User Guide

Quick Start Guide
Radar-Based Sensors for Detection and Measurement of Moving and Stationary Targets
This guide is designed to help you set up and install the R-GAGE K50R sensor. For complete information on programming,
performance, troubleshooting, dimensions, and accessories, please refer to the Instruction Manual at www.bannerengineering.com.
Search for p/n 226219 to view the Instruction Manual. Use of this document assumes familiarity with pertinent industry standards
and practices.
WARNING:
• Do not use this device for personnel protection
• Using this device for personnel protection could result in serious injury or death.
• This device does not include the self-checking redundant circuitry necessary to allow its use in
personnel safety applications. A device failure or malfunction can cause either an energized (on) or de-
energized (off) output condition.
Overview
The K50R is an industrial radar sensor that uses high frequency radio waves from an internal antenna.
Figure 1. Sensing Range
D0
Measurement
Reference Point
D1 D2
Sensing Range
Reliable detection and
measurement of stationary
and moving objects
Detection
possible, but
not reliably
Model D0 (m) D1 (m) D2 (m)
K50RF-8060-LDQ 0 0.1 2.5
Features and Indicators
Figure 2. K50R Features
1
2
3
LED Color Description
1 Output 1 Amber Discrete output status
2
Power/Signal
Strength
Green or Blue Power ON and signal strength indication
3 Output 2 Amber Discrete output status
R-GAGE
®
K50R Radar Sensor
Original Document
226218 Rev. A
31 January 2022
226218