Wireless Presentation System (Model Name: WGA-510P) Version: 1.
WGA-510P 1. Package Contents WGA-510P Box USB Token Power Adapter (DC +5V, 2.6A) WiFi Antenna x 2 Wall-Mount Kit Quick Installation Guide Warranty Card CE DoC 2. USB Token Contents MirrorOp Installer for Windows MirrorOp Installer for Mac Executable MirrorOp Application for Windows Executable MirrorOp Application for Mac SVS Driver (For Mac Extended Screen) SNMP MIB File User Manual 3.
WGA-510P • Rear Panel USB Port RJ-45 VGA HDMI Audio Jack Power Jack Antenna Antenna WiFi Antenna USB Port (Rear) USB Port for USB IWB Device (HID Type) RJ-45 10/100M RJ-45 Port VGA VGA Connector HDMI HDMI Connector Audio Jack Audio Jack (3.5mm) Power Jack Power Jack (5V/2.6A) Each USB port can supply up to 5V/0.5A to the touch device/USB drive.
WGA-510P 4. What You Might Need Projector/Display with VGA/HDMI Interface Windows or Mac PC/Laptop Apple iPhone, iPad or iPod Touch Android Phone or Tablet Speaker (Optional, for Audio Projection) USB Mouse and Keyboard (Optional, for Remote Desktop) USB HID Touch Screen/IWB Device (Optional, for USB over IP) 5. Quick Installation 1) Connect the WGA-510P box to the projector/display through the VGA/HDMI port and turn on the projector/display power.
WGA-510P 6. Windows Do not support Windows Phone, Windows RT. 6.1 Install the application 1) Make sure your PC is WiFi-enabled, and connect your PC to the WGA-510P box through WiFi. You can find the WiFi network name (SSID) of your WGA-510P box on the standby screen of the projector/display. [Default SSID is WGA-510P] 2) Open your browser, and enter the IP address of your WGA-510P box in the address bar of the browser. You can find the IP address on the standby screen of the projector/display.
WGA-510P 3) Download the software (i.e. “MirrorOp”) for “Windows 7 / 8 / 10”, and follow the Setup Wizard to install the software. (You can also install the “MirrorOp” software from the USB token directly.) Make sure the software is not blocked by your firewall. 6.2 Start the application 1) Click the MirrorOp icon on the desktop to execute the application, or launch the MirrorOp application from the USB token directly. 2) It will start to search for the WGA-510P device automatically.
WGA-510P 3) Click on the WGA-510P device and enter the login code shown on the display. 4) Click the “PLAY” button to start the screen sharing.
WGA-510P 7. Mac 7.1 Install the application 1) Make sure your Mac is WiFi-enabled, and connect your Mac to the WGA-510P box through WiFi. 2) Open your browser, and enter the IP address of your WGA-510P box in the address bar of the browser. You can find the IP address on the standby screen of the projector/display. [Default IP address is 192.168.100.10] 3) Download the software for “Mac 10.9~10.11”, and you will see a DMG file with a MirrorOp icon .
WGA-510P 4) Drag the MirrorOp icon into the Applications folder. 7.2 Start the application 1) Click on the MirrorOp icon from the Applications folder to execute the application. 2) It will start to search for the WGA-510P device automatically. 3) Click on the WGA-510P device and enter the login code shown on the display.
WGA-510P 4) Click the “PLAY” button to start the screen sharing. Safety : Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WGA-510P -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement: 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2.
