of the meeting room display and the sound of the meeting room’s audio system. The Base Unit can be inside a cabinet in the meeting room, or put on the meeting room table or mounted on a wall. Check the Installation Guide for instructions on how to install the Base Unit.
2. Introduction to CS-100 2.3 About the Button Button functionality A Button contains three main functional components. 1 2 3 Image 2-3 The Button 1 USB connector 2 Button 3 LED ring Table 2-5 Handle the Button cable with care. Rough handling might cause defects. USB connector Using the USB connector the Button can be plugged into a laptop (for sharing your screen) or in the Base Unit (for pairing the Button to the Unit or updating its software).
2. Introduction to CS-100 2.4 Mobile Device Support Overview The below list of Apps are supported by ClickShare and can be installed on your mobile device from Google Play or Apple App Store. Before you can use your mobile device with ClickShare, you have to connect the mobile device Wi-Fi with the ClickShare Base Unit Wi-Fi. Follow the instructions as given in your mobile device user guide.
3. Getting started 3. GETTING STARTED Overview • 3.1 Activating the base unit • Basic Use • User Interface • Capture more • Shared desktop: primary - extended • Audio configuration • Pairing Activating the base unit About power mode The Base Unit is powered via an external power adapter. Once connected, the Base Unit is automatically switched in standby mode. For more information about power connection, see CS-100’s installation manual. On and off 1. Push the button shortly.
3. Getting started Image 3-2 The LEDs of the Button start flashing white. On your laptop a new drive appears. Two situations are possible now: - A launcher is preinstalled on your laptop (downloaded from the Base Unit or Barco website, or deployed company-wide by your IT department). ClickShare is immediately available. You can continue with step 4. - nothing is pre-installed. Continue with step 2. 2. Browse to and double-click the ClickShare drive on your laptop.
3. Getting started The ClickShare client software starts and its icon appears in the system tray. On a Windows computer: On a Macintosh: When the system is ready for use, a message appears close to the systray icon. Image 3-5 The LEDs of the Button are static white. 4. To share your screen on the display, click the Button. The LEDs of the Button become static red and your screen appears on the display.
3. Getting started 3.4 Click To Result Start sharing to show your screen on the display. The LEDs of your Button become red. Show me fullscreen to bring the content of your screen on the display full screen. The screens of other users that were shown on the display disappear. Settings... select the way to connect. Via ClickShare Button or via a network connection Connected via Button or via network Pair Button to pair the connected Button with the Base Unit Button is ready for use.
3. Getting started Checked: capture with more details but may have a lower performance. Not checked: capture will be faster but may lose some of the details Starting the client automatically in Capture More The Capture more mode can be started by default so that the Aero Glass settings are not disabled. To do so, an environment variable should be introduced in your windows. Ask you administrator or consult your windows documentation to find out how to create.
3. Getting started 2 3 2 1 Image 3-10 PC with two extended screens connected. The first extended screen, screen 2 will always be captured and displayed on the meeting room display. To know if your system supports the extended desk top feature, press Window key + P. It should bring up the following pop-up on screen: Image 3-11 How to select 1. Right click on the ClickShare icon in the system tray (1). Image 3-12 Shared desktop selection A context menu opens. 2. Select Shared Desktop (2). 3.
3. Getting started Known issue • 3.6 Virtual Extended Desktop not supported on some Windows7 and Windows8 systems due to a problem in recent versions of the AMD graphical driver. Downgrade to an older version of the driver might resolve the issue but make sure the AMD driver updated above version 13.8 . Audio configuration Audio configuration The connected user must control his own audio signal using the audio configuration of his computer.
3. Getting started Image 3-14 Speakers ClickShare, default 2. Click Adjust Audio Properties (1). The Sound and Audio Devices Properties window opens. 3. Select Audio tab (2). 4. Click on the drop down box in the Sound playback pane and select ClickShare (3).. 5. Click Apply or OK to activate the new setting. Set ClickShare as default on MAC 1. Click on the Apple logo on the menu bar (1) and select System Preferences.. ..(2).
3. Getting started Image 3-15 Speakers ClickShare, default 2. Click on the Speaker icon (3). The Sound window opens. 3. Select the Output tab (4) and activate ClickShare (5). 3.7 Pairing Pairing of the Buttons with the Base Unit To be able to use a Button it should be assigned to the Base Unit you are using. This process is called pairing. By default, the two Buttons delivered with the CS-100 set are already paired to the specific Base Unit.
3. Getting started Image 3-16 Pair button Both the LEDs of the Button and the LEDs of the Base Unit are blinking white. This means pairing is in progress. The Base Unit automatically checks whether the software of the Button is up to date. If not, the Base Unit updates the Button software. This may take more time. During the pairing and update process, a small status bar is display.
4. Troubleshooting 4. TROUBLESHOOTING 4.1 Basic Troubleshooting Problem solving In this chapter some problems that might occur while using CS-100 are listed. For each problem possible causes are given and a solution is proposed. If you cannot solve the problem yourself, please contact your local IT administrator. Problem Cause Solution Your screen is not shown on the display when pressing the Button. You are the second person that wants to share the content to the display.
4. Troubleshooting Problem Cause After inserting the Button into your laptop, No automatic refresh of drives. you cannot find the ClickShare drive. Bad connection at USB port on laptop. Windows tries to assign the ClickShare drive to an already reserved drive letter Some programs of Windows are not shown on the display. 20 Use of overlays, 3D or hardware acceleration in the GPU. Solution Refresh the view on your laptop. • Reconnect to the USB port. • Try another USB port. • Reboot your laptop.
5. Environmental information 5. ENVIRONMENTAL INFORMATION 5.1 Disposal information Disposal Information Waste Electrical and Electronic Equipment This symbol on the product indicates that, under the European Directive 2012/19/EU governing waste from electrical and electronic equipment, this product must not be disposed of with other municipal waste. Please dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
5. Environmental information 底架 x 0 x 0 0 0 Chassis 电源供应器 x 0 x 0 0 0 Power Supply Unit 文件说明书 0 0 0 0 0 0 Paper Manuals 这个表被制备按照规定SJ/T 11364 This table is prepared in accordance with the provisions of SJ/T 11364. O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下. O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363. X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准规定的限量要求.
